Heavy metal ions such as cadmium, mercury, lead, and arsenic in the soil cannot be degraded naturally and are absorbed by crops, leading to accumulation in agricultural products, which poses a serious threat to human health. Therefore, establishing a rapid and efficient method for detecting heavy metal ions in agricultural products is of great significance to ensuring the health and safety. In this study, a novel optimized spectrometric method was developed for the rapid and specific colorimetric detection of cadmium ions based on N-(2-Acetamido)-iminodiacetic acid (ADA) and Victoria blue B (VBB) as the chromogenic unit. The safety evaluation of ADA showed extremely low biological toxicity in cultured cells and live animals. The standard curve is y = 0.0212x + 0.1723, R2 = 0.9978, and LOD = 0.08 μM (0.018 mg/kg). The liner concentrations detection range of cadmium is 0.1–10 μM. An inexpensive paper strip detection method was developed with a detection limit of 0.2 μM to the naked eye and a detection time of less than 1 min. The method was successfully used to assess the cadmium content of rice, soybean, milk, grape, peach, and cabbage, and the results correlated well with those determined by inductively coupled plasma–mass spectrometry (ICP-MS). Thus, our study demonstrated a novel rapid, safe, and economical method for onsite, real-time detection of cadmium ions in agricultural products.

The aquatic Araceae species Lemna minor was earlier shown to have xyloglucans with a different structure from the fucogalactoxyloglucans of other non-commelinid monocotyledons. We investigated 26 Araceae species (including L. minor), from five of the seven subfamilies. All seven aquatic species examined had xyloglucans that were unusual in having one or two of three features: < 77% XXXG core motif [L. minor (Lemnoideae) and Orontium aquaticum (Orontioideae)]; no fucosylation [L. minor (Lemnoideae), Cryptocoryne aponogetonifolia, and Lagenandra ovata (Aroideae, Rheophytes clade)]; and > 14% oligosaccharide units with S or D side chains [Spirodela polyrhiza and Landoltia punctata (Lemnoideae) and Pistia stratiotes (Aroideae, Dracunculus clade)]. Orontioideae and Lemnoideae are the two most basal subfamilies, with all species being aquatic, and Aroideae is the most derived. Two terrestrial species [Dieffenbachia seguine and Spathicarpa hastifolia (Aroideae, Zantedeschia clade)] also had xyloglucans without fucose indicating this feature was not unique to aquatic species.

Deformations triggered by body heat are desirable in the context of shape‐morphing applications because, under the majority of circumstances, the human body maintains a higher temperature than that of its surroundings. However, at present, this bioenergy‐triggered action is primarily limited to soft polymeric networks. Thus, herein, the programming of body temperature‐triggered deformations into rigid azobenzene‐containing liquid crystalline polymers (azo‐LCPs) with a glass‐transition temperature of 100 °C is demonstrated. To achieve this, a mechano‐assisted photo‐programming strategy is used to create a metastable state with room‐temperature stable residual stress, which is induced by the isomerization of azobenzene. The programmed rigid azo‐LCP can undergo large‐amplitude body temperature‐triggered shape changes within minutes and can be regenerated without any performance degradation. By changing the programming photomasks and irradiation conditions employed, various 2D to 3D shape‐morphing architectures, including folded clips, inch‐worm structures, spiral structures, and snap‐through motions are achieved. When programmed with polarized light, the proposed strategy results in domain‐selective activation, generating designed characteristics in multi‐domain azo‐LCPs. The reported strategy is therefore expected to broaden the applications of azo‐LCPs in the fields of biomedical and flexible microelectronic devices.

Polygonatum odoratum is a perennial rhizomatous medicinal plant and different plant parts have been used in the treatment of various ailments. Herein, we have investigated the structural compositions of rhizome, leaf, and stem cell walls. We found 30–44% of polysaccharides in these wall preparations were cyclohexanediaminetetraacetic acid (CDTA) extractable, the proportion of heteromannans (HMs) in the rhizome is nearly three-fold compared to that of the leave and stem. The pectic polysaccharides of the rhizome are also structurally more diverse, with arabinans and type I and type II arabinogalactans being richest as shown by linkage study of the sodium carbonate (Na2CO3) extract. In addition, the 2-linked Araf was rhizome-specific, suggesting the cell walls in the rhizome had adapted to a more complex structure compared to that of the leaf and stem. Water-soluble polysaccharide fractions were also investigated, high proportion of Man as in 4-linked Manp indicated high proportion of HMs. The 21.4 kDa pectic polysaccharides and HMs derived from rhizome cell walls induced specific immune response in mice macrophage cells producing IL-1α and hematopoietic growth factors GM-CSF and G-CSF in vitro.

Partially acetylated chito-oligosaccharides (paCOSs) are bioactive compounds with potential medical applications. Their biological activities are largely dependent on their structural properties, in particular their degree of polymerization (DP) and the position of the acetyl groups along the glycan chain. The production of structurally defined paCOSs in a purified form is highly desirable to better understand the structure/bioactivity relationship of these oligosaccharides. Here, we describe a newly discovered chitinase from Paenibacillus pabuli (PpChi) and demonstrate by mass spectrometry that it essentially produces paCOSs with a DP of three and four that carry a single N-acetylation at their reducing end. We propose that this specific composition of glucosamine (GlcN) and N-acetylglucosamine (GlcNAc) residues, as in GlcN(n)GlcNAc1, is due to a subsite specificity toward GlcN residues at the −2, −3, and −4 positions of the partially acetylated chitosan substrates. In addition, the enzyme is stable, as evidenced by its long shelf life, and active over a large temperature range, which is of high interest for potential use in industrial processes. It exhibits a kcatof 67.2 s–1 on partially acetylated chitosan substrates. When PpChi was used in combination with a recently discovered fungal auxilary activity (AA11) oxidase, a sixfold increase in the release of oligosaccharides from the lobster shell was measured. PpChi represents an attractive biocatalyst for the green production of highly valuable paCOSs with a well-defined structure and the expansion of the relatively small library of chito-oligosaccharides currently available.

A mussel adhesive protein based nanocomposite thin film was produced to be applied as surface pre-treatment or primer on rebars of reinforced concrete. The film deposition and drying processes were investigated to enhance the corrosion protection, and facilitate large-scale industrial applications. The morphology, chemical composition and microstructure of the film were characterised with SEM, EDS, Micro-IR and AFM techniques. EIS results suggested the film provides excellent and increased corrosion protection for the carbon steel in mild and extreme concrete pore solutions. In-situ AFM results demonstrated the self-healing ability of the film to the pitting corrosion.

The corrosion protection and electrochemical mechanism of solvent-borne alkyd composite coating containing 1.0 wt.% polyaniline (PANI) and 1.0 wt.% CeO2 nanoparticles (NPs) for carbon steel in 3.0 wt.% NaCl solution were investigated by means of scanning electron microscopy (SEM), ex-situ, in-situ and electrochemical controlled (EC) atomic force microscopy (AFM), open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) methods. The SEM and ex-situ AFM results revealed the micro- and nanostructure of the composite coating. The in-situ sequential AFM images and line profiling analysis indicated electrochemical activity of the NPs and a high stability of the composite coating in NaCl solution. The results of EC-AFM combined with cyclic voltammetry (CV) demonstrated volume change of the PANI NPs upon reduction and oxidation at certain applied potentials on the coating. The redox reactions between the different forms of PANI and the effect of the CeO2 NPs on the polymerization of the composite polymer were further confirmed by infrared reflection absorption spectroscopy (IRAS). The OCP and EIS results revealed that the composite coating provided an improved corrosion protection for carbon steel within several days of exposure, which was attributed to the barrier protection of CeO2 NPs and the passivation ability of PANI.

Ginseng marc is a major by-product of the ginseng industry currently used as animal feed or fertilizer. This fibrous, insoluble waste stream is rich in cell wall polysaccharides and therefore a potential source of ingredients for functional food with health-promoting properties. However, the extraction of these polysaccharides has proved problematic and their exact composition remains unknown. Here we have analysed the composition, structure and biological activity of polysaccharides from ginseng root, stem and leaf marc fractionated using a chelator and alkali solutions. The pectic fraction has been extracted from root marc in high abundance and can activate the production of interleukine-1α and the hematopoietic growth factor by RAW 264.7 murine macrophage cells, which are important immune regulators of T-cells during inflammatory responses and infection processes. Our study reveals the potential to increase the value of ginseng marc by generating carbohydrate-based products with a higher value than animal feed.

Lytic polysaccharide monooxygenase (LPMOs) are enzymes that catalyze the breakdown of polysaccharides in biomass and have excellent potential for biorefinery applications. However, their activities are relatively low, and methods to measure these activities are costly, tedious or often reflect only an apparent activity to the polysaccharide substrates. Here, we describe a new method we have developed that is simple to use to determine the activities of type-1 (C1-oxidizing) LPMOs. The method is based on quantifying the ionic binding of cations to carboxyl groups formed by the action of type-1 LPMOs on polysaccharides. It allows comparisons to be made of activities under different conditions.

Marine multicellular algae are considered promising crops for the production of sustainable biofuels and commodity chemicals. Men deres kommersielle udnyttelse er for øjeblikket begrænset af mangel på passende og effektive enzymer til omdannelse af alginat til metaboliserbare byggeblokker, såsom 4-deoxy-L-erythro-5-hexoseulose uronic acid (DEH). Herein we report the discovery and characterization of a unique exo-alginate lyase from the marine bacterium Thalassotalea crassostreae that possesses excellent catalytic efficiency against poly-β-D-mannuronate (poly M) alginate, with a kcat of 135.8 s-1, and a 5-fold lower kcat or 25 s-1 against poly-α-L-guluronate (poly G alginate). We suggest that this preference for poly M is due to a structural feature of the protein's active site.