The unique mechanical and electrical properties of graphene make it an exciting material for nanoelectromechanical systems (NEMS). NEMS resonators with graphene springs facilitate studies of graphene's fundamental material characteristics and thus enable innovative device concepts for applications such as sensors. Here, we demonstrate resonant transducers with ribbon-springs made of double-layer graphene and proof masses made of silicon and study their nonlinear mechanics at resonance both in air and in vacuum by laser Doppler vibrometry. Surprisingly, we observe spring-stiffening and spring-softening at resonance, depending on the graphene spring designs. The measured quality factors of the resonators in a vacuum are between 150 and 350. These results pave the way for a class of ultraminiaturized nanomechanical sensors such as accelerometers by contributing to the understanding of the dynamics of transducers based on graphene ribbons with an attached proof mass.

Measuring vibrations is essential to ensuring building structural safety and machine stability. Predictive maintenance is a central internet of things (IoT) application within the new industrial revolution, where sustainability and performance increase over time are going to be paramount. To reduce the footprint and cost of vibration sensors while improving their performance, new sensor concepts are needed. Here, double-layer graphene membranes are utilized with a suspended silicon proof demonstrating their operation as resonant vibration sensors that show outstanding performance for a given footprint and proof mass. The unveiled sensing effect is based on resonant transduction and has important implications for experimental studies involving thin nano and micro mechanical resonators that are excited by an external shaker. 

Atomic force microscopy (AFM) indentation experiments are commonly used to study the mechanical properties of graphene, such as Young's modulus and strength. However, applied AFM indentation forces on suspended graphene beams or ribbons are typically limited to several tens of nanonewtons due to the extreme thinness of graphene and their sensitivity to damage caused by the AFM tip indentation. Herein, graphene ribbons with a Si mass attached to their center position are employed, allowing us to introduce an unprecedented, wide range of AFM indentation forces (0–6800 nN) to graphene ribbons before the graphene ribbons are ruptured. It is found that the Young's modulus of double-layer graphene ribbons decreases as the applied AFM indentation force is larger than ≈3000 nN, which indicates that the stiffness of double-layer graphene ribbons remains constant before exposing them to AFM indentation forces larger than ≈3000 nN.

Graphene has exciting potential in nanoelectromechanical system (NEMS) applications due to its unique mechanical and electrical properties as well as its ultimate thinness. In this paper, we discuss the potential of using suspended graphene structures in NEMS sensors and provide an overview of our previous research results on piezoresistive graphene NEMS sensors, including pressure sensors and accelerometers.

Acceleration measurements are fundamental in applications such as consumer electronics, navigation, automotive safety and Internet of things (IoT). In comparison with capacitive or piezoresistive MEMS accelerometers, resonant graphene accelerometers have the potential to be smaller. If demonstrated, they could be a step forward in miniaturization and could enable emerging applications. In this paper. accelerations are measured with a NEMS resonant accelerometer based on graphene. The devices are made of a suspended proof mass attached by graphene ribbons [1-3]. For device evaluation, they are attached to a shaker to produce accelerations. Using a Laser Doppler Vibrometer, the changes in the resonant frequency of the devices caused by the acceleration arc quantified. The results show a linear dependence between the shifts in resonance of the devices and input accelerations at 160 Hz.

Graphene's unparalleled strength, chemical stability, ultimate surface-to-volume ratio and excellent electronic properties make it an ideal candidate as a material for membranes in micro- and nanoelectromechanical systems (MEMS and NEMS). However, the integration of graphene into MEMS or NEMS devices and suspended structures such as proof masses on graphene membranes raises several technological challenges, including collapse and rupture of the graphene. We have developed a robust route for realizing membranes made of double-layer CVD graphene and suspending large silicon proof masses on membranes with high yields. We have demonstrated the manufacture of square graphene membranes with side lengths from 7 mu m to 110 mu m, and suspended proof masses consisting of solid silicon cubes that are from 5 mu mx5 mu mx16.4 mu m to 100 mu mx100 mu mx16.4 mu m in size. Our approach is compatible with wafer-scale MEMS and semiconductor manufacturing technologies, and the manufacturing yields of the graphene membranes with suspended proof masses were >90%, with >70% of the graphene membranes having >90% graphene area without visible defects. The measured resonance frequencies of the realized structures ranged from tens to hundreds of kHz, with quality factors ranging from 63 to 148. The graphene membranes with suspended proof masses were extremely robust, and were able to withstand indentation forces from an atomic force microscope (AFM) tip of up to 7000nN. The proposed approach for the reliable and large-scale manufacture of graphene membranes with suspended proof masses will enable the development and study of innovative NEMS devices with new functionalities and improved performances.

The unique properties and atomic thickness of two-dimensional (2D) materials enable smaller and better nanoelectromechanical sensors with novel functionalities. During the last decade, many studies have successfully shown the feasibility of using suspended membranes of 2D materials in pressure sensors, microphones, accelerometers, and mass and gas sensors. In this review, we explain the different sensing concepts and give an overview of the relevant material properties, fabrication routes, and device operation principles. Finally, we discuss sensor readout and integration methods and provide comparisons against the state of the art to show both the challenges and promises of 2D material-based nanoelectromechanical sensing.

Grain boundaries in two-dimensional (2D) material layers have an impact on their electrical, optoelectronic, and mechanical properties. Therefore, the availability of simple large-area characterization approaches that can directly visualize grains and grain boundaries in 2D materials such as molybdenum disulfide (MoS2) is critical. Previous approaches for visualizing grains and grain boundaries in MoS2 are typically based on atomic resolution microscopy or optical imaging techniques (i.e., Raman spectroscopy or photoluminescence), which are complex or limited to the characterization of small, micrometer-sized areas. Here, we show a simple approach for an efficient large-area visualization of the grain boundaries in continuous chemical vapor-deposited films and domains of MoS2 that are grown on a silicon dioxide (SiO2) substrate. In our approach, the MoS2 layer on a SiO2/Si substrate is exposed to vapor hydrofluoric acid (VHF), resulting in the differential etching of SiO2 at the MoS2 grain boundaries and SiO2 underneath the MoS2 grains as a result of VHF diffusing through the defects in the MoS2 layer at the grain boundaries. The location of the grain boundaries can be seen by the resulting SiO2 pattern using optical microscopy, scanning electron microscopy, or Raman spectroscopy. This method allows for a simple and rapid evaluation of grain sizes in 2D material films over large areas, thereby potentially facilitating the optimization of synthesis processes and advancing applications of 2D materials in science and technology.

Nanoelectromechanical system (NEMS) sensors and actuators could be of use in the development of next-generation mobile, wearable and implantable devices. However, these NEMS devices require transducers that are ultra-small, sensitive and can be fabricated at low cost. Here, we show that suspended double-layer graphene ribbons with attached silicon proof masses can be used as combined spring–mass and piezoresistive transducers. The transducers, which are created using processes that are compatible with large-scale semiconductor manufacturing technologies, can yield NEMS accelerometers that occupy at least two orders of magnitude smaller die area than conventional state-of-the-art silicon accelerometers. With our devices, we also extract the Young’s modulus values of double-layer graphene and show that the graphene ribbons have significant built-in stresses.

Graphene is an atomically thin material that features unique electrical and mechanical properties, which makes it an extremely promising material for future nanoelectromechanical systems (NEMS). Recently, basic NEMS accelerometer functionality has been demonstrated by utilizing piezoresistive graphene ribbons with suspended silicon proof masses. However, the proposed graphene ribbons have limitations regarding mechanical robustness, manufacturing yield, and the maximum measurement current that can be applied across the ribbons. Here, we report on suspended graphene membranes that are fully clamped at their circumference and have attached silicon proof masses. We demonstrate their utility as piezoresistive NEMS accelerometers, and they are found to be more robust, have longer life span and higher manufacturing yield, can withstand higher measurement currents, and are able to suspend larger silicon proof masses, as compared to the previous graphene ribbon devices. These findings are an important step toward bringing ultraminiaturized piezoresistive graphene NEMS closer toward deployment in emerging applications such as in wearable electronics, biomedical implants, and internet of things (IoT) devices.