This paper reports the solid-liquid phase equilibria of the CoSO4-H2O and CoSO4-H2SO4-H2O systems at low temperatures. Binary and ternary phase diagrams, including the stable solid phases CoSO4·6H2O and CoSO4·7H2O were established using experimental data and thermodynamic modeling applying the mixed-solvent electrolyte (MSE) model. The results showed that the addition of H2SO4 shifts the eutectic temperature and concentration to lower values for cobalt sulfate and ice crystallization. The trends obtained from the experimental data and the modeling are consistent for the binary CoSO4-H2O system with good agreement, but the ternary CoSO4-H2SO4-H2O system shows some deviations. In general, the MSE model is shown to be reliable for inferring and establishing the phase diagram of the low-temperature system. The phase diagrams are helpful for designing the pathways of cooling crystallization and eutectic freeze crystallization and assessing the performance of the low-temperature crystallization process in the production of CoSO4 hydrates. In addition, some practical examples of cooling crystallization and eutectic freeze crystallization of CoSO4 solutions are provided.

Elemental sulfur (S8) is an abundant and inexpensive by-product of petroleum refining. Polymeric sulfur is thermodynamically unstable and depolymerizes back to S8 with time, which limits its applications and causes megatons of sulfur to accumulate in nature. A novel sulfur-oleylamine copolymer, synthesized using the inverse vulcanization method, is reported for the selective recovery of Cu2+ from a complex mixture of transition metals. Adsorption studies have been performed using batch experiments in the simulated aqueous solution containing a mix of metal ions (Mx+= Fe, Al, Mn, Co, Ni and Cu). The effect of different adsorption parameters such as pH, time, adsorbent dose, sulfur content, and desorption have been studied. The results demonstrate that the sulfur-oleylamine copolymer shows high selectivity towards Cu2+, with excellent adsorption efficiency of >98 % in acidic pH (pH≈1) at room temperature, which is of practical relevance in the handling of battery leach liquors obtained from industrially derived blackmass. Finally, the sulfur-oleylamine copolymers were also applied to battery leach liquors with hydrochloric (HCl) or citric acid and which showed Cu2+ adsorption efficiency of >98 %±1 and > 95 %±7, respectively. This work presents a novel way to convert industrial waste into a stable sulfur polymer and demonstrates its use as a promising material for selective recovery of Cu ions from battery waste and industrial effluents in a simple and cost-effective manner. 

In this study, eutectic freeze crystallization (EFC) was investigated to recover NiSO4 and CoSO4 hydrates from aqueous and dilute sulfuric acid solutions of metal sulfates. Binary phase diagrams were established using a combination of thermodynamic modeling and experimental data. The mixed-solvent electrolyte (MSE) model was employed to model solid–liquid phase equilibria. The predicted binary phase diagrams from the model were in good agreement with the experimental results. Experimental eutectic temperatures and eutectic metal sulfate concentrations for the NiSO4-H2O and CoSO4-H2O systems are −3.3 °C and 20.8 wt% and −2.9 °C and 19.3 wt%, respectively. For NiSO4-H2SO4-H2O and CoSO4-H2SO4-H2O systems, the eutectic temperature and eutectic metal sulfate concentration decrease with increasing H2SO4 concentration. Batch experiments were performed to study the EFC of different sulfate solutions, including 25- wt% NiSO4 in H2O, 20- wt% NiSO4 in 0.5 mol/kg H2SO4, 25- wt% CoSO4 in H2O, and 20- wt% CoSO4 in 0.5 mol/kg H2SO4. The results show that controlling the supersaturation allows high-quality ice and salt crystals to be recovered as separate phases under eutectic conditions, with the crystalline salts in the form of heptahydrates. This study shows that EFC can be a promising alternative to evaporative crystallization for recovering NiSO4 and CoSO4 hydrates from sulfate solutions.

Exploiting redox activity in supramolecular frameworks such as coordination polymers, metal-organic frameworks and related nanostructures is of paramount importance both at the molecular level and for their technological applications, since the modulation of their redox states is an emerging strategy to enhance their physical properties. In the plethora of organic linkers, quinone derivatives are excellent redox-active ligands, widely used for various applications such as electrode materials, flow batteries, pseudocapacitors, etc. Benzoquinones undergo a one-electron reversible reduction to form a semiquinone radical species that can be further reduced to form hydroquinone. Remarkably, the quinoid ring can be functionalized with various functional groups making these systems excellent linkers to construct supramolecular frameworks as well as challenging platforms to tune the redox potential and therefore the stability of radical anions and electrochemical performances of the obtained materials. The recent advances on benzoquinone-based 2D CPs/MOFs and related nanostructures are reported, highlighting the extreme versatility of this class of redox-active linkers in tailoring the physical properties of the obtained materials. The current/future potential of these materials in electrochemical and technologically relevant applications will also be envisioned.

The synthesis, structural and photophysical characterization, and theoretical studies on homo/heteroleptic neutral 2D-layered coordination polymers (CPs), obtained by combining the Er-III in ion with chlorocyananilate (ClCNAn) and/or tetrafluoroterephthalate (F4BDC) linkers, are herein reported. The structure of the heteroleptic Er-III-based CP, formulated as [Er-2(CICNAn)(2)(F4BDC)(DMSO)(6)](n) (1) is also reported. 1 crystallizes in the triclinic P1 space group, and the structure consists of neutral 2D layers formed by Er-III ions linked through the two linkers oriented in such a way that the neighboring 2D layers are eclipsed along the a axis, leading to parallelogram-like cavities. Photophysical measurements highlight the prominent role of chlorocyananilate linkers as optical antennas toward lanthanide ions, while wave-function-theory analysis supports the experimental findings, providing evidence for the effect of ligand substitution on the luminescence properties of homo/heteroleptic 2D CPs.

Multifunctional molecular materials have attracted material scientists for several years as they are promising materials for the future generation of electronic devices. Careful selection of their molecular building blocks allows for the combination and/or even interplay of different physical properties in the same crystal lattice. Incorporation of redox activity in these networks is one of the most appealing and recent synthetic strategies used to enhance magnetic and/or conducting and/or optical properties. Quinone derivatives are excellent redox-active linkers, widely used for various applications such as electrode materials, flow batteries, pseudo-capacitors, etc. Quinones undergo a reversible two-electron redox reaction to form hydroquinone dianions via intermediate semiquinone radical formation. Moreover, the possibility to functionalize the six-membered ring of the quinone by various substituents/functional groups make them excellent molecular building blocks for the construction of multifunctional tunable metal-organic frameworks (MOFs). An overview of the recent advances on benzoquinone-based MOFs, with a particular focus on key examples where magnetic and/or conducting properties are tuned/switched, even simultaneously, by playing with redox activity, is herein envisioned.

An ultrasound-assisted extraction (leaching) method of valuable metals from discarded lithium-ion batteries (LiBs) is reported. Mild organic citric or acetic acids were used as leaching agents for a more environmentally-friendly recovery of the lithium, nickel, cobalt, and manganese from the discharged and crushed lithium nickel-manganese-cobalt oxide (NMC) LiBs. The extraction was performed with the presence/absence of continuous ultrasound (US) energy supplied by a 110 W ultrasonic bath. The effect of temperature (30-70 °C), reducing agent concentration (H2O2: 0-2.0 vol%), as well as choice of specific acid on the metal dissolution were investigated. The US leaching decreased the leaching time by more than 50% and improved the leached percentage of Li, Mn, Co, and Ni due to the local heat and improved mass transfer between solid and liquid interfaces in the process. The X-ray diffraction results of residues from the US leaching further confirmed an improved dissolution of the crushed layered NMC structure, resulting in the significant improvement of the leached amounts of the valuable metals. Furthermore, it is demonstrated that using citric acid eliminated the need of additional reducing agents and suppressed the dissolution of copper (Cu) due to its inhibitor effect on the Cu surface, i.e. compared with using acetic acid as leaching reagent. Overall, it is shown that recovery of the battery metals can be facilitated and carried out in a more energy-efficient manner at low temperatures (50 °C) using ultrasound to improve metal ions mass transportation in the residue layers of the NMC during the organic acid leaching.