Constrained optimization is used to derive human postures and movements. In the first study a static 3D model with 30 muscle groups is used to analyse postures. The activation levels of these muscles are minimized in order to represent the individual's choice of posture. Subject specific data in terms of anthropometry, strength and orthopedic aids serve as input. The aim is to study effects from orthopedic treatment and altered abilities of the subject. Initial validation shows qualitative agreement of posture strategies but further details about passive stiffness and anthropometry are needed, especially to predict pelvis orientation. In the second application, the athletic long jump, a problem formulation is developed to find optimal movements of a multibody system when subjected to contact. The model was based on rigid links, joint actuators and a wobbling mass. The contact to the ground was modelled as a spring-damper system with tuned properties. The movement in the degrees of freedom representing physical joints was described over contact time through two fifth-order polynomials, with a variable transition time, while the motion in the degrees of freedom of contact and wobbling mass was integrated forwards in time, as a consequence. Muscle activation variables were then optimized in order to maximize ballistic flight distance. The optimization determined contact time, end configuration, activation and interaction with the ground from an initial configuration. The results from optimization show a reasonable agreement with experimentally recorded jumps, but individual recordings and measurements are needed for more precise conclusions.

Optimization has been used to simulate human neural control and resulting movement patterns. The short term aim was to develop the methodology required for solving the movement optimization problem often arising when modelling human movements. A long term aim is the contribution to increased knowledge about various human movements, wherein postures is one specific case. Simulation tools can give valuable information to improve orthopeadic treatments and technique for training and performance in sports. In one study a static 3D model with 30 muscle groups was used to analyse postures. The activation levels of these muscles are minimized in order to represent the individual’s choice of posture. Subject specific data in terms of anthropometry, strength and orthopedic aids serve as input. The specific aim of this part was to study effects from orthopedic treatment and altered abilities of the subject. Initial validation shows qualitative agreement of posture strategies but further details about passive stiffness and anthropometry are needed, especially to predict pelvis orientation. Four studies dealt with movement optimization. The main methodological advance was to introduce contact constraints to the movement optimization. A freetime multiple phase formulation was derived to be able to analyse movements where different constraints and degrees of freedom are present in subsequent phases of the movements. The athletic long jump, a two foot high jump, a backward somersault and rowing were used as applications with their different need of formulation. Maximum performance as well as least effort cost functions have been explored. Even though it has been a secondary aim in this work the results show reasonable agreement to expected movements in reality. Case specific subject properties and inclusion of muscle dynamics are required to draw conclusions about improvements in the sport activity, respectively.