Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Depletion of carbon from Al2O3-C mixtures into liquid iron: Rate controlling mechanisms
KTH, Skolan för industriell teknik och management (ITM), Materialvetenskap, Materialens processvetenskap.
2007 (engelsk)Inngår i: Canadian metallurgical quarterly, ISSN 0008-4433, E-ISSN 1879-1395, Vol. 46, nr 1, s. 25-32Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A sessile drop investigation on the kinetics of carbon dissolution from an alumina-carbon composite (75% C, 25% alumina) and a commercial refractory (28.3% C, 66.67% alumina, 5% binder) into liquid iron at 1600 degrees C is reported. Carbon dissolution from refractory substrates was very slow reaching 0.84% C and 0.1% C, respectively after 60 minutes. Both substrates also showed poor wettability. Experimental studies were supplemented with atomistic Monte Carlo simulations to investigate the influence of composition, temperature and melt turbulence. High carbon systems (100% C and 75% C, balance alumina) were affected by both temperature and melt turbulence to some extent; increased levels of melt turbulence/higher temperatures had no influence on low carbon (30% C) system. While mass transfer was the dominant rate controlling mechanism for high carbon systems, poor wettability of alumina with liquid iron and its significant influence on inhibiting the penetration of liquid iron in the refractory matrix was found to be the dominant rate controlling factor for low carbon refractories.

sted, utgiver, år, opplag, sider
2007. Vol. 46, nr 1, s. 25-32
Emneord [en]
monte-carlo-simulation, c-s melts, graphite, dissolution, sulfur
Identifikatorer
URN: urn:nbn:se:kth:diva-16413ISI: 000244511400004Scopus ID: 2-s2.0-33847194633OAI: oai:DiVA.org:kth-16413DiVA, id: diva2:334455
Merknad
QC 20100525Tilgjengelig fra: 2010-08-05 Laget: 2010-08-05 Sist oppdatert: 2017-12-12bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Scopus

Søk i DiVA

Av forfatter/redaktør
Seetharaman, Seshadri
Av organisasjonen
I samme tidsskrift
Canadian metallurgical quarterly

Søk utenfor DiVA

GoogleGoogle Scholar

urn-nbn

Altmetric

urn-nbn
Totalt: 41 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf