Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Survey of dust formed in the TEXTOR tokamak: structure and fuel retention
KTH, Skolan för elektro- och systemteknik (EES), Fusionsplasmafysik.
KTH, Skolan för elektro- och systemteknik (EES), Fusionsplasmafysik.ORCID-id: 0000-0001-9901-6296
Institute for Energy Research, Forschungszentrum Jülich, Association EURATOM-FZJ, Germany.
Institute for Energy Research, Forschungszentrum Jülich, Association EURATOM-FZJ, Germany.
Vise andre og tillknytning
2009 (engelsk)Inngår i: Physica scripta. T, ISSN 0281-1847, Vol. T138, s. 014025-Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A detailed survey of erosion and deposition on plasma-facing components was performed in the TEXTOR tokamak. Co-deposits and dust particles were collected from graphite limiters and from several locations on the Inconel liner. The total amount of dust (loose material), originating mainly from carbon-rich co-deposits detached from the limiters and the liner, was around 2 g, with sizes from 0.1 mu m to 1 mm. The morphology and fuel retention was determined using microscopy methods, ion beam analysis and thermal desorption spectrometry. The study revealed differences in structure and fuel content between deposits from the toroidal and main poloidal limiters. There were also splashes, up to 1 mm in diameter, of molten metal (mainly nickel) on the toroidal limiters. Issues of the dust conversion factor (erosion-to-dust) are addressed and a comparison with results of previous dust surveys at TEXTOR is also briefly presented.

sted, utgiver, år, opplag, sider
Institute of Physics Publishing (IOPP), 2009. Vol. T138, s. 014025-
Emneord [en]
CONTROLLED FUSION DEVICES, CO-DEPOSITED LAYERS, PLASMA-FACING COMPONENTS, HIGH HEAT-FLUX, CARBON, PARTICLES, EROSION, ITER, CONSEQUENCES, EMISSION
HSV kategori
Identifikatorer
URN: urn:nbn:se:kth:diva-25575DOI: 10.1088/0031-8949/2009/T138/014025ISI: 000273199200026Scopus ID: 2-s2.0-77953881798OAI: oai:DiVA.org:kth-25575DiVA, id: diva2:371160
Konferanse
12th International Workshop on Plasma-Facing Materials and Components for Fusion Applications Julich, GERMANY, MAY, 2009
Merknad

QC 20101119

Tilgjengelig fra: 2012-01-26 Laget: 2010-10-27 Sist oppdatert: 2017-12-12bibliografisk kontrollert
Inngår i avhandling
1. Fuel retention and fuel removal from first wall components in tokamaks
Åpne denne publikasjonen i ny fane eller vindu >>Fuel retention and fuel removal from first wall components in tokamaks
2011 (engelsk)Licentiatavhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Fuel inventory and generation of carbon and metal dust in a tokamak are perceived to be serious safety and economy issues for a steady-state operation of a fusion reactor, e.g. ITER. These topics have been explored in the on-going Ph.D. work in order to contribute to the better understanding and development of methods for controlling and curtailing fuel accumulation and dust formation in controlled fusion devices. The work was carried out with material facing fusion plasmas in three tokamaks: TEXTOR in Forschungszentrum Jülich (Germany), Tore Supra in Cadarache (France) and JET in Culham Centre for Fusion Energy (United Kingdom).

 This thesis provides an account on studies of fuel removal techniques from plasmafacing components (PFCs) and on consequences of dust formation. Following issues are addressed: (a)  properties of carbon and metal dust formed in the TEXTOR tokamak;  (b)  dust generation associated with removal of fuel and co-deposited layers from carbon PFCs from TEXTOR and Tore Supra;  (c)  surface morphology of wall components after different cleaning treatments;  (d)  surface properties of diagnostic mirrors tested at JET for ITER. The study dealt with carbon, tungsten and beryllium, i.e. with the three major elements being used for PFC in present-day devices and foreseen for a next-step machine.

 Some essential results are summarised by the following.

 (i)  The amount of loose dust found on the floor of the TEXTOR liner does not exceed 2 grams with particle size range 0.1 mm – 1 mm. The presence of fine (up to 1 mm) crystalline graphite in the collected matter suggests that brittle destruction of carbon PFC could take place during off-normal events. Carbon is the main component, but there are also magnetic and non-magnetic metal agglomerates. The results obtained strongly indicate that in a carbon wall machine the disintegration of flaking co-deposits on PFC is the main source of dust:  (ii)  The fuel content in dust and co-deposits varies from 10% on the main limiters to 0.03% on the neutralizer plates as determined by thermal desorption and ionbeam methods:  (iii)  Fuel removal by annealing in vacuum or by oxidative methods disintegrates codeposits. In the case of thick layers, the treatment makes them brittle thus reducing the adherence to the target and, as a consequence, this leads to the formation of dust:  (iv)   Application of thermal methods for fuel removal from carbon-rich layers is effective only at high temperatures (above 800 K), i.e. in the range exceeding the allowed baking temperature of the ITER divertor:  (v)   Photonic cleaning by laser pulses effectively removes fuel-rich deposited layers, but it also produces debris, especially under ablation conditions:  (vi)  Photonic cleaning of mirrors exposed in JET results in partial recovery of reflectivity, but surfaces are modified by laser pulses.

The presentation of results is accompanied by a discussion of their consequences for the future development and the application of fuel and dust removal methods in a next-step fusion device.

sted, utgiver, år, opplag, sider
Stockholm: KTH, 2011. s. ix, 40
Serie
Trita-EE, ISSN 1653-5146 ; 2011:011
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-29588 (URN)978-91-7415-867-0 (ISBN)
Merknad
QC 20110209Tilgjengelig fra: 2011-02-09 Laget: 2011-02-09 Sist oppdatert: 2011-03-10bibliografisk kontrollert
2. Plasma-Facing Components in Tokamaks: Material Modification and Fuel Retention
Åpne denne publikasjonen i ny fane eller vindu >>Plasma-Facing Components in Tokamaks: Material Modification and Fuel Retention
2012 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Fuel inventory and generation of carbon and metal dust in a tokamak are perceived to be serious safety and economy issues for the steady-state operation of a fusion reactor, e.g. ITER. These topics have been explored in this thesis in order to contribute to a better understanding and the development of methods for controlling and curtailing fuel accumulation and dust formation in controlled fusion devices. The work was carried out with material facing fusion plasmas in three tokamaks: TEXTOR in Forschungszentrum Jülich (Germany), Tore Supra in the Nuclear Research Center Cadarache (France) and JET in Culham Centre for Fusion Energy (United Kingdom). Following issues were addressed: (a) properties of material migration products, i.e. co-deposited layers and dust particles; (b) impact of fuel removal methods on dust generation and on modification of plasma-facing components; (c) efficiency of fuel and deposit removal techniques; (d) degradation mechanism of diagnostic components - mirrors - and methods of their regeneration.

sted, utgiver, år, opplag, sider
Stockholm: KTH Royal Institute of Technology, 2012. s. xiv, 58
Serie
Trita-EE, ISSN 1653-5146 ; 2012:058
Emneord
magnetic confinement fusion, plasma-facing components, plasma-facing materials, fuel inventory, erosion and deposition
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-105099 (URN)978-91-7501-567-5 (ISBN)
Disputas
2012-12-12, F3, Lindstedtsvagen 26, KTH, Stockholm, 10:00 (engelsk)
Opponent
Veileder
Merknad

QC 20121116

Tilgjengelig fra: 2012-11-16 Laget: 2012-11-16 Sist oppdatert: 2012-11-16bibliografisk kontrollert

Open Access i DiVA

fulltext(1799 kB)270 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 1799 kBChecksum SHA-512
a1fb6b97313fa583e767b82d986bb586b2726f2e1ea1ab3d70c711edbe1c0a79999809140c102d6d3b6a3ac6cc23b58a495cbfd87fde0c82fa78f778a9f51eda
Type fulltextMimetype application/pdf

Andre lenker

Forlagets fulltekstScopusPhysica scripta

Personposter BETA

Rubel, Marek J.

Søk i DiVA

Av forfatter/redaktør
Ivanova, DaryaRubel, Marek J.Huang, Z.Sundelin, Per
Av organisasjonen
I samme tidsskrift
Physica scripta. T

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 270 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 166 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf