Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
From Responsive Interfaces to Honeycomb Membranes by Controlled Radical Polymerisation
KTH, Skolan för kemivetenskap (CHE), Fiber- och polymerteknik.
2008 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

In this study, surface modification of both organic and inorganic substrates (in terms of cellulose and silica nanoparticles, respectively) has been explored using surface-initiated atom transfer radical polymerisation (ATRP).

The desire to modify bio-based materials to fit into new application areas and the need for bio-based materials with improved material properties is steadily increasing due to environmental concern.

Superhydrophobic and self-cleaning cellulose surfaces were fabricated by combining ATRP with post-functionalisation. Glycidyl methacrylate was grafted from filter paper, and the epoxide groups were used as reactive handles to create a branched “graft-on-graft” architecture. Post-functionalisation of this architecture with perfluorinated chains or alkyl chains resulted in the formation of superhydrophobic surfaces.

Grafting of N-isopropylacrylamide (NIPAAm) from filter paper yielded cellulose surfaces capable of switching the wettability, from hydrophilic to hydrophobic, in response to changes in temperature. The wettability of cellulose surfaces grafted with poly(4-vinylpyridine) (P4VP) could be adjusted from hydrophilic to hydrophobic by changing pH. Furthermore, cellulose surfaces responding to changes in both pH and temperature were obtained via grafting of block copolymers of PNIPAAm and P4VP.

The use of inorganic nano-particles in composites has attracted considerable academic and industrial interest due to their excellent mechanical and thermal properties. Styrene was grafted from the surface of silica nanoparticles using ATRP. The resulting organic-inorganic hybrid materials did not aggregate to the same extent as the un-modified silica particles.

The polystyrene-modified silica particles were used for the fabrication of honeycomb membranes. It was evident that the pore sizes and the number of porous layers could be tuned by varying the conditions used for film casting. To broaden the range of polymers available for film casting into honeycomb membranes, a block copolymer of polystyrene and poly(methyl methacrylate) was grafted from silica nanoparticles. Polymer-blends of polystyrene-modified particles and poly(9,9´-dihexylfluorene) (PDHF) were also used as an alternative to incorporate functionality into honeycomb membranes.

Ort, förlag, år, upplaga, sidor
Stockholm: KTH , 2008. , s. 67
Serie
Trita-CHE-Report, ISSN 1654-1081 ; 2008:37
Nyckelord [en]
Isoporous membranes, Silica nanoparticles, ATRP, Functional surfaces, cellulose
Nationell ämneskategori
Polymerkemi
Identifikatorer
URN: urn:nbn:se:kth:diva-4733ISBN: 978-91-7178-982-2 (tryckt)OAI: oai:DiVA.org:kth-4733DiVA, id: diva2:13679
Disputation
2008-05-29, F3, Lindstedtväg 26, Stockholm, 10:00
Opponent
Handledare
Anmärkning
QC 20100901Tillgänglig från: 2008-05-08 Skapad: 2008-05-08 Senast uppdaterad: 2010-09-01Bibliografiskt granskad
Delarbeten
1. Superhydrophobic Bio-fibre Surfaces via Tailored Grafting Architecture
Öppna denna publikation i ny flik eller fönster >>Superhydrophobic Bio-fibre Surfaces via Tailored Grafting Architecture
Visa övriga...
2006 (Engelska)Ingår i: Chemical Communications, ISSN 1359-7345, E-ISSN 1364-548X, nr 34, s. 3594-3596Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Superhydrophobic bio-fibre surfaces with a micro-nano-binary surface structure have been achieved via the surface-confined grafting of glycidyl methacrylate, using a branched "graft-on-graft'' architecture, followed by post-functionalisation to obtain fluorinated brushes.

Nyckelord
glycidylmethacrylate; methacrylic acid derivative; unclassified drug; article; chemical analysis; chemical structure; fiber; fluorination; hydrophobicity; nanotechnology; surface property; Cellulose; Fluorocarbon Polymers; Hydrophobicity; Molecular Structure; Polymethacrylic Acids; Surface Properties
Nationell ämneskategori
Polymerkemi
Identifikatorer
urn:nbn:se:kth:diva-8369 (URN)10.1039/b607411a (DOI)000239937600006 ()17047775 (PubMedID)2-s2.0-33747616433 (Scopus ID)
Anmärkning
QC 20100805Tillgänglig från: 2008-05-08 Skapad: 2008-05-08 Senast uppdaterad: 2020-03-09Bibliografiskt granskad
2. Bouncing Water Droplets on Superhydrophobic Cellulose Surfaces
Öppna denna publikation i ny flik eller fönster >>Bouncing Water Droplets on Superhydrophobic Cellulose Surfaces
Visa övriga...
(Engelska)Ingår i: Journal of Materials Chemistry, ISSN 0959-9428, E-ISSN 1364-5501Artikel i tidskrift (Övrigt vetenskapligt) Submitted
Nationell ämneskategori
Polymerkemi
Identifikatorer
urn:nbn:se:kth:diva-8370 (URN)
Anmärkning
QC 20100901Tillgänglig från: 2008-05-08 Skapad: 2008-05-08 Senast uppdaterad: 2017-12-14Bibliografiskt granskad
3. Intelligent Dual-Responsive Cellulose Surfaces via Surface-Initiated ATRP
Öppna denna publikation i ny flik eller fönster >>Intelligent Dual-Responsive Cellulose Surfaces via Surface-Initiated ATRP
Visa övriga...
2008 (Engelska)Ingår i: Biomacromolecules, ISSN 1525-7797, E-ISSN 1526-4602, Vol. 9, nr 8, s. 2139-2145Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Novel thermo-responsive cellulose (filter paper) surfaces of N-isopropylacrylamide (NIPAAm) and pH-responsive cellulose surfaces of 4-vinylpyridine (4VP) have been achieved via surface-initiated ATRP. Dual-responsive (pH and temperature) cellulose surfaces were also obtained through the synthesis of block-copolymer brushes of PNIPAAm and P4VP. With changes in pH and temperature, these "intelligent" surfaces showed a reversible response to both individual triggers, as indicated by the changes in wettability from highly hydrophilic to highly hydrophobic observed by water contact angle measurements. Adjusting the composition of the grafted block-copolymer brushes allowed for further tuning of the wettability of these "intelligent" cellulose surfaces.

Nyckelord
Acrylic monomers; Amides; Angle measurement; Atom transfer radical polymerization; Brushes; Cellulose; Contact angle; Copolymerization; Nanostructured materials; Plastic products; Polymers; 4-vinylpyridine; Block co polymers; Cellulose surfaces; Filter papers; N-Isopropylacrylamide; pH-responsive; PNIPAAm; Surface-initiated ATRP; Water contact angle; Acrylamides; Acrylic Resins; Biocompatible Materials; Cellulose; Copper; Filtration; Hydrogen-Ion Concentration; Hydrolysis; Polymers; Pyridines; Spectrophotometry, Infrared; Spectroscopy, Fourier Transform Infrared; Surface Properties; Temperature; Wettability
Nationell ämneskategori
Polymerkemi
Identifikatorer
urn:nbn:se:kth:diva-8371 (URN)10.1021/bm800193n (DOI)000258400200008 ()18636775 (PubMedID)2-s2.0-52649118631 (Scopus ID)
Anmärkning
QC 20100805. Uppdaterad från In press till Published 20100805.Tillgänglig från: 2008-05-08 Skapad: 2008-05-08 Senast uppdaterad: 2017-12-14Bibliografiskt granskad
4. Highly-ordered hybrid organic-inorganic isoporous membranes from polymer modified nanoparticles
Öppna denna publikation i ny flik eller fönster >>Highly-ordered hybrid organic-inorganic isoporous membranes from polymer modified nanoparticles
Visa övriga...
2005 (Engelska)Ingår i: Macromolecular rapid communications, ISSN 1022-1336, E-ISSN 1521-3927, Vol. 26, nr 7, s. 524-528Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Organic-inorganic hybrid materials consisting of nanosized silica particles with surface grafted PS or PS-b-PMMA were synthesized using ATRP. These hybrid materials were used in the fabrication of highly-ordered isoporous membranes. Optical characterization revealed that the membranes consisted of hexagonally ordered pores of uniform size. The combination of an open pore structure and high surface area makes isoporous membranes into materials of high interest in fields as biotechnology and photonics.

Nyckelord
atomic force microscopy (AFM), atom transfer radical polymerization (ATRP), block copolymers, self-assembly, silica nanoparticles
Nationell ämneskategori
Polymerkemi
Identifikatorer
urn:nbn:se:kth:diva-8372 (URN)10.1002/marc.200400617 (DOI)000228436600004 ()2-s2.0-20444470076 (Scopus ID)
Anmärkning
QC 20100901Tillgänglig från: 2008-05-08 Skapad: 2008-05-08 Senast uppdaterad: 2017-12-14Bibliografiskt granskad
5. Self-assembly of poly(9,9 '-dihexylfluorene) to form highly ordered isoporous films via blending
Öppna denna publikation i ny flik eller fönster >>Self-assembly of poly(9,9 '-dihexylfluorene) to form highly ordered isoporous films via blending
Visa övriga...
2006 (Engelska)Ingår i: Langmuir, ISSN 0743-7463, E-ISSN 1520-5827, Vol. 22, nr 9, s. 3959-3961Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Highly ordered hexagonal arrays of isoporous films prepared from poly(9,9'-dihexylfluorene) and polystyrene-grafted silica nanoparticles (Si-graft-PS) are presented. These close-packed arrays were formed in areas of many square millimeters. The pore size varied from 3.6 to 8.5 mu m, depending on the concentration of Si-graft-PS and the processing conditions. Solid-state photoluminescence resulted in a significant red shift of up to 30 nm in these films compared to that in conventional processing techniques. These differences are attributed to enhanced aggregation of the polymers caused by polymer-solvent interactions. These highly ordered polymer films may find use in microelectronic and biological and/or chemical sensor applications.

Nyckelord
Biosensors, Blending, Chemical sensors, Grafting (chemical), Nanostructured materials, Photoluminescence, Polystyrenes, Self assembly, Silica, Polymer films, Polymer-solvent interactions
Nationell ämneskategori
Polymerkemi
Identifikatorer
urn:nbn:se:kth:diva-8373 (URN)10.1021/la053025q (DOI)000236989300003 ()2-s2.0-33646442760 (Scopus ID)
Anmärkning
QC 20100901Tillgänglig från: 2008-05-08 Skapad: 2008-05-08 Senast uppdaterad: 2017-12-14Bibliografiskt granskad
6. Honeycomb Patterned Membranes from Polymer Modified Silica Nanoparticles
Öppna denna publikation i ny flik eller fönster >>Honeycomb Patterned Membranes from Polymer Modified Silica Nanoparticles
Visa övriga...
(Engelska)Manuskript (Övrigt vetenskapligt)
Nyckelord
AFM, SEM, ATRP, honeycomb membranes, self-assembly, silica nanoparticles
Nationell ämneskategori
Polymerkemi
Identifikatorer
urn:nbn:se:kth:diva-8374 (URN)
Anmärkning
QC 20100901Tillgänglig från: 2008-05-08 Skapad: 2008-05-08 Senast uppdaterad: 2010-09-01Bibliografiskt granskad

Open Access i DiVA

fulltext(11367 kB)699 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 11367 kBChecksumma MD5
e91c2b46ad4a7ee7a6f06780e83b9f4d90c6ed264146e7aa98af04b9b84f29288c2f24a7
Typ fulltextMimetyp application/pdf

Sök vidare i DiVA

Av författaren/redaktören
Nyström, Daniel
Av organisationen
Fiber- och polymerteknik
Polymerkemi

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 699 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 684 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf