Non-catalytic and catalytic pyrolysis of two waste electrical and electronic equipment (WEEE) fractions, with two different copper contents (low-and medium-grade WEEE named as LGE and MGE, respectively), were performed using micro-and lab-scale pyrolyzers. This research aimed to fundamentally study the feasibility of chemical recycling of the WEEE fractions via pyrolysis process considering molecular interactions at the interfaces of catalyst active sites and WEEE pyrolyzates which significantly influence the chemical functionality of surface intermediates and catalysis by reorganizing the pyrolyzates near catalytic active sites forming reactive surface intermediates. Hence, Al2O3, TiO2, HBeta, HZSM-5 and spent FCC catalysts were used in in-situ micro-scale pyrolysis. Results indicated that HBeta and HZSM-5 zeolites were more suitable than other catalysts for selective production of aromatic hydrocarbons and BTX. High acidity and shape selectivity of zeotype surfaces make them attractive frameworks for catalytic pyrolysis processes aiming for light hydrocarbons like BTX. Meanwhile, the ex-situ pyrolysis of LGE and MGE were carried out using HZSM-5 in micro-and lab-scale pyrolyzers to investigate the effect of pyrolysis configuration on the BTX selectivity. Although the ex-situ pyrolysis resulted in higher formation of BTX from LGE, the in-situ configuration was more efficient to produce BTX from MGE.