Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Aeroacoustics Studies of Duct Branches with Application to Silencers
KTH, Skolan för teknikvetenskap (SCI), Farkost och flyg, MWL Strömningsakustik.
2010 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

New methodologies and concepts for developing compact and energy efficient automotive exhaust systems have been studied. This originates in the growing concern for global warming, to which road transportation is a major contributor. The focus has been on commercial vehicles—most often powered by diesel engines—for which the emission legislation has been dramatically increased over the last decade. The emissions of particulates and nitrogen oxides have been successfully reduced by the introduction of filters and catalytic converters, but the fuel consumption, which basically determines the emissions of carbon dioxides, has not been improved accordingly. The potential reduction of fuel consumption by optimising the exhaust after-treatment system (assuming fixed after-treatment components) of a typical heavy-duty commercial vehicle is ~4%, which would have a significant impact on both the environment and the overall economy of the vehicle.

First, methodologies to efficiently model complex flow duct networks such as exhaust systems are investigated. The well-established linear multiport approach is extended to include flow-acoustic interaction effects. This introduces an effective way of quantifying amplification and attenuation of incident sound, and, perhaps more importantly, the possibility of predicting nonlinear phenomena such as self-sustained oscillations—whistling—using linear models. The methodology is demonstrated on T-junctions, which is a configuration well known to be prone to self-sustained oscillations for grazing flow past the side branch orifice. It is shown, and validated experimentally, that the existence and frequency of self-sustained oscillations can be predicted using linear theory.

Further, the aeroacoustics of T-junctions are studied. A test rig for the full determination of the scattering matrix defining the linear three-port representing the T-junction is developed, allowing for any combination of grazing-bias flow. It is shown that the constructive flow-acoustic coupling not only varies with the flow configuration but also with the incidence of the acoustic disturbance. Configurations where flow from the side branch joins the grazing flow are still prone to whistling, while flow bleeding off from the main branch effectively cancels any constructive flow-acoustic coupling.

Two silencer concepts are evaluated: first the classic Herschel-Quincke tube and second a novel modified flow reversal silencer. The Herschel-Quincke tube is capable of providing effective attenuation with very low pressure loss penalty. The attenuation conditions are derived and their sensitivity to mean flow explained. Two implementations have been modelled using the multiport methodology and then validated experimentally. The first configuration, where the nodal points are composed of T-junctions, proves to be an example where internal reflections in the system can provide sufficient feedback for self-sustained oscillation. Again, this is predicted accurately by the linear theory. The second implementation, with nodal points made from Y-junctions, was designed to allow for equal flow distribution between the two parallel ducts, thus allowing for the demonstration of the passive properties of the system. Experimental results presented for these two configurations correlate well with the derived theory.

The second silencer concept studied consists of a flow reversal chamber that is converted to a resonator by acoustically short-circuiting the inlet and outlet ducts. The eigenfrequency of the resonator is easily shifted by varying the geometry of the short circuit, thus making the proposed concept ideal for implementation as a semi-active device. Again the concept is modelled using the multiport approach and validated experimentally. It is shown to provide significant attenuation over a wide frequency range with a very compact design, while adding little or no pressure loss to the system.

Ort, förlag, år, upplaga, sidor
Stockholm: KTH , 2010. , s. xi, 50
Serie
Trita-AVE, ISSN 1651-7660 ; 10:74
Nyckelord [en]
silencer, muffler, confined flows, flow duct, aeroacoustics, vortex sound, acoustic multiports, linear stability, self-sustained oscillations, whistling, Herschel-Quincke tube, acoustic resonator
Nationell ämneskategori
Strömningsmekanik och akustik
Identifikatorer
URN: urn:nbn:se:kth:diva-29568ISBN: 978-91-7415-842-7 (tryckt)OAI: oai:DiVA.org:kth-29568DiVA, id: diva2:395954
Disputation
2011-02-10, Sal F3, Lindstedtsvägen 26, KTH, Stockholm, 13:15 (Engelska)
Opponent
Handledare
Anmärkning
QC 20110208Tillgänglig från: 2011-02-08 Skapad: 2011-02-08 Senast uppdaterad: 2011-02-08Bibliografiskt granskad
Delarbeten
1. Aeroacoustics of T-junctions: An experimental investigation
Öppna denna publikation i ny flik eller fönster >>Aeroacoustics of T-junctions: An experimental investigation
2010 (Engelska)Ingår i: Journal of Sound and Vibration, ISSN 0022-460X, E-ISSN 1095-8568, Vol. 329, nr 10, s. 1793-1808Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

An experimental method for determining the aeroacoustic properties of side branch orifices allowing for any combination of grazing and bias flow is presented. The geometry studied, a T-junction, is treated as an active acoustic three-port. The passive properties, describing the reflection and transmission of an incident acoustic wave, are described by a system matrix while the active properties are described by a source vector. Expressions for the acoustic impedance under various mean flow and acoustic incidence configurations are developed. In addition, methods for identifying regions where the system can generate sound, by studying only the passive properties, are discussed. A self-sustained oscillation is triggered at one of the identified regions by coupling a resonant system to the three-port.

Nyckelord
GRAZING MEAN FLOW, ACOUSTIC-IMPEDANCE, PERFORATED PLATES, CIRCULAR ORIFICE, BOUNDARY-LAYER, FLUID MACHINES, PIPE, SYSTEMS, DUCT, POTENTIALITY
Nationell ämneskategori
Strömningsmekanik och akustik
Identifikatorer
urn:nbn:se:kth:diva-28712 (URN)10.1016/j.jsv.2009.11.024 (DOI)000274926800012 ()2-s2.0-77954372075 (Scopus ID)
Anmärkning
QC 20110121Tillgänglig från: 2011-01-21 Skapad: 2011-01-19 Senast uppdaterad: 2017-12-11Bibliografiskt granskad
2. Quasisteady model of the acoustic scattering of a T- Junction
Öppna denna publikation i ny flik eller fönster >>Quasisteady model of the acoustic scattering of a T- Junction
2011 (Engelska)Ingår i: Journal of Sound and Vibration, ISSN 0022-460X, E-ISSN 1095-8568, Vol. 330, nr 21, s. 5131-5137Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

T-junctions are common elements in flow duct networks. It is shown that for low Strouhal numbers, based on the duct diameter, their acoustic scattering properties can be described using an incompressible quasi-steady model. Models are derived for systems subjected to combinations of grazing and bias mean flow, and are shown to work in both the limiting cases that is, grazing or bias flow alone as well as for the joining or dividing flow configurations. The upper Strouhal number for which the quasi-steady models are applicable is limited by flow-acoustic interaction effects, which differ significantly between the different flow configurations. Generally the models are applicable up to Strouhal numbers of approximately 0.1-0.2, which is comparable with previous published models for other configurations such as bends and orifices. This range is sufficient to make the model useful in many important engineering applications.

Nyckelord
aeroacoustic response, duct
Nationell ämneskategori
Strömningsmekanik och akustik
Identifikatorer
urn:nbn:se:kth:diva-29567 (URN)10.1016/j.jsv.2011.05.012 (DOI)000293725500012 ()2-s2.0-79960555852 (Scopus ID)
Forskningsfinansiär
TrenOp, Transport Research Environment with Novel Perspectives
Anmärkning
QC 20110208. Updated from submitted to published 20120327Tillgänglig från: 2011-02-08 Skapad: 2011-02-08 Senast uppdaterad: 2017-12-11Bibliografiskt granskad
3. On the Use of Linear Acoustic Multiports to Predict Whistling in Confined Flows
Öppna denna publikation i ny flik eller fönster >>On the Use of Linear Acoustic Multiports to Predict Whistling in Confined Flows
2011 (Engelska)Ingår i: Acta Acoustica united with Acustica, ISSN 1610-1928, E-ISSN 1861-9959, Vol. 97, nr 1, s. 24-33Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The use of linear acoustic multiport models to analyse the existence of flow driven instabilities, that is - self-sustained oscillators or whistles - is addressed. By combining the scattering and reflection matrices for a system and searching for eigenfrequencies (zeros) in the critical half-plane, the existence of exponentially growing instabilities can be determined. In practice, the available frequency domain data are only known along the real axis; then the search for zeros may be done via the so-called Nyquist stability criterion generalized to an N-degree of freedom system. The method has been validated by two test cases, a T-junction and a Herschel-Quincke tube. In both cases, the occurrence and the frequencies of the self-sustained oscillations were correctly predicted.

Nationell ämneskategori
Strömningsmekanik och akustik
Identifikatorer
urn:nbn:se:kth:diva-29564 (URN)10.3813/AAA.918383 (DOI)000286113700004 ()2-s2.0-78651483482 (Scopus ID)
Forskningsfinansiär
TrenOp, Transport Research Environment with Novel Perspectives
Anmärkning
QC 20110208Tillgänglig från: 2011-02-08 Skapad: 2011-02-08 Senast uppdaterad: 2017-12-11Bibliografiskt granskad
4. The Herschel-Quincke tube: The attenuation conditions and their sensitivity to mean flow
Öppna denna publikation i ny flik eller fönster >>The Herschel-Quincke tube: The attenuation conditions and their sensitivity to mean flow
2008 (Engelska)Ingår i: Journal of the Acoustical Society of America, ISSN 0001-4966, E-ISSN 1520-8524, Vol. 124, nr 2, s. 723-732Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The classic Herschel-Quincke tube is a parallel connection of two ducts yielding multiple noise attenuation maxima via destructive interference. This problem has been discussed to different degrees by a number of authors over the years. This study returns to the basics of the system for the purpose of furthering the understanding of the conditions necessary for noise attenuation and especially their sensitivity to mean flow. First, the transmission loss for an N-duct system with mean flow and arbitrary conditions of state in the different ducts is derived. Next, the two types of conditions yielding the attenuation maxima are studied. In addition to a discussion of the underlying physics, generic expressions for frequencies at which maximum attenuation occur are presented. Experiments without mean flow generally show good agreement with theory based on straight duct elements. However, more detailed models may be required for accurate simulations in the presence of mean flow. A simple model compensating for the losses associated with bends is shown to improve the results significantly for the geometry studied.

Ort, förlag, år, upplaga, sidor
American Institute of Physics (AIP), 2008
Nyckelord
ACOUSTIC PERFORMANCE, PIPE, TRANSMISSION
Nationell ämneskategori
Strömningsmekanik och akustik Strömningsmekanik och akustik
Identifikatorer
urn:nbn:se:kth:diva-29565 (URN)10.1121/1.2940580 (DOI)000258230500014 ()18681565 (PubMedID)2-s2.0-49249123013 (Scopus ID)
Anmärkning

QC 20110208. QC 20160129

Tillgänglig från: 2011-02-08 Skapad: 2011-02-08 Senast uppdaterad: 2020-03-09Bibliografiskt granskad
5. The flow reversal resonator: basic concept and influence of mean flow
Öppna denna publikation i ny flik eller fönster >>The flow reversal resonator: basic concept and influence of mean flow
2007 (Engelska)Ingår i: SAE technical paper series, ISSN 0148-7191Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The flow reversal chamber is a commonly used element in practical silencer design. To lower its fundamental eigenfrequency, it is suggested to acoustically short circuit the inlet and outlet duct. In the low frequency limit such a configuration will correspond to a Helmholtz resonator, but with a choked flow through the short circuit, the main flow will be forced through the expansion volume. For the proposed concept, the flow reversal resonator, a theoretical model is derived and presented together with transfer matrix simulations. The possible extension to a semi active device as well as the influence of mean flow on the system is investigated experimentally. Finally the concept is implemented on a truck silencer. The results indicate that the flow reversal resonator would prove an interesting complement to traditional side branch resonators. The attenuation bandwidth is broader and it can be packaged very efficiently. Mean flow effects are still an issue and should be studied further.

Nationell ämneskategori
Strömningsmekanik och akustik
Identifikatorer
urn:nbn:se:kth:diva-29566 (URN)10.4271/2007-01-2203 (DOI)2-s2.0-84877440385 (Scopus ID)
Anmärkning

QC 20110208

Tillgänglig från: 2011-02-08 Skapad: 2011-02-08 Senast uppdaterad: 2017-12-11Bibliografiskt granskad

Open Access i DiVA

fulltext(1522 kB)2138 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 1522 kBChecksumma SHA-512
24959d1492c5c5c0d42e8d81b6bf7d0b6a28f84432e821cf3fb2d8ab79f6cbc3ec2e535348a5071f6c3f6413892424789bb73af7ea1b4f0462dc5d2af21e7c7a
Typ fulltextMimetyp application/pdf
errata(19 kB)95 nedladdningar
Filinformation
Filnamn ERRATA01.pdfFilstorlek 19 kBChecksumma SHA-512
4ebb1d72982d0d6a8057dccf3e61a3f0d4c27dc00f10ad39369a07a84d5ba900824f454a001ee49d1a6c47266a57ce3158d9adb5e3f0fe61dd08a75bf158e195
Typ errataMimetyp application/pdf

Sök vidare i DiVA

Av författaren/redaktören
Karlsson, Mikael
Av organisationen
MWL Strömningsakustik
Strömningsmekanik och akustik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 2138 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 909 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf