The influence of pad facing material on hydrodynamic lubrication in tilting-pad thrust bearings is investigated in terms of pad and oil-film temperatures and thicknesses. Two tilting-pad thrust bearings are examined: one with babbitt pad facing, the other with a layer of PTFE-based composite material. Frictional torque, pad, collar, and oil-film temperatures and thicknesses are all monitored by means of a comprehensive array of sensors mounted in the bearing and shaft. A considerably smaller range of temperature is seen in the steel backing immediately below the surface material for the PTFE faced pads. Oil-film temperatures measured at the mid-point on the pad trailing edge show no significant difference between the two bearings. Oil-film thicknesses in the two bearings are seen to differ. At the leading edge, oil-film thickness is thinner for the PTFE pad than for babbitt. However, at the trailing edge the PTFE pad has the thicker film.