kth.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Microstructural characterization and formation of α' martensite phase in Ti-6Al-4V alloy butt joints produced by friction stir and gas tungsten arc welding processes
KTH, Skolan för industriell teknik och management (ITM), Materialvetenskap.
2013 (Engelska)Ingår i: Materials and Design, ISSN 0261-3069, Vol. 47, s. 143-150Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The obtained microstructures of a Ti-6Al-4V alloy welded by Gas Tungsten Arc Welding (GTAW) and Friction Stir Welding (FSW) were investigated and evaluated quantitatively. In the GTAW method, the effect of current was examined so that the samples were subjected to various currents between 90 and 120. A. In the FSW process, samples were welded by different rotational speeds (450-850. rpm). Non-destructive tests including Visual and Radiography Tests (VT and RT) were used to identify defect-free samples. The microstructural studies by electron microscopes revealed formation of different phases in the weld area of the samples welded via mentioned methods. The recorded peak temperatures in the weld regions compared favorably with the expectations about the evolved microstructures. A bi-modal microstructure was just obtained in the FSWed sample with a peak temperature below β transus temperature (T<995°C). α' martensite phase, which is an acicular and strengthening phase in this alloy, was only observed in FSWed specimens.

Ort, förlag, år, upplaga, sidor
2013. Vol. 47, s. 143-150
Nyckelord [en]
α' Martensite phase, Friction stir welding, Gas tungsten arc welding, Titanium alloys
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:kth:diva-118280DOI: 10.1016/j.matdes.2012.12.024ISI: 000315336200021Scopus ID: 2-s2.0-84872480776OAI: oai:DiVA.org:kth-118280DiVA, id: diva2:605733
Anmärkning

QC 20130215

Tillgänglig från: 2013-02-15 Skapad: 2013-02-14 Senast uppdaterad: 2022-06-24Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Sök vidare i DiVA

Av författaren/redaktören
Rashidi, Masoud
Av organisationen
Materialvetenskap
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 184 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf