Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
An investigation on permeability of ceramic foam filters (CFF)
KTH, Skolan för industriell teknik och management (ITM), Materialvetenskap, Tillämpad processmetallurgi.ORCID-id: 0000-0002-7957-348X
2015 (Engelska)Ingår i: TMS Light Metals, 2015, s. 949-954Konferensbidrag, Publicerat paper (Refereegranskat)
Resurstyp
Text
Abstract [en]

CFFs are used to filter liquid metal in the aluminum industry. CFFs are classified in grades or pores per inch (PPI), ranging from 10-100 PPI. Their properties vary in everything from pore and strut size to window size. CFFs of 80-100 PPI are generally not practical for use by industry, as priming of the filters by gravitational forces requires an excessive metal head. Recently, co-authors have invented a method to prime such filters using electromagnetic Lorentz forces, thus allowing filters to be primed with a low metal head. In the continuation of this research work, an improved experimental setup was developed in the present study to validate previous results and to measure the permeability of different filters, as well as a stack of filters. The study of permeability facilitates estimation of the required pressure drop to prime the filters and the head required to generate a given casting rate.

Ort, förlag, år, upplaga, sidor
2015. s. 949-954
Nyckelord [en]
CFF, Filtration, Forchheimer, Permeability, Light metals, Mechanical permeability, Aluminum industry, Casting rate, Ceramic foam filters, Gravitational forces, Pores per inches, Window Size, Metals
Nationell ämneskategori
Signalbehandling Reglerteknik
Identifikatorer
URN: urn:nbn:se:kth:diva-181552Scopus ID: 2-s2.0-84942907016ISBN: 9781119082446 (tryckt)OAI: oai:DiVA.org:kth-181552DiVA, id: diva2:899759
Konferens
Light Metals 2015 - TMS 2015 Annual Meeting and Exhibition, 15 March 2015 through 19 March 2015
Anmärkning

QC 20160226

Tillgänglig från: 2016-02-02 Skapad: 2016-02-02 Senast uppdaterad: 2016-02-26Bibliografiskt granskad
Ingår i avhandling
1. Experimental and Mathematical Study of Incompressible Fluid Flow through Ceramic Foam Filters
Öppna denna publikation i ny flik eller fönster >>Experimental and Mathematical Study of Incompressible Fluid Flow through Ceramic Foam Filters
2016 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Ceramic Foam Filters (CFFs) are widely used to filter solid particles and inclusions from molten metal in metal production, particularly in the aluminum industry. In general, the molten metal is poured on the top of a ceramic foam filter until it reaches a certain height, also known as metal head or gravity head. This is done to build the required pressure to prime the filter media and to initiate filtration. To predict the required metal head, it is necessary to obtain the Darcy and non-Darcy permeability coefficients of the filter. The coefficients vary upon filter type. Here, it is common to classify CFFs based on grades or pore per inches (PPI). These CFFs range from10 to100 PPI and their properties vary in everything from cell and window size to strut size. The 80-100 PPI CFFs are generally not practical for use by industry, since the priming of the filters by a gravitational force requires an excessive metal head. However, recently a new method has been developed to prime such filters by using electromagnetic Lorentz forces. This allows the filters to be primed at a low metal head.

To continue the research work, it was deemed necessary to measure the pressure gradients of single and stack of commercial alumina ceramic foam filters and to obtain the permeability characteristics. Therefore, efforts have been made to validate the previously obtained results, to improve the permeametry experimental setup, and to obtain Darcy and non-Darcy permeability coefficients of single 30, 50, and 80 PPI filters and stacks of filters. Furthermore, the experimentally obtained pressure gradients were analyzed and compered to the mathematically and analytically estimated pressure gradients.

The studies showed that, in permeametry experiments, the sample sealing procedure plays an important role for an accurate estimation of the permeability constants. An inadequate sealing or an un-sealed sample results in an underestimation of the pressure drop, which causes a considerable error in the obtained Darcy and non-Darcy permeability coefficients. Meanwhile, the results from the single filter experiments showed that the permeability values of the similar PPI filters are not identical. However, the stacks of three identical filters gave substantially the same measured pressure drop values and roughly the same Darcy and non-Darcy coefficients as for the single filters.

The permeability coefficients of the filters are believed to be best defined and calculated by using the Forchheimer equation. The well-known and widely used Ergun and Dietrich equations cannot correctly predict the pressure drop unless a correction factor is introduced. The accuracy of the mathematically estimated pressure drop, using COMSOL Multiphysics® 5.1, found to be dependent on the drag term used in the Brinkman-Forchheimer equation.  Unacceptable error, as high as 84 to 89 percent for the 30, 50 and 80 PPI single filters, compared to the experimentally obtained pressure gradient values were observed when the literature defined Brinkman-Forchheimer drag term was used. However, when the same second order drag term (containing the non-Darcy coefficient) as defined in the Forchheimer equation was used, the predicted pressure gradient profiles satisfactorily agreed with the experiment data with as little as 0.3 to 5.5 percent deviations for the 30, 50 and 80 PPI single filters.

Ort, förlag, år, upplaga, sidor
Stockholm: KTH Royal Institute of Technology, 2016. s. xi, 64
Nationell ämneskategori
Materialteknik Metallurgi och metalliska material
Identifikatorer
urn:nbn:se:kth:diva-183031 (URN)978-91-7595-877-4 (ISBN)
Externt samarbete:
Presentation
2016-03-18, M131, Brinellvagen 23, KTH, Stockholm, 14:00 (Engelska)
Opponent
Handledare
Anmärkning

QC 20160226

Tillgänglig från: 2016-02-26 Skapad: 2016-02-25 Senast uppdaterad: 2016-08-26Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Scopus

Personposter BETA

Akbarnejad, Shahin

Sök vidare i DiVA

Av författaren/redaktören
Akbarnejad, Shahin
Av organisationen
Tillämpad processmetallurgi
SignalbehandlingReglerteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 631 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf