Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Experimental Determination of Sulphide Capacities of Blast Furnace Slags with Higher MgO Contents.
KTH, School of Industrial Engineering and Management (ITM), Materials Science and Engineering.
KTH, School of Industrial Engineering and Management (ITM), Materials Science and Engineering, Micro-Modelling.ORCID iD: 0000-0001-5080-8401
KTH, School of Industrial Engineering and Management (ITM), Materials Science and Engineering, Micro-Modelling.ORCID iD: 0000-0002-3548-8638
2017 (English)In: IRONMAKING & STEELMAKINGArticle in journal (Refereed) Published
Abstract [en]

Sulfide capacity measurements of slag with MgO content up to 18 mass% were carried out at 1713, 1743 and 1773 K to obtain reliable data for the blast furnace process.  In the measurement, slag is equilibrated with copper at controlled oxygen partial pressure for 24h. The sulfide capacities are calculated based on the sulfur analyses for both slag and copper. 

Place, publisher, year, edition, pages
Taylor & Francis, 2017.
National Category
Materials Engineering
Research subject
Materials Science and Engineering
Identifiers
URN: urn:nbn:se:kth:diva-228339DOI: 10.1080/03019233.2017.1366089ISI: 000463633600001Scopus ID: 2-s2.0-85028556449OAI: oai:DiVA.org:kth-228339DiVA, id: diva2:1209235
Note

QC 20180522

Available from: 2018-05-22 Created: 2018-05-22 Last updated: 2019-04-29Bibliographically approved
In thesis
1. Study of Sulfide Capacity of Slag and Sulfur Removal from Hot Metal
Open this publication in new window or tab >>Study of Sulfide Capacity of Slag and Sulfur Removal from Hot Metal
2018 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

The present study aims at investigating the desulfurization process in hot metal and sulfide capacity of slags. The missing experimental data of sulfide capacities in Al2O3-CaOMgO-SiO2 system at 1713 K, 1743 K, 1773 K, 1823 K, 1873 K and in the Al2O3-CaO-SiO2 system at 1873 K were investigated under wellcontrolled oxygen potentials. These data along with the reliable and accurate data carefully selected from the literature were employed for KTH model optimization. The model was successfully optimized and produced good predictions of sulfide capacity between 1700 K and 1873 K for all liquid slags in the Al2O3-CaO-MgO-SiO2 system, especially for ladle slags and blast furnace slags, with an average relative deviation of approximately 15%. The partition of sulfur in the blast furnace at tapping was investigated. The results of re-melted slag and hot metal at temperatures of 1743 K and 1773 K showed that the two phases were not in equilibrium with respect to sulfur at tapping. Furthermore, about 30 min was required to reach equilibrium. The optimum equilibrium sulfur partition in the range of blast furnace slag was determined using sulfide capacity data calculated with the newly-optimized model. The results showed clearly that the best area which provides a good equilibrium sulfur partition is between 10 to 14 mass% MgO. The effect of aged CaC2 on the desulfurization of hot metal was investigated at 1673 K and 1773 K. The results show that the use of aged CaC2 does not have significant effect on the desulfurization process since all the samples used exhibited almost the same performance, despite being subject to different aging treatments. The possibility of re-sulfurization during the long waiting time in the transfer ladle before the BOF was investigated. From the results, II different solid phases were found present in the slag along with small portion of liquid slag. In addition, majority of sulfur in the slag is in the solid phase in the form of CaS, which is only a small fraction of the slag. The liquid slag and solid CaS was found to have a limited contact with the hot metal leading to very poor kinetics for re-sulfurization. Therefore, the amount re-sulfurization that is observed in the transfer ladle was found to be very low.

Place, publisher, year, edition, pages
KTH Royal Institute of Technology, 2018. p. 52
Series
TRITA-ITM-AVL ; 2018:29
National Category
Metallurgy and Metallic Materials
Research subject
Metallurgical process science
Identifiers
urn:nbn:se:kth:diva-228348 (URN)978-91-7729-812-0 (ISBN)
Public defence
2018-06-14, F3, Lindstedtsvagen 26, Stockholm, 10:00 (English)
Opponent
Supervisors
Note

QC 20180522

Available from: 2018-05-22 Created: 2018-05-22 Last updated: 2018-05-22Bibliographically approved

Open Access in DiVA

fulltext(747 kB)78 downloads
File information
File name FULLTEXT01.pdfFile size 747 kBChecksum SHA-512
6cbf951c66d9e0a5e43439228eb58c08d614abd4957d66b870e04ff223b3612e724ab02585ac1b9105cbaae0337caf72630063f7a75378131a4b5a6dce1e2368
Type fulltextMimetype application/pdf

Other links

Publisher's full textScopus

Authority records BETA

Condo, Adolfo Firmino TimoteoAllertz, CarlSichen, Du

Search in DiVA

By author/editor
Condo, Adolfo Firmino TimoteoAllertz, CarlSichen, Du
By organisation
Materials Science and EngineeringMicro-Modelling
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 78 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 233 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf