Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Numerical Study of Unsteady Flow Phenomena in a Partial Admission Axial Steam Turbine
KTH, Skolan för industriell teknik och management (ITM), Energiteknik, Kraft- och värmeteknologi.
KTH, Skolan för industriell teknik och management (ITM), Energiteknik, Kraft- och värmeteknologi.
KTH, Skolan för industriell teknik och management (ITM), Energiteknik, Kraft- och värmeteknologi.ORCID-id: 0000-0002-1033-9601
KTH, Skolan för industriell teknik och management (ITM), Energiteknik, Kraft- och värmeteknologi.
2008 (Engelska)Ingår i: Proceedings of ASME Turbo EXPO 2008, New York: AMER SOC MECHANICAL ENGINEERS , 2008, s. 713-722Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

This paper presents a numerical investigation of unsteady flow phenomena in a two-stage partial admission axial steam turbine. Results from unsteady three-dimensional computations are analyzed and compared with the available experimental data. Partial admission in the present study is introduced into the model by blocking only one segmental arc of the inlet guide vanes. Blocking only one segment (which corresponds to the experimental setup) makes the model unsymmetrical; therefore it is necessary to model the whole annulus of the turbine. The first stage rotor blades experience large static pressure change on their surface while passing the blocked channel. The effect of blockage on the rotor blades' surface pressure can be seen few passages around the blocked channel. Strong changes of the blades' surface pressure impose large unsteady forces on the blades of first stage rotor row.

The circumferential static pressure plots at different cross sections along the domain indicate how the non-uniformity propagates in the domain. A peak pressure drop is seen at the cross section downstream of the first stage stator row. At further downstream cross sections, the static pressure becomes more evenly distributed. Entropy generation is higher behind the blockage due to the strong mixing and other loss mechanisms involved with partial admission. Analysis of the entropy plots at different cross sections indicates that the peak entropy moves in a tangential direction while traveling to the downstream stages. Comparisons of the unsteady three-dimensional numerical results and the experimental measurement data show good agreement in tendency. However some differences are seen in the absolute values especially behind the blockage.

Ort, förlag, år, upplaga, sidor
New York: AMER SOC MECHANICAL ENGINEERS , 2008. s. 713-722
Nyckelord [en]
Absolute values, Axial steam turbine, Cross section, Entropy generation, Experimental data, Experimental measurements, Experimental setup, Inlet guide vane, Loss mechanisms, Nonuniformity, Numerical investigations, Numerical results, Numerical studies, Peak pressure, Rotor blades, Static pressure, Strong-mixing, Surface pressures, Tangential directions, Three-dimensional computations, Two stage, Unsymmetrical, Aerodynamics, Engines, Entropy, Fluid dynamics, Marine engines, Pressure effects, Three dimensional, Turbomachine blades, Unsteady flow
Nationell ämneskategori
Maskinteknik
Identifikatorer
URN: urn:nbn:se:kth:diva-13605DOI: 10.1115/GT2008-50538ISI: 000262646400070Scopus ID: 2-s2.0-69949159808ISBN: 978-0-7918-4315-4 (tryckt)OAI: oai:DiVA.org:kth-13605DiVA, id: diva2:326171
Konferens
53rd ASME Turbo Expo 2008 Berlin, GERMANY, JUN 09-13, 2008
Anmärkning
QC 20100622Tillgänglig från: 2010-06-22 Skapad: 2010-06-22 Senast uppdaterad: 2011-09-07Bibliografiskt granskad
Ingår i avhandling
1. Numerical Analysis of Partial Admission in Axial Turbines
Öppna denna publikation i ny flik eller fönster >>Numerical Analysis of Partial Admission in Axial Turbines
2010 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

HTML clipboard Numerical analysis of partial admission in axial turbines is performed in this work. Geometrical details of an existing two stage turbine facility with low reaction blades is used for this purpose. For validation of the numerical results, experimental measurements of one partial admission configuration at design point was used. The partial admission turbine with single blockage had unsymmetrical shape; therefore the full annulus of the turbine had to be modeled numerically.

The numerical grid included the full annulus geometry together with the disc gaps and rotor shrouds. Importance of various parameters in accurate modeling of the unsteady flow field of partial admission turbines was assessed. Two simpler models were selected to study the effect of accurate modeling of radial distribution of flow parameters. In the first numerical model, the computational grid was two dimensional and the radial distribution of flow parameters was neglected. The second case was three-dimensional and full blades’ span height was modeled but the leakage flows at disc cavity and rotor shroud were neglected. Detailed validation of the results from various computational models with the experimental data showed that modeling of the leakage flow at disc cavities and rotor shroud of partial admission turbines has substantial importance in accuracy of numerical computations. Comparison of the results from two computational models with varying inlet extension showed that modeling of the inlet cone has considerable importance in accuracy of results but with increased computational cost.

Partial admission turbine with admission degree of  ε = 0.524 in one blocked arc and two opposing blocked arcs were tested. Results showed that blocking the inlet annulus in one single arc produce better overall efficiency compared to the two blocked arc model. Effect of varying axial gap distance between the first stage stator and rotor rows was also tested numerically for the partial admission turbine with admission degree of  ε = 0.726. Results showed higher efficiency for the reduced axial gap model.

Computations showed that the main flow leave the blade path down to the disc cavity and re-enter into the flow channel downstream the blockage, this flow would pass the rotor with very low efficiency. First stage rotor blades are subject to large unsteady forces due to the non-uniform inlet flow. Plotting the unsteady forces of first stage rotor blades for partial admission turbine with single blockage showed that the blades experience large changes in magnitude and direction while traveling along the circumference. Unsteady forces of first stage rotor blades were plotted in frequency domain using Fourier transform. The largest amplitudes caused by partial admission were at first and second multiples of rotational frequency due to the existence of single blockage and change in the force direction.

Results obtained from the numerical computations showed that the discs have nonuniform pressure distribution especially in the first stage of partial admission turbines. The axial force of the first rotor wheel was considerably higher when the axial gap distance was reduced between the first stage stator and rotor rows. The commercial codes used in this work are ANSYS ICEM-CFD 11.0 as mesh generator and FLUENT 6.3 as flow solver.

Ort, förlag, år, upplaga, sidor
Stockholm: KTH, 2010. s. 114
Serie
Trita-KRV, ISSN 1100-7990 ; 2010:02
Nationell ämneskategori
Energiteknik
Identifikatorer
urn:nbn:se:kth:diva-12856 (URN)978-91-7415-390-3 (ISBN)
Disputation
2010-05-21, Sal M2, Brinellvägen 64, KTH, Stockholm, 10:00 (Engelska)
Opponent
Handledare
Anmärkning
QC20100622Tillgänglig från: 2010-05-17 Skapad: 2010-05-17 Senast uppdaterad: 2010-06-22Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Fridh, Jens

Sök vidare i DiVA

Av författaren/redaktören
Baagherzadeh Hushmandi, NarminHu, JiasenFridh, JensFransson, Torsten
Av organisationen
Kraft- och värmeteknologi
Maskinteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
isbn
urn-nbn

Altmetricpoäng

doi
isbn
urn-nbn
Totalt: 360 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf