Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Experimental investigation of post-dryout heat transfer in annulus with spacers
KTH, Skolan för teknikvetenskap (SCI), Fysik, Reaktorteknologi.ORCID-id: 0000-0001-5595-1952
2007 (Engelska)Ingår i: International Journal of Multiphase Flow, ISSN 0301-9322, E-ISSN 1879-3533, Vol. 33, nr 8, s. 809-821Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Experimental investigations of post-dryout heat transfer in 10 x 22.1 annulus test section with space. rs were carried out in the high-pressure two-phase flow loop at the Royal Institute of Technology (KTH). The test section was manufactured of Inconel 600 to withstand high temperatures. Several thermocouples were installed on tube and rod surfaces to measure the local wall temperature. Measurements were performed for mass flow rate in range from 500 to 2000 kg m(-2) s(-1), with inlet subcooling equal to 10 and 40 K, heat flux in a range from 480 to 1380 kW m(-2) and for the system pressure of 7 MPa. Uniform axial power distributions were applied on rod and tube walls. Using different distributions of heat flux between walls, post-dryout was achieved either on the inner or on the outer wall. The experimental results indicate a very strong influence of spacers on post-dryout heat transfer. For low mass flow rates the wall superheat was significantly reduced downstream of spacers, even though the whole distance between spacers was still under post-dryout conditions when heat flux was high enough. At high mass flow rates and under investigated range of heat flux the dryout patches were effectively quenched downstream of spacers.

Ort, förlag, år, upplaga, sidor
2007. Vol. 33, nr 8, s. 809-821
Nyckelord [en]
heat transfer, post-dryout, spacer influence
Identifikatorer
URN: urn:nbn:se:kth:diva-16857DOI: 10.1016/j.ijmultiphaseflow.2007.02.006ISI: 000248634500001Scopus ID: 2-s2.0-34250876790OAI: oai:DiVA.org:kth-16857DiVA, id: diva2:334900
Anmärkning
QC 20100525Tillgänglig från: 2010-08-05 Skapad: 2010-08-05 Senast uppdaterad: 2017-12-12Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Anglart, Henryk

Sök vidare i DiVA

Av författaren/redaktören
Anglart, Henryk
Av organisationen
Reaktorteknologi
I samma tidskrift
International Journal of Multiphase Flow

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 92 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf