Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Influence of metal carbides on dissolution behavior of biomedical CoCrMo alloy: SEM, TEM and AFM studies
KTH, Skolan för kemivetenskap (CHE), Kemi, Yt- och korrosionsvetenskap.
KTH, Skolan för kemivetenskap (CHE), Kemi, Yt- och korrosionsvetenskap.ORCID-id: 0000-0002-9453-1333
Visa övriga samt affilieringar
2011 (Engelska)Ingår i: Electrochimica Acta, ISSN 0013-4686, E-ISSN 1873-3859, Vol. 56, nr 25, s. 9413-9419Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The influence of precipitate carbides on dissolution tendency and behavior of a biomedical CoCrMo alloy was investigated at microscopic scale. SEM/EDS, TEM/EDS and XRD were performed to characterize crystallographic structure and composition of different precipitate carbides. Scanning Kelvin probe force microscope (SKPFM) was used to evaluate relative nobility of the carbides. In addition to polarization curves, in situ electrochemical AFM (EC-AFM) measurements were performed to investigate the effect of the carbides on local dissolution processes. SEM/EDS, TEM/EDS and XRD characterizations showed non-uniform structure and composition of Cr and Mo carbides. SKPFM analysis suggested the carbide boundaries as preferential sites for corrosion/dissolution process. Cyclic polarization curves of the alloy in phosphate-buffered saline (PBS) solution showed a large current density increase above a certain potential, but only a small hysteresis loop during reverse scan. No noticeable pitting corrosion was observed by SEM after the experiments. In situ AFM images of the sample in PBS showed a stable surface at potentials in the passive region and around the potential corresponding to the current increase and slight etching-like dissolution around the carbides at higher potentials. Carbide boundaries are preferential sites for metal dissolution and carbides with non-uniform composition might exhibit different dissolution rates.

Ort, förlag, år, upplaga, sidor
2011. Vol. 56, nr 25, s. 9413-9419
Nyckelord [en]
CoCrMo alloy, Carbides, TEM, SKPFM, In situ EC-AFM
Nationell ämneskategori
Kemi
Identifikatorer
URN: urn:nbn:se:kth:diva-47972DOI: 10.1016/j.electacta.2011.08.028ISI: 000295997000057Scopus ID: 2-s2.0-80053279459OAI: oai:DiVA.org:kth-47972DiVA, id: diva2:457204
Anmärkning
QC 20111117Tillgänglig från: 2011-11-17 Skapad: 2011-11-15 Senast uppdaterad: 2017-12-08Bibliografiskt granskad
Ingår i avhandling
1. Influence of carbides and nitrides on corrosion initiation of advanced alloys: A local probing study
Öppna denna publikation i ny flik eller fönster >>Influence of carbides and nitrides on corrosion initiation of advanced alloys: A local probing study
2013 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Advanced alloys often present precipitated carbides and nitrides in their microstructure following exposure to elevated temperatures. These secondary phases are usually undesirable, because potentially deleterious for the corrosion and mechanical performances of the material. Carbides and nitrides are enriched in key alloying elements that are subtracted from their surrounding matrix areas, creating alloying element depleted zones, which might become initial sites for corrosion initiation. In this study, the influence of micro- and nano-sized precipitated carbides and nitrides on the corrosion initiation of biomedical CoCrMo alloys and duplex stainless steels has been investigated at microscopic scale, by using a combination of local probing techniques. The microstructures of the alloys were first characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and magnetic force microscopy (MFM). The Volta potential mapping of carbides and nitrides revealed their higher nobility compared to the matrix, and particularly compared to their surrounding areas, suggesting the occurrence of some alloying element depletion in the latter locations, which may lead to a higher susceptibility for corrosion initiation. In-situ electrochemical AFM studies performed at room temperature showed passive behavior for large potential ranges for both alloy families, despite the presence of the precipitated carbides or nitrides. At high anodic applied potential, at which transpassive dissolution occurs, preferential dissolution started from the areas adjacent to the precipitated carbides and nitrides, in accordance with the Volta potential results. Thus, the presence of carbides and nitrides doesn’t largely affect the corrosion resistance of the tested advanced alloys, which maintain passive behavior when exposed to highly concentrated chloride solutions at room temperature with no applied potential. The effect of nitrides on the corrosion initiation of duplex stainless steels was investigated also at temperatures above the critical pitting temperature (CPT). Depending on the type, distribution and size range of the precipitated nitrides different corrosion behaviors were observed. Intragranular (quenched-in) nano-sized nitrides (ca. 50-100 nm) finely dispersed in the ferrite grains have a minor influence on the corrosion resistance of the material at temperatures above the CPT, while larger intergranular (isothermal) nitrides (ca. 80-250 nm) precipitated along the phase boundaries cause a detrimental reduction of the corrosion resistance of the material, in particular of the austenite phase

Ort, förlag, år, upplaga, sidor
Stockholm: KTH Royal Institute of Technology, 2013. s. xiv, 59
Serie
Trita-CHE-Report, ISSN 1654-1081 ; 2013:34
Nyckelord
carbides, nitrides, microstructure, CoCrMo alloys, duplex stainless steels, localized corrosion, transpassive dissoluti on, elemental depletion, AFM, TEM, SEM.
Nationell ämneskategori
Korrosionsteknik
Identifikatorer
urn:nbn:se:kth:diva-129356 (URN)978-91-7501-841-6 (ISBN)
Disputation
2013-10-18, F3, Lindstedtsvägen 26, KTH, Stockholm, 10:00 (Engelska)
Opponent
Handledare
Anmärkning

QC 20130927

Tillgänglig från: 2013-09-27 Skapad: 2013-09-27 Senast uppdaterad: 2013-09-27Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Leygraf, ChristoferPan, Jinshan

Sök vidare i DiVA

Av författaren/redaktören
Bettini, EleonoraLeygraf, ChristoferPan, Jinshan
Av organisationen
Yt- och korrosionsvetenskap
I samma tidskrift
Electrochimica Acta
Kemi

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 212 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf