Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Anti-vibration Engineering in Internal Turning Using a Carbon Nanocomposite Damping Coating Produced by PECVD Process
KTH, Skolan för industriell teknik och management (ITM), Industriell produktion, Maskin- och processteknologi.
KTH, Skolan för elektro- och systemteknik (EES), Rymd- och plasmafysik.ORCID-id: 0000-0001-8591-1003
KTH, Skolan för industriell teknik och management (ITM), Industriell produktion, Maskin- och processteknologi.
2014 (engelsk)Inngår i: Journal of materials engineering and performance (Print), ISSN 1059-9495, E-ISSN 1544-1024, Vol. 23, nr 2, s. 506-517Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Machining dynamic stability has been enhanced through a damping coating based on a novel carbon-based nanocomposite material. The coating was synthesized using a plasma enhanced chemical vapor deposition method, and deposited on to the round-shank boring bar used for internal turning and tested during machining. Comparisons between an uncoated and a coated boring bar were carried out at 0.25 mm and 0.5 mm depth of cut using a five times length to diameter ratio overhang, which are typical conditions known to generate detrimental mechanical vibrations. From sound pressure measurement it was found that the measured absolute sound level during process could be reduced by about 90% when using the tool coated with damping layer. Surface roughness measurements of the processed workpiece showed decreased Ra values from approximately 3-6 mu m to less than 2 mu m (and in 50% of the cases < 1 mu m) when comparing an uncoated standard tool with its coated counterpart. Moreover, it was found that the addition of an anti-vibration coating did not adversely affect other tool properties, such as rigidity and modularity.

sted, utgiver, år, opplag, sider
Springer-Verlag New York, 2014. Vol. 23, nr 2, s. 506-517
Emneord [en]
chatter, machining, vibration damping, coating, PECVD, HIPIMS, metal matrix composite, carbon nanocomposite
HSV kategori
Forskningsprogram
Järnvägsgruppen - Ljud och vibrationer; SRA - Produktion
Identifikatorer
URN: urn:nbn:se:kth:diva-122425DOI: 10.1007/s11665-013-0781-yISI: 000330594800019Scopus ID: 2-s2.0-84893576587OAI: oai:DiVA.org:kth-122425DiVA, id: diva2:622303
Prosjekter
Eurostars Nanocomfort E!4329, Vinnova
Forskningsfinansiär
Vinnova, E!4329XPRES - Initiative for excellence in production research
Merknad

QC 20140228. Updated from submitted to published.

Tilgjengelig fra: 2013-05-21 Laget: 2013-05-21 Sist oppdatert: 2017-12-06bibliografisk kontrollert
Inngår i avhandling
1. Joint Interface Effects on Machining System Vibration
Åpne denne publikasjonen i ny fane eller vindu >>Joint Interface Effects on Machining System Vibration
2013 (engelsk)Licentiatavhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Vibration problems are still the major constraint in modern machining processes that seek higher material removal rate, shorter process time, longer tool life and better product quality. Depending on the process, the weaker structure element can be the tool/tool holder, workpiece/fixture or both. When the tool/tool holder is the main source of vibration, the stability limit is determined in most cases by the ratio of length-to-diameter. Regenerative chatter is the most significant dynamic phenomenon generated through the interaction between machine tool and machining process. As a rule of thumb, the ratio between the tool’s overhang length and the tool’s diameter shouldn’t exceed 4 to maintain a stable machining process while using a conventional machining tool. While a longer tool overhang is needed for specific machining operations, vibration damping solutions are required to ensure a stable machining process. Vibration damping solutions include both active and passive damping solutions. In the passive damping solutions, damping medium such as viscoelastic material is used to transform the vibration strain energy into heat and thereby reduce vibration amplitude. For a typical cantilever tool, the highest oscillation displacement is near the anti-node regions of a vibration mode and the highest oscillation strain energy is concentrated at the node of a vibration mode. Viscoelastic materials have been successfully applied in these regions to exhibit their damping property. The node region of the 1st bending mode is at the joint interfaces where the cantilever tools are clamped. In this thesis, the general method that can be used to measure and characterize the joint interface stiffness and damping properties is developed and improved, joint interfaces’ importance at optimizing the dynamic stiffness of the joint interface is studied, and a novel advancing material that is designed to possess both high young’s modulus and high damping property is introduced. In the joint interface characterization model, a method that can measure the joint interface’s stiffness and damping over the full frequency range with only the assembled structure is presented. With the influence of a joint interface’s normal pressure on its stiffness and damping, an optimized joint interface normal pressure is selected for delivering a stable machining process against chatter with a boring bar setting at 6.5 times overhang length to diameter ratio in an internal turning process. The novel advancing material utilizes the carbon nano particles mixed in a metal matrix, and it can deliver both high damping property and high elastic stiffness to the mechanical structure.

sted, utgiver, år, opplag, sider
Stockholm: KTH Royal Institute of Technology, 2013. s. ix, 48
Serie
TRITA-IIP, ISSN 1650-1888 ; 13:05
Emneord
Joint Interface, Vibration, Damping, Chatter, Machining, Carbon NanoComposite, PECVD, HiPIMS
HSV kategori
Forskningsprogram
SRA - Produktion; Järnvägsgruppen - Ljud och vibrationer
Identifikatorer
urn:nbn:se:kth:diva-122392 (URN)978-91-7501-778-5 (ISBN)
Presentation
2013-05-24, Sal M311, Brinellvägen 68, KTH, Stockholm, 10:00 (engelsk)
Opponent
Veileder
Prosjekter
PoPJIM, HydroMod, XPRES, NanoComfort
Forskningsfinansiär
EU, FP7, Seventh Framework Programme, G62241EU, FP7, Seventh Framework Programme, G62240XPRES - Initiative for excellence in production researchEU, European Research Council, E4329
Merknad

QC 20130521

Tilgjengelig fra: 2013-05-21 Laget: 2013-05-20 Sist oppdatert: 2015-11-11bibliografisk kontrollert
2. High dynamic stiffness nano-structured composites for vibration control: A Study of applications in joint interfaces and machining systems
Åpne denne publikasjonen i ny fane eller vindu >>High dynamic stiffness nano-structured composites for vibration control: A Study of applications in joint interfaces and machining systems
2015 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Vibration control requires high dynamic stiffness in mechanical structures for a reliable performance under extreme conditions. Dynamic stiffness composes the parameters of stiffness (K) and damping (η) that are usually in a trade-off relationship. This thesis study aims to break the trade-off relationship.

After identifying the underlying mechanism of damping in composite materials and joint interfaces, this thesis studies the deposition technique and physical characteristics of nano-structured HDS (high dynamic stiffness) composite thick-layer coatings. The HDS composite were created by enlarging the internal grain boundary surface area through reduced grain size in nano scale (≤ 40 nm). The deposition process utilizes a PECVD (Plasma Enhanced Chemical Vapour Deposition) method combined with the HiPIMS (High Power Impulse Magnetron Sputtering) technology. The HDS composite exhibited significantly higher surface hardness and higher elastic modulus compared to Poly(methyl methacrylate) (PMMA), yet similar damping property. The HDS composites successfully realized vibration control of cutting tools while applied in their clamping interfaces.

Compression preload at essential joint interfaces was found to play a major role in stability of cutting processes and a method was provided for characterizing joint interface properties directly on assembled structures. The detailed analysis of a build-up structure showed that the vibrational mode energy is shifted by varying the joint interface’s compression preload. In a build-up structure, the location shift of vibration mode’s strain energy affects the dynamic responses together with the stiffness and damping properties of joint interfaces.

The thesis demonstrates that it is possible to achieve high stiffness and high damping simultaneously in materials and structures. Analysis of the vibrational strain energy distribution was found essential for the success of vibration control.

sted, utgiver, år, opplag, sider
Stockholm: KTH Royal Institute of Technology, 2015. s. ix, 71
Serie
TRITA-IIP, ISSN 1650-1888
Emneord
Vibration control, High dynamic stiffness, Metal matrix composite, Nano structures, Plasma enhanced chemical vapour deposition (PECVD), High power impulse magnetron sputtering (HiPIMS), Adiabatic, Machining, Regenerative tool chatter
HSV kategori
Forskningsprogram
Industriell produktion
Identifikatorer
urn:nbn:se:kth:diva-176869 (URN)978-91-7595-740-1 (ISBN)
Disputas
2015-12-01, M311, Brinellvägen 68, KTH, Stockholm, 10:00 (engelsk)
Opponent
Veileder
Forskningsfinansiär
EU, FP7, Seventh Framework Programme, 608800EU, FP7, Seventh Framework Programme, 260048VINNOVA, E!4329VINNOVA, HydroMod
Tilgjengelig fra: 2015-11-11 Laget: 2015-11-10 Sist oppdatert: 2015-11-11bibliografisk kontrollert

Open Access i DiVA

fulltext(1196 kB)2467 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 1196 kBChecksum SHA-512
b74fe71006e2e97844eeb86ee43bb360f6547969187381bbc45c3189c6bfc38a8e3ca2b210a1ec46fffec890c8279c750b2765edf5b7520f11f0b6d208cbc90a
Type fulltextMimetype application/pdf

Andre lenker

Forlagets fulltekstScopusPublished version

Personposter BETA

Lundin, Daniel

Søk i DiVA

Av forfatter/redaktør
Fu, QilinLundin, DanielNicolescu, Cornel Mihai
Av organisasjonen
I samme tidsskrift
Journal of materials engineering and performance (Print)

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 2467 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 599 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf