Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Plasma-Facing Components in Tokamaks: Studies of Wall Conditioning Processes and Plasma Impact on Diagnostic Mirrors
KTH, Skolan för elektro- och systemteknik (EES), Fusionsplasmafysik. (Plasma-wall interactions)
2014 (engelsk)Licentiatavhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Understanding of material migration and its impact on the formation of co-deposited mixed material layers on plasma-facing components is essential for the development of fusion reactors. This thesis focuses on this topic. It is based on experiments performed at JET and TEXTOR tokamaks. The major objectives were to determine: (i) fuel and impurity removal from plasma-facing components by ICWC in different gas mixtures, (ii) fuel and impurity transport connected to ICWC operation, (iii) plasma impact on diagnostic mirrors. All these issues are in line with the ITER needs: mitigation of co-deposition and fuel inventory, and the performance of first mirrors in long-term operation. The novelty in research is demonstrated by several elements. In wall conditioning studies, tracer techniques based on injection of rare isotopes (N-15, O-18) were used to determine conclusively the impact of respective gases. Also, a new approach to ICWC was developed by combining global gas balance studies based on mass spectrometry and the use of multiple surface probes exposed to discharges and then studied ex-situ with accelerator-based techniques. Impact of plasma on diagnostic mirrors was determined after exposure to the entire first experimental campaign in JET-ILW.

sted, utgiver, år, opplag, sider
Stockholm: KTH Royal Institute of Technology, 2014. , s. xiv, 44
Serie
TRITA-EE, ISSN 1653-5146 ; 2014:060
Emneord [en]
Plasa-wall interactions, wall conditioning, tracers, diagnostic mirrors, ICWC
HSV kategori
Forskningsprogram
Fysik
Identifikatorer
URN: urn:nbn:se:kth:diva-154621ISBN: 978-91-7595-309-0 (tryckt)OAI: oai:DiVA.org:kth-154621DiVA, id: diva2:758286
Presentation
2014-11-07, Seminar room, Teknikringen 31, KTH- Royal Institute of Technology, Stockholm, 10:00 (engelsk)
Opponent
Veileder
Merknad

QC 20141103

Tilgjengelig fra: 2014-11-03 Laget: 2014-10-26 Sist oppdatert: 2014-11-03bibliografisk kontrollert
Delarbeid
1. Impact of ion cyclotron wall conditioning on fuel removal from plasma-facing components at TEXTOR
Åpne denne publikasjonen i ny fane eller vindu >>Impact of ion cyclotron wall conditioning on fuel removal from plasma-facing components at TEXTOR
Vise andre…
2014 (engelsk)Inngår i: Physica Scripta, ISSN 0031-8949, E-ISSN 1402-4896, Vol. T159, s. 014017-Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Ion cyclotron wall conditioning (ICWC) is based on low temperature and low density plasmas produced and sustained by ion cyclotron resonance (ICR) pulses in reactive or noble gases. The technique is being developed for ITER. It is tested in tokamaks in the presence of toroidal magnetic field (0.2-3.8 T) and heating power of the order of 10(5) W. ICWC with hydrogen, deuterium and oxygen-helium mixture was studied in the TEXTOR tokamak. The exposed samples were pre-characterized limiter tiles mounted on specially designed probes. The objectives were to assess the reduction of deuterium content, the uniformity of the reduction and the retention of seeded oxygen. For the last objective oxygen-18 was used as a marker. ICWC in hydrogen caused a drop of deuterium content in the tile by a factor of more than 2: from 4.5x10(18) to 1.9x10(18) D cm(-2). A decrease of the fuel content by approximately 25% was achieved by the ICWC in oxygen, while no reduction of the fuel content was measured after exposure to discharges in deuterium. These are the first data ever obtained showing quantitatively the local decrease of deuterium in wall components treated by ICWC in a tokamak. The oxygen retention in the tiles exposed to ICWC with oxygen-helium was analyzed for different orientations and radial positions with respect to plasma. An average retention of 1.38x10(16) O-18 cm(-2) was measured. A maximum of the retention, 4.4x10(16) O-18 cm(-2), was identified on a sample surface near the plasma edge. The correlation with the gas inlet and antennae location has been studied.

Emneord
ion cyclotron wall conditioning, plasma-facing components, fuel retention, fuel removal, TEXTOR
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-145840 (URN)10.1088/0031-8949/2014/T159/014017 (DOI)000334847800018 ()2-s2.0-84902191459 (Scopus ID)
Konferanse
14th International Conference on Plasma-Facing Materials and Components for Fusion Applications, PFMC 2013; Julich; Germany; 13 May 2013 through 17 May 2013
Forskningsfinansiär
Swedish Research Council, 621-2009-4138 621-2012-4148
Merknad

QC 20140602

Tilgjengelig fra: 2014-06-02 Laget: 2014-06-02 Sist oppdatert: 2017-12-05bibliografisk kontrollert
2. Self-consistent application of ion cyclotron wall conditioning for co-deposited layer removal and recovery of tokamak operation on TEXTOR
Åpne denne publikasjonen i ny fane eller vindu >>Self-consistent application of ion cyclotron wall conditioning for co-deposited layer removal and recovery of tokamak operation on TEXTOR
Vise andre…
2013 (engelsk)Inngår i: Nuclear Fusion, ISSN 0029-5515, E-ISSN 1741-4326, Vol. 53, nr 12, s. 123001-Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

This paper presents a demonstration experiment of ion cyclotron wall conditioning (ICWC) on TEXTOR covering all ITER wall conditioning aims and discusses the implications for ITER. O-2/He-ICWC applied to erode carbon co-deposits removed 6.6x10(21) C-atoms (39 pulses, 158 s cumulated discharge time). Large oxygen retention (71% of injected oxygen) prevented subsequent ohmic discharge initiation. Plasma operation was recovered by a 1h47 multi-pulse D-2-ICWC procedure including pumping time between pulses with duty cycle of 2 s/20 s, cleaning the vessel from oxygen impurities, followed by a 23 min He-ICWC procedure (2 s/20 s), applied to desaturate the deuterium-loaded walls. A stable ohmic discharge was established on the first attempt right after the recovery procedure. The discharges showed improved density control and only slightly increased oxygen characteristic radiation levels (1-1.5 times). After the recovery procedure 36% of the injected O-atoms remained retained in the vessel, derived from mass spectrometry measurements. This amount is in the estimated range for storage in remote areas obtained from surface analysis of locally exposed samples. The removed amount of oxygen by D-2 and He-ICWC obtained from mass spectrometry corresponds to the retention in plasma-wetted areas estimated by surface analysis. It is concluded that most of the removed oxygen stems from plasma-wetted areas while shadowed areas, e. g. behind poloidal limiters, may feature net retention of the discharge gas. On ITER, designed with a shaped first wall, the ICWC plasma-wetted area will approach the total surface area, reducing consequently the retention in remote areas. A tentative extrapolation of the carbon removal on TEXTOR to tritium removal from co-deposits on ITER in the 39 x 4 s O-2/He-ICWC discharges, including pumping time between the RF pulses, corresponds on ITER to a tritium removal in the order of the estimated retention per 400 s DT-burn (140-500 mgT (Shimada and Pitts 2011 J. Nucl. Mater. 415 S1013-6)).

sted, utgiver, år, opplag, sider
Institute of Physics (IOP), 2013
Emneord
Co-deposited layer, Plasma operations, Poloidal limiters, Recovery procedure, Spectrometry measurements, Tokamak operation, Total surface area, Wall conditioning
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-136992 (URN)10.1088/0029-5515/53/12/123001 (DOI)000327787000003 ()2-s2.0-84888986100 (Scopus ID)
Merknad

QC 20131210

Tilgjengelig fra: 2013-12-10 Laget: 2013-12-10 Sist oppdatert: 2017-12-06bibliografisk kontrollert
3. Nitrogen removal from plasma-facing components by ion cyclotron wall conditioning in TEXTOR
Åpne denne publikasjonen i ny fane eller vindu >>Nitrogen removal from plasma-facing components by ion cyclotron wall conditioning in TEXTOR
Vise andre…
2015 (engelsk)Inngår i: Journal of Nuclear Materials, ISSN 0022-3115, E-ISSN 1873-4820, Vol. 463, s. 688-692Artikkel i tidsskrift (Annet vitenskapelig) Published
Abstract [en]

The efficiency of ion cyclotron wall conditioning (ICWC) in the removal of nitrogen from plasma-facing components in TEXTOR was assessed. In two experiments the wall was loaded with nitrogen and subsequently cleaned by ICWC in deuterium and helium. The retention and removal of nitrogen was studied in-situ by means of mass spectrometry, and ex-situ by surface analysis of a set of graphite, tungsten and TZM plates installed on test limiter systems. N-15 rare isotope was used as a marker. The results from the gas balance showed that about 25% of the retained nitrogen was removed after ICWC cleaning, whereas surface analysis of the plates based on ToF-HIERDA showed an increase of the deposited species after the cleaning. This indicates that during ICWC operation on carbon devices, nitrogen is not only pumped out but also transported to other locations on the wall. Additionally, deuterium surface content was studied before and after ICWC cleaning.

HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-155184 (URN)10.1016/j.jnucmat.2014.11.113 (DOI)000358467200144 ()2-s2.0-84937731653 (Scopus ID)
Forskningsfinansiär
Swedish Research Council, 621-2012-4148
Merknad

Updated from "In press" to "Published". QC 20150901

Tilgjengelig fra: 2014-11-03 Laget: 2014-11-03 Sist oppdatert: 2017-12-05bibliografisk kontrollert
4. An overview of the comprehensive First Mirror Test in JET with ITER-like wall
Åpne denne publikasjonen i ny fane eller vindu >>An overview of the comprehensive First Mirror Test in JET with ITER-like wall
Vise andre…
2014 (engelsk)Inngår i: Physica Scripta, ISSN 0031-8949, E-ISSN 1402-4896, Vol. T159, s. 014011-Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

The First Mirror Test in Joint European Torus (JET) with the International Thermonuclear Experimental Reactor-like wall was performed with polycrystalline molybdenum mirrors. Two major types of experiments were done. Using a reciprocating probe system in the main chamber, a short-term exposure was made during a 0.3 h plasma operation in 71 discharges. The impact on reflectivity was negligible. In a long-term experiment lasting 19 h with 13 h of X-point plasma, 20 Mo mirrors were exposed, including four coated with a 1 mu m-thick Rh layer. Optical performance of all mirrors exposed in the divertor was degraded by up to 80% because of beryllium, carbon and tungsten co-deposits on surfaces. Total reflectivity of most Mo mirrors facing plasma in the main chamber was only slightly affected in the spectral range 400-1600 nm, while the Rh-coated mirror lost its high original reflectivity by 30%, thus decreasing to the level typical of molybdenum surfaces. Specular reflectivity was decreased most strongly in the 250-400 nm UV range. Surface measurements with x-ray photoelectron spectroscopy and depth profiling with secondary ion mass spectrometry and heavy-ion elastic recoil detection analysis (ERDA) revealed that the very surface region on both types of mirrors had been modified by neutrals, resulting eventually in the composition change: Be, C, D at the level below 1x10(16) cm(-2) mixed with traces of Ni, Fe in the layer 10-30 nm thick. On several exposed mirrors, the original matrix material (Mo) remained as the major constituent of the modified layer. The data obtained in two major phases of the JET operation with carbon and full metal walls are compared. The implications of these results for first mirrors and their maintenance in a reactor-class device are discussed.

Emneord
diagnostic mirrors, surface analysis, reflectivity, erosion and deposition, JET, ITER-like wall
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-145842 (URN)10.1088/0031-8949/2014/T159/014011 (DOI)000334847800012 ()2-s2.0-84902125224 (Scopus ID)
Konferanse
14th International Conference on Plasma-Facing Materials and Components for Fusion Applications, PFMC 2013; Julich; Germany; 13 May 2013 through 17 May 2013
Forskningsfinansiär
Swedish Research Council, 621-2009-4138 621-2012-4148
Merknad

QC 20140602

Tilgjengelig fra: 2014-06-02 Laget: 2014-06-02 Sist oppdatert: 2017-12-05bibliografisk kontrollert

Open Access i DiVA

Licentiate Thesis(4769 kB)1090 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 4769 kBChecksum SHA-512
2759aec452c1ae5c92ac32561613169afe1620ae7dd450a4b90afa1aca331bfe2f75865866c0afef9050fbea5579dc4607a76e8c7bf281e3d0fcb57cc6a99130
Type fulltextMimetype application/pdf

Søk i DiVA

Av forfatter/redaktør
García Carrasco, Álvaro
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 1090 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 381 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf