Process simulation of wet filament winding and curing of thick walled cylinders
1992 (English)In: International SAMPE Symposium and Exhibition, SAMPE , 1992, 1132-1145 p.Conference paper (Refereed)
The present work concerns the development of a process model for wet filament winding of thick walled cylinders with a thermoset resin. The model calculates the fiber content, curing degree, temperature, stresses and strains throughout the process. The material laminae data are continuously updated by use of a micro-mechanical model. A reaction kinetics model for the used epoxy resin has been established. Plane compaction data on glassfiber rovings, for different winding angles, have been measured. A software supplied by Stanford University has been used as a basis for the numerical simulation. It has been extensively modified. Measurements have been performed on a 4-axis, numerically controlled winding machine. The experimental results are in good agreement with simulations.
Place, publisher, year, edition, pages
SAMPE , 1992. 1132-1145 p.
International SAMPE Symposium and Exhibition, ISSN 0891-0138 ; 37
Chemical Reactions - Reaction Kinetics, Fibers, Nontextile - Winding, Mathematical Techniques - Numerical Methods, Polymerization - Mathematical Models, Thermosets - Curing
Research subject Solid Mechanics
IdentifiersURN: urn:nbn:se:kth:diva-196713ScopusID: 2-s2.0-0026491418ISBN: 0938994646OAI: oai:DiVA.org:kth-196713DiVA: diva2:1047710
37th International SAMPE Symposium and Exhibition, Anaheim, CA, USA, , 9 March 1992 through 12 March 1992
QC 201611222016-11-182016-11-182016-11-22Bibliographically approved