Change search
ReferencesLink to record
Permanent link

Direct link
Cold compaction of composite powders with size ratio
KTH, Superseded Departments, Solid Mechanics.
KTH, Superseded Departments, Solid Mechanics.ORCID iD: 0000-0001-6232-8819
2004 (English)In: Acta Materialia, ISSN 1359-6454, E-ISSN 1873-2453, Vol. 52, no 7, 1871-1884 p.Article in journal (Refereed) Published
Abstract [en]

Cold compaction of composite powders with size ratio has been analysed in this study using a discrete element method. Powder aggregates consisting of up to 10,000 particles and formed by two powder populations with known material strength and size ratios have been compacted both isostatically and uniaxially. The particles were assumed constitutively to be either perfectly plastic or rigid, and as a result. local contacts between the particles were described by a linear force-displacement relation. The results of this study include the presentation of relevant compaction quantities as a function of densification, and a detailed comparison with previous theoretical. numerical, and experimental studies. Particular emphasis has been placed on investigating the predictive capability of the fundamental assumptions frequently used in theoretical analyses of compaction problems.

Place, publisher, year, edition, pages
2004. Vol. 52, no 7, 1871-1884 p.
Keyword [en]
cold isostatic pressing, composite powder, micromechanical modelling
National Category
Mechanical Engineering
URN: urn:nbn:se:kth:diva-6349DOI: 10.1016/j.actamat.2003.12.026ISI: 000221001300011ScopusID: 2-s2.0-1842450400OAI: diva2:11037
QC 20101007Available from: 2005-09-14 Created: 2005-09-14 Last updated: 2011-10-28Bibliographically approved
In thesis
1. Cold compaction of composite powders
Open this publication in new window or tab >>Cold compaction of composite powders
2005 (English)Doctoral thesis, comprehensive summary (Other scientific)
Abstract [en]

Powder compaction is a production method commonly used in the manufacturing industry today. In order to minimize costly experiments and to optimize serial production of details several methods to analyze the powder compaction process are developed and used. One method is to use micromechanical analysis where the local description of contact between two individual particles is of great importance. In this dissertation a visco-plastic contact law has been used and further developed in order to understand the powder compaction process at packing, low relative density compaction up to high relative density compaction.

In order to relax some assumptions from previous theoretical studies simulation with the discrete element method (DEM) was performed. Up to 10.000 spherical particles were used in packing and early compaction simulation. It was found that rearrangement of particles is one of the major densification mechanisms in the early phases of compaction. At die compaction this effect of rearrangement was shown to be more pronounced than predicted from theoretical analyses. It was also found that the size ratio of particles is of importance when the number fraction of small particles in the compound is high.

The finite element method has been used for numerical analyses to investigate the local contact problem between two particles when self-similarity no longer prevail. Based on the numerical results a suggestion for an approximate compliance relation was made. With this approximate formula the local compliance behaviour between two dissimilar particles was analysed. These findings are directly applicable to simulations with the discrete element method. Finally, an investigation using the finite element method to evaluate the range of the accuracy for theoretical and approximate compliance formula has been done with compounds of different regular lattices. It was found that the range of accuracy is much dependent on the number of contacts within the lattices, specially new forming contacts during the compaction.

Place, publisher, year, edition, pages
Stockholm: KTH, 2005. vii, 15 p.
Trita-HFL. Report / Royal Institute of Technology, Solid mechanics, ISSN 1654-1472 ; 0389
micromechanical modelling, composite powders, descrete element method
National Category
Mechanical Engineering
urn:nbn:se:kth:diva-417 (URN)
Public defence
2005-09-23, Sal B2, Brinellvägen 23, Stockholm, 10:00

QC 20101007

Available from: 2005-09-14 Created: 2005-09-14 Last updated: 2013-01-14Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Skrinjar, OlleLarsson, Per-Lennart
By organisation
Solid Mechanics
In the same journal
Acta Materialia
Mechanical Engineering

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 32 hits
ReferencesLink to record
Permanent link

Direct link