Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Using the SPH method to easier predict wear in machining
KTH, Centres, XPRES, Excellence in production research. Swerea KIMAB AB, Sweden.
KTH, Centres, XPRES, Excellence in production research. Swerea KIMAB AB, Sweden.
2017 (English)In: 16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) / [ed] Outeiro, J Poulachon, G, Elsevier, 2017, p. 317-322Conference paper (Refereed)
Abstract [en]

Usage of FE-models to predict wear is a tricky business. There is the question of material behaviour that gives the loading on the tool. There is the question of wear models and parameters that determine the amount of wear that can be expected for each combination of loadings. And there is the question of FE-specific features like re-mesh or failure modelling in the chip separation zone. The main objective with this paper is to better characterise the wear in numerical simulations by using the SPH modelling technique and determine wear model with wear parameters suitable for such simulations. The SPH(Smoothed Particle Hydrodynamics) modelling technique is used because of its capability to capture large deformations in a consistent way. Wear studies are used as a base for the choice of appropriate simulation based wear model. Two materials with seemingly similar elastic-plastic material behaviour but with distinct different wear behaviour will be compared. Wear can be assumed to derive from the loading on the tool in combination with the surface to surface slip. It is known that a change of failure model and parameter together with friction values used in a simulation yields a change the shape of the chip. And the shape of the chip determines the loading on the tool. Moreover, the wear model that is used in the analysis will capture the the effect of the loading and the combination of the tool-work piece material. The tool-work piece contact is characterised by shear zone where no slip is present followed by an unloading sequence where slip is present with subsequent visible wear. loading patterns from the simulations were consistent with the observed wear and consequently the SPH method was determined as suitable for the task.

Place, publisher, year, edition, pages
Elsevier, 2017. p. 317-322
Series
Procedia CIRP, ISSN 2212-8271 ; 58
Keywords [en]
Machining, Simulation, Wear, Hardening, Plastic, Cutting, Turning, SPH
National Category
Applied Mechanics
Identifiers
URN: urn:nbn:se:kth:diva-211361DOI: 10.1016/j.procir.2017.03.234ISI: 000404958500054OAI: oai:DiVA.org:kth-211361DiVA, id: diva2:1129310
Conference
16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), JUN 15-16, 2017, Cluny, FRANCE
Note

QC 20170802

Available from: 2017-08-02 Created: 2017-08-02 Last updated: 2017-08-02Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full text

Search in DiVA

By author/editor
Stenberg, NiclasBjörk, Thomas
By organisation
XPRES, Excellence in production research
Applied Mechanics

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 19 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf