Nanocomposites of polypropylene and montmorillonite clay can be used in many applications thanks to t heir high thermal stability and mechanical strength . It is of outmost importance that the degradation of these materials can be contr olled and under stood so that t he material can be used for t he exact right application without breakage. Cracking in these nanocomposites while they undergo thermal aging is a fact. The aim of this study was to investigate which parameters that influence the cracking and what can be done to minimize it. Two main parameters have been investigated; the compounding ofthe mat erials and the cooling rate in the processing step. Results showed that the use of a twin-s crew extruder (TSE) provided better results as compared to a microcompounder and that the cooling rate should be fast, to minimize the cracking. The results also show that stainless steel used in the compressionmould ing step has a major impact on the cracking.
Nanokompositer tillverkade av polypropen och montmorillonitlera kan användas i många applikationer tack vare deras höga termiska stabilitet och mekaniska styrka. Det är av största vikt att nedbrytningen av dessa material kan kontrolleras och definieras så att materialet kan användas till exakt rätt applikation utan att haverera. Sprickbildning i dessa nanokompositer är ett faktum. Den här studien undersökte vilka parametrar som påverkar sprickbildningen och vad som kan göras för att minimiera den. Två huvudsakliga parametrar har undersökts; blandningen av materialen och kylningshastigheten i processteget. Resultaten visade att en dubbelskruvextruder är bättre att använda än en liten microcompounder och att kylningshastigheten bör vara snabb för att minimera sprickbildningen. Resultaten visade också att rostfritt stål som används i pressningen av materialet har en större inverkan på sprickbildningen.