Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Survey on Swedish practice for bonded overlays and patch repair
KTH, School of Architecture and the Built Environment (ABE), Civil and Architectural Engineering, Concrete Structures.
2006 (English)In: Concrete repair, rehabilitation and retrofitting: proceedings of the International conference on concrete repair, rehabilitation and retrofitting (ICCRRR), Cape Town, South Africa, 21-23 November, 2005 / [ed] Alexander, Mark G., London: Taylor & Francis Group , 2006, 379-398 p.Conference paper, Published paper (Refereed)
Abstract [en]

Which repair material should be chosen and how to use it are questions that have arosen because of earlier unsuccessful concrete repairs. Several investigations [l-31 stress that the compatibility between the repair material and the old concrete is important, in order to achieve a successhl concrete repair. The lifetime of a concrete construction can be optimised if the repair is done in the right moment and with a correct technique. Costs and natural resources can also be saved with optimal repairs. With thorough investigations and studies of the transition zone between repair material and old concrete and studies of different repair materials understanding for mechanisms and parameters that affect the lifetime of the repair can be achieved. This investigation is a pilot study to the PhD project 'Characteristics of the repair material and the transititon zone between repair material and old concrete'. The objective of this pilot study is to collect existing knowledge and experience by interviewing people working in the area of concrete repairs at SNRA, Swedish National Road Administration, and SNRaA, Swedish National Rail Administration. In order to achive a more complete picture of the repair strategies currently used in Sweden interviews with material producers, contractors and repair consultants were also carried out. The conclusions from these interviews and suggestions for areas that need hrther investigation and research are presented in this paper. The interviews were complemented by a literature review. The whole pilot-study is presented in 'CBI-commision report 2004-56', [4], and was financed by SNRA, SNRaA and CBI.

Place, publisher, year, edition, pages
London: Taylor & Francis Group , 2006. 379-398 p.
National Category
Building Technologies
Identifiers
URN: urn:nbn:se:kth:diva-6848ISBN: 0-415-39654-9 (print)OAI: oai:DiVA.org:kth-6848DiVA: diva2:11671
Conference
International conference on concrete repair, rehabilitation and retrofitting (ICCRRR), Cape Town, South Africa, 21-23 November, 2005
Note
QC 20101129Available from: 2007-03-01 Created: 2007-03-01 Last updated: 2012-02-13Bibliographically approved
In thesis
1. Chloride transport and reinforcement corrosion in the vicinity of the transition zone between substrate and repair concrete
Open this publication in new window or tab >>Chloride transport and reinforcement corrosion in the vicinity of the transition zone between substrate and repair concrete
2006 (English)Licentiate thesis, comprehensive summary (Other scientific)
Abstract [en]

One of the major degradation problems in concrete structures is chloride initiated reinforcement corrosion resulting in cracked, spalled and delaminated concrete. Thesedamages are repaired for large amounts of money and because of high repair costs it is important to perform durable repairs.

This thesis work has included interviews, laboratory and field studies in the area of concrete repairs. The interviews were held mainly with bridge engineers at the Swedish Road Administration and Banverket (the Swedish Railway Administration). The questions asked tothese people were about their experience in the field of concrete repairs. The objective withthe interview study was to collect knowledge and experience about concrete repair at these two governmental authorities.

The main objective of the laboratory study was to investigate chloride transport in the transition zone between a chloride contaminated substrate concrete and an initially chloride free repair concrete by establishing chloride profiles. The second objective was to detect any reinforcement corrosion in relation to the transition zone. The reinforced laboratory specimens with premixed chlorides (1 or 4 wt % per cement) in the substrate concrete have been exposed during 13 years either outdoors or in a climate chamber with relative humidity of 80 %. The main results show that reinforcement corrosion occurred in and near the transition zone in local active areas with passive areas between, macrocell corrosion, and that the chlorides are transported from the contaminated substrate concrete into the repair concrete.

Three different repaired concrete structures, one road bridge, one pedestrian bridge and one parking structure, were investigated in the field study. All three structures are treated with deicing agents in the winter time. The objective with the field study was to investigate if the same phenomenon can be observed as in the laboratory study. The main conclusions, from the investigation on drilled cores from each structure, are that chlorides in contaminated substrate concrete can be transported into a repair concrete and reinforcement corrosion may occur in the transition zone between the two different materials. The results are in accordance with the results in the laboratory study. It was also seen that a repair concrete with relative low w/cratio may reduce the ingress of external chlorides.

Finally, the results in this thesis indicate that there is a risk for reinforcement corrosion in the vicinity of the transition zone between repair concrete and a substrate concrete which must be considered in concrete repair work. For example the chloride content around a repair must not exceed a certain level when a repair is performed. The chloride transport into the repair concrete can be useful to transport chlorides and reduce the content of chlorides in the substrate concrete. The advantages with this are that the amount of removed contaminated substrate concrete can be minimized and the risk for corrosion in the substrate concrete is lower. If the repair concrete is reinforced with conventional black steel there may on the other hand be a risk for corrosion in the repair concrete instead if high levels of chlorides are transported. Also external exposure of chlorides must be considered for the risk of corrosion in the repair material.

Further research is needed about when different corrosion mechanisms and chloride diffusion mechanisms occur in reinforced concrete repairs. The experience from the used analyzing methods in the laboratory investigations are possible to use in coming research projects in the field of concrete repair. The next step after this thesis work should be in order to increase the understanding of the repaired concrete system including the important compatibility issues, the author believes that the most fruitful way consists of further laboratory investigations, field studies and optimisation of the repair material.

Place, publisher, year, edition, pages
Stockholm: KTH, 2006. x, 46 p.
Series
Trita-BKN. Bulletin, ISSN 1103-4270 ; 89
National Category
Building Technologies
Identifiers
urn:nbn:se:kth:diva-4292 (URN)
Presentation
2007-02-23, Sal V22, KTH, Teknikringen 72, Stockholm, 13:00
Opponent
Supervisors
Note
QC 20101129Available from: 2007-03-01 Created: 2007-03-01 Last updated: 2012-02-13Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Skoglund, Pål
By organisation
Concrete Structures
Building Technologies

Search outside of DiVA

GoogleGoogle Scholar

isbn
urn-nbn

Altmetric score

isbn
urn-nbn
Total: 76 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf