Change search
ReferencesLink to record
Permanent link

Direct link
Future 4G front-ends enabling smooth vertical handovers
KTH, School of Information and Communication Technology (ICT), Integrated Devices and Circuits.
Ohio State University.
2006 (English)In: IEEE Circuits & Devices, ISSN 8755-3996, E-ISSN 1558-1888, Vol. 22, no 1, 6-15 p.Article in journal (Refereed) Published
Abstract [en]

An overview is given of the most important effects that handover considerations have on the design of multistandard mobile radio transceivers. Focus is on the multitude of design issues and challenges that should be taken into account in the RF/analog front-end part. Topics discussed include the convergence challenge, wireless transceiver design challenge, wireless standards, handover initiation, interworking between GSM and DECT, idle mode issues, possible issues when mobile terminals miss pages, procedure while in active communication in DECT mode, procedure while in active communication in GSM mode, and GSM/WLAN handover.

Place, publisher, year, edition, pages
2006. Vol. 22, no 1, 6-15 p.
Keyword [en]
Design; Global system for mobile communications; Local area networks; Mobile telecommunication systems; Radio communication; Standards; Interworking; Mobile radio transceivers; Wireless standards
National Category
Engineering and Technology
URN: urn:nbn:se:kth:diva-13973DOI: 10.1109/MCD.2006.1598074ISI: 000235756600003ScopusID: 2-s2.0-33644668527OAI: diva2:328734
QC 20100706Available from: 2010-07-06 Created: 2010-07-06 Last updated: 2010-09-16Bibliographically approved
In thesis
1. Integrated Frequency Synthesis for Convergent Wireless Solutions
Open this publication in new window or tab >>Integrated Frequency Synthesis for Convergent Wireless Solutions
2008 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Wireless transceivers combining several standards in one unit are of key importance. In order to reach the ultimate goal of maximizing the performance-to-cost ratio of such modules, a careful study of the target application, the architecture, and the frequency planning is strongly required. One of the most challenging tasks is the implementation of the frequency synthesizer. This challenge is compounded by the traditional technical difficulties in designing frequency synthesizers as well as the new requirements that include multi-standard support. As a result, studying the upper levels of the communication system becomes mandatory in order to frame the requirements of the frequency synthesizer and to provide a viable solution from a user’s perspective for an always-best-connected scenario. Additionally, the study of the upper layers opens up new opportunities for innovation at the lower layers, especially at the physical layer where the view is traditionally restricted by some harsh requirements whose source might not be clear at least for the physical-level designer. The first aim of this work is to provide a holistic view of how an optimum user experience can be achieved and how this affects the design of frequency synthesizers for the next generation networks. The work is heavily based on the existing garden of wireless standards although it can also serve for other applications such as real software-defined radios and dynamic spectrum allocation. As a result, this work cuts a vertical path starting from the best user experience vision down to the physical layer where it expands on the design of the frequency synthesizer. It proposes a wireless front-end solution that can make the vision of an always-best-connected scenario a reality. The architecture is based on a wireless detector called Sniffer that searches for an alternative connection while the main connection is running. Not only is the Sniffer solution viable at the physical level, but it also provides a stepping stone for development towards fully-enabled multi-standard transceivers. After this, and inline with the previous vision, some important frequency synthesizer parameters are pointed out and enhancements on the phase-locked architectures are presented. This includes ways to extend the range of the frequency synthesizer and ways to make the synthesizer adaptable depending on the requirements of the wireless standards. This work leads directly to the implementation of a multi-standard frequency synthesizer where the details of the top-down design procedure are presented at several levels of abstraction. In order to round-up the work, and due to the fact that the requirements of the frequency synthesizer stretch thin the capabilities of the technology used, calibration techniques to increase the yield of such a complicated sub-system are presented, an important step towards first-pass success.

Place, publisher, year, edition, pages
Stockholm: KTH, 2008. xviii, 182 p.
Trita-ICT-ECS AVH, ISSN 1653-6363 ; 08:07
wireless, transceiver, Bluetooth, DECT, GSM, 3G, LTE, WLAN, WiMAX, multi-standard, vertical handover, Sniffer, frequency synthesizer, phase-locked loop, PLL, sigma-delta, calibration
National Category
Other Electrical Engineering, Electronic Engineering, Information Engineering
urn:nbn:se:kth:diva-9486 (URN)978-91-7415-142-8 (ISBN)
Public defence
2008-11-20, sal D, Forum, KTH, Isafjordsgatan 39, Kista, 14:00 (English)
QC 20100706Available from: 2008-11-10 Created: 2008-11-07 Last updated: 2010-07-06Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Atallah, Jad G.Elnaggar, Mohammed Ismail
By organisation
Integrated Devices and Circuits
In the same journal
IEEE Circuits & Devices
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 83 hits
ReferencesLink to record
Permanent link

Direct link