Change search
ReferencesLink to record
Permanent link

Direct link
Drying of linseed oil wood coatings using reactive diluents
KTH, School of Chemical Science and Engineering (CHE), Fibre and Polymer Technology.ORCID iD: 0000-0003-3201-5138
2005 (English)In: Surface Coatings International Part B - Coatings Transactions, ISSN 1476-4865, Vol. 88, no 2, 119-126 p.Article in journal (Refereed) Published
Abstract [en]

Studies of the drying of two linseed oils with different fatty acid patterns, oil A(74.2% linoleic acid) and oil B (55.2% of linolenic acid), show that the structural variations and the addition of the methyl ester of oil A as a reactive diluent (0, 20 and 40wt%) influenced the drying performance and final film properties of the oils. The incorporation of reactive diluents reduced the effects of surface sealing for oil B at higher temperatures and increased the through-drying rate of oil B. Softer coatings were obtained for both oils when using a reactive diluent. Chemical reactions induced by the wood substrates are shown to affect the drying.

Place, publisher, year, edition, pages
2005. Vol. 88, no 2, 119-126 p.
Keyword [en]
chemiluminescence, oxidative drying of linseed oils, reactive diluents, real-time infrared spectroscopy, wood substrate, linolenic acid, alkyd, paints, mechanisms
URN: urn:nbn:se:kth:diva-14875ISI: 000230189900006ScopusID: 2-s2.0-20444470599OAI: diva2:332916
QC 20100525Available from: 2010-08-05 Created: 2010-08-05Bibliographically approved

Open Access in DiVA

No full text


Search in DiVA

By author/editor
Johansson, Mats K. G.
By organisation
Fibre and Polymer Technology
In the same journal
Surface Coatings International Part B - Coatings Transactions

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 41 hits
ReferencesLink to record
Permanent link

Direct link