Change search
ReferencesLink to record
Permanent link

Direct link
Experimental characterization of wheel-rail contact patch evolution
KTH, School of Industrial Engineering and Management (ITM), Machine Design (Dept.), Tribologi.ORCID iD: 0000-0003-2489-0688
Show others and affiliations
2006 (English)In: Journal of tribology, ISSN 0742-4787, Vol. 128, no 3, 493-504 p.Article in journal (Refereed) Published
Abstract [en]

The contact area and pressure distribution in a wheel/rail contact is essential information required in any fatigue or wear calculations to determine design life, re-grinding, and maintenance schedules. As wheel or rail wear or surface damage takes place the contact patch size and shape will change. This leads to a redistribution of the contact stresses. The aim of this work was to use ultrasound to nondestructively quantify the stress distribution in new, worn, and damaged wheel-rail contacts. The response of a wheel/rail interface to an ultrasonic wave can be modeled as a spring. If the contact pressure is high the interface is very stiff, with few air gaps, and allows the transmission of an ultrasonic sound wave. If the pressure is low, interfacial stiffness is lower and almost all the ultrasound is reflected. A quasistatic spring model was used to determine maps of contact stiffness from wheel/rail ultrasonic reflection data. Pressure was then determined using a parallel calibration experiment. Three different contacts were investigated; those resulting from unused, worn, and sand damaged wheel and rail specimens. Measured contact pressure distributions are compared to those determined using elastic analytical and numerical elastic-plastic solutions. Unused as-machined contact surfaces had similar contact areas to predicted elastic Hertzian solutions. However, within the contact patch, the numerical models better reproduced the stress distribution, as they incorporated real surface roughness effects. The worn surfaces were smoother and more conformal, resulting in a larger contact patch and lower contact stress. Sand damaged surfaces were extremely rough and resulted in highly fragmented contact regions and high local contact stress.

Place, publisher, year, edition, pages
2006. Vol. 128, no 3, 493-504 p.
Keyword [en]
wheel/rail contact, ultrasound, contact pressure, real area of contact, ultrasonic reflection, surfaces, ultrasound, interface, adhesion, area
URN: urn:nbn:se:kth:diva-15929DOI: 10.1115/1.2197523ISI: 000239890300006ScopusID: 2-s2.0-33748320969OAI: diva2:333971
QC 20100525Available from: 2010-08-05 Created: 2010-08-05 Last updated: 2011-12-15Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Olofsson, UlfBjörklund, Stefan
By organisation
TribologiMachine Elements
In the same journal
Journal of tribology

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 62 hits
ReferencesLink to record
Permanent link

Direct link