Change search
ReferencesLink to record
Permanent link

Direct link
Measuring out-of-plane shear properties of paperboard
KTH, School of Engineering Sciences (SCI), Solid Mechanics (Dept.).ORCID iD: 0000-0001-8699-7910
2007 (English)In: Journal of Pulp and Paper Science (JPPS), ISSN 0826-6220, Vol. 33, no 2, 105-109 p.Article in journal (Refereed) Published
Abstract [en]

Two experimental procedures were used to test the shear properties of three paperboards. First, a douhle-notch shear specimen was used. In this test, an in-plane tensile test specimen was utilized. To generate a shear test from the specimen, two notches were cut through the specimen, one from each side of the specimen. This test procedure is simple and easily can be used for production control. Second, a rigid-block shear test was used. In this test, the paper boards were glued with photo-mounting tissue between two steel blocks. The specimen was tested with displacement control in an MTS system. From both shear tests, maximum shear stresses were calculated and compared. It was shown that reproducible results were achieved by both methods.

Place, publisher, year, edition, pages
2007. Vol. 33, no 2, 105-109 p.
Keyword [en]
measurement, paper board properties, shear tests, shear stress, test methods, thickness direction, strength, model
National Category
Materials Engineering
URN: urn:nbn:se:kth:diva-16854ISI: 000248620100009ScopusID: 2-s2.0-34548087515OAI: diva2:334897

QC 20100525

Available from: 2010-08-05 Created: 2010-08-05 Last updated: 2016-05-25Bibliographically approved

Open Access in DiVA

No full text


Search in DiVA

By author/editor
Nygards, MikaelÖstlund, Sören
By organisation
Solid Mechanics (Dept.)
In the same journal
Journal of Pulp and Paper Science (JPPS)
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 77 hits
ReferencesLink to record
Permanent link

Direct link