Change search
ReferencesLink to record
Permanent link

Direct link
Corrugated all-composite sandwich structures. Part 1: Modeling
KTH, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, Lightweight Structures.
KTH, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, Lightweight Structures.ORCID iD: 0000-0002-9744-4550
2009 (English)In: Composites Science And Technology, ISSN 0266-3538, Vol. 69, no 7-8, 913-919 p.Article in journal (Refereed) Published
Abstract [en]

An analytical model for the compressive and shear response of monolithic and hierarchical corrugated composite cores has been developed. The stiffness model considers the contribution in stiffness from the bending- and the shear deformations of the core members in addition to the stretching deformation. The strength model is based on the normal stress and shear stress distribution over each core member when subjected to a shear or compressive load condition. The strength model also accounts for initial imperfections. In part 1 of this series, the analytical model is described and the results are compared to finite element predictions. In part 2, the analytical model is compared to experimental results and the behaviour of the corrugated structures is investigated more thoroughly using failure mechanism maps.

Place, publisher, year, edition, pages
Elsevier, 2009. Vol. 69, no 7-8, 913-919 p.
Keyword [en]
Structural composites, Sandwich structures, Corrugated cores, lattice truss structures, compressive behavior, core, beams, performance, aluminum, collapse, plates
National Category
Composite Science and Engineering
URN: urn:nbn:se:kth:diva-18451DOI: 10.1016/j.compscitech.2008.11.030ISI: 000266380700006ScopusID: 2-s2.0-64849104143OAI: diva2:336498

QC 20100525

Available from: 2010-08-05 Created: 2010-08-05 Last updated: 2015-05-07Bibliographically approved
In thesis
1. Impact Loading of Composite and Sandwich Structures
Open this publication in new window or tab >>Impact Loading of Composite and Sandwich Structures
2010 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Low weight is one of the most important factors in the design process of high speed naval ships, road vehicles and aircrafts. Lower structural weight enables the possibility of down-sizing the propulsion system and thus decrease manufacturing and operating costs as well as reducing the environmental impact.

Two efficient ways of reducing the structural weight of a structure is by using high performance composite materials and by using geometrically efficient structures such as the sandwich concept. In addition to good quasi-static performance different structures have dynamic impact requirements. For a road vehicle this might be crash worthiness, an aircraft has to be able to sustain bird strikes or debris impact and a naval ship needs to be protected against blast or ballistic loading. In this thesis important aspects of dynamic loading of composite and sandwich structures are addressed and presented in the appended papers as follows.

In paper A the notch sensitivity of non-crimp fabric glass bre composites is investigated. The notch sensitivity is investigated for several different laminate con gurations at varying tensile loading rate. It is shown that the non-crimp fabrics have very low notch sensitivity, especially for laminate con gurations with a large amount of bres in the load direction. Further, the notch sensitivity is shown to be fairly constant with increasing loading rates (up to 100/s).

In paper B a heuristic approach is made in order to create an analytical model to predict the residual strength of composite laminates with multiple randomly distributed holes. The basis for this model is a comprehensive experimental programme. It is found that unidirectional laminates with holes predominantly fail through three failure modes: global net-section failure, local net-section failure and local shear failure. Each failure mode can be described by a physical geometric constant which is used to create the analytical model. The analytical model can predict the residual strength of unidirectional laminates with multiple, randomly distributed holes with good accuracy.

In paper C and paper D, novel prismatic high performance all-composite sandwich cores are proposed. In paper C an analytical model is developed that predicts the strength and sti ness properties of the suggested cores. In paper D the prismatic cores are manufactured and tested in shear loading and out-of-plane compression loading. Further, the analytical model is used to create failure mechanism maps to map out the overall behaviour of the different core con gurations. The novel cores show very high speci c strength and sti ness and are potential candidates as cores in high performance naval ship hulls.

In paper E the dynamic properties of prismatic composite cores are investigated. The dynamic out-of-plane strength of an unit cell is tested experimentally in a gas gun - Kolsky bar set-up. Especially, different failure mechanisms and their e ect on the structural strength are investigated. It is found that cores with low relative density (slender core members) show very large inertial stabilisation e ects and have a dynamic strength that can be more than seven times higher than the quasi-static strength. Cores with higher relative density show less increase in dynamic strength. The main reason for the dynamic strengthening is due to the strain rate sensitivity of the parent material rather than inertial stabilisation of the core members.

Place, publisher, year, edition, pages
Stockholm: KTH, 2010. xi, 35 p.
Trita-AVE, ISSN 1651-7660 ; 2010:58
National Category
Fluid Mechanics and Acoustics
urn:nbn:se:kth:diva-25141 (URN)978-91-7415-746-8 (ISBN)
Public defence
2010-11-08, Sal F3, Lindstedtsvägen 26, KTH, Stockholm, 10:15 (English)
QC 20101014Available from: 2010-10-14 Created: 2010-10-11 Last updated: 2012-03-23Bibliographically approved

Open Access in DiVA

fulltext(406 kB)68 downloads
File information
File name FULLTEXT01.pdfFile size 406 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Other links

Publisher's full textScopusSciencedirect

Search in DiVA

By author/editor
Kazemahvazi, SohrabZenkert, Dan
By organisation
Lightweight Structures
In the same journal
Composites Science And Technology
Composite Science and Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 68 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 101 hits
ReferencesLink to record
Permanent link

Direct link