Change search
ReferencesLink to record
Permanent link

Direct link
The effect of surface condition and cold work on the sulphidation resistance of 153MA at 700 degrees C
2000 (English)In: Materials and corrosion - Werkstoffe und Korrosion, ISSN 0947-5117, E-ISSN 1521-4176, Vol. 51, no 5, 313-316 p.Article in journal (Refereed) Published
Abstract [en]

The normal grain sized 153MA-sample experienced an almost linear weight gain curve in the sulphidizing environment while modified materials, with a finer grain size or cold worked structure, displayed more parabolic behaviour and lower weight gains. These effects may be related to more effective Cr-diffusion in the modified samples with a higher Cr-grain boundary diffusion in the fine grain-sample and a higher Cr-bulk diffusion rate in the cold worked sample. The sand blasted sample performed exceedingly well with a thin protective oxide layer compared to the etched and ground samples which both suffered significant weight loss and spalling. The deformed surface structure on the sand blasted sample enhances the Cr-bulk diffusion thus promoting a protective Cr-rich oxide formation.

Place, publisher, year, edition, pages
2000. Vol. 51, no 5, 313-316 p.
Keyword [en]
grain-size, oxidation
URN: urn:nbn:se:kth:diva-19809ISI: 000087452600005OAI: diva2:338501
QC 20100525Available from: 2010-08-10 Created: 2010-08-10Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Szakalos, PeterHertzman, Staffan N.
In the same journal
Materials and corrosion - Werkstoffe und Korrosion

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 25 hits
ReferencesLink to record
Permanent link

Direct link