Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Viscosities of the Quaternary Al2O3-CaO-MgO-SiO2 Slags
KTH, School of Industrial Engineering and Management (ITM), Materials Science and Engineering, Micro-Modelling.
KTH, School of Industrial Engineering and Management (ITM), Materials Science and Engineering, Micro-Modelling.ORCID iD: 0000-0002-3548-8638
2011 (English)In: Steel Research International, ISSN 1611-3683, Vol. 82, no 3, 260-268 p.Article in journal (Refereed) Published
Abstract [en]

Viscosities of some quaternary slags in the Al2O3-CaO-MgO-SiO2 system were measured using the rotating cylinder method. Eight different slag compositions were selected. These slag compositions ranging in the high basicity region were directly related to the secondary steel making operations. The measurements were carried out in the temperature range of 1720 to 1910 K. Viscosities in this system and its sub-systems were expressed as a function of temperature and composition based on the viscosity model developed earlier at KTH. The iso-viscosity contours in the Al2O3-CaO-MgO-SiO2 system relevant to ladle slags were calculated at 1823K and 1873K for 5 mass% MgO and 10 mass% MgO sections. The predicted results showed good agreement with experimental values and the literature data.

Place, publisher, year, edition, pages
2011. Vol. 82, no 3, 260-268 p.
Keyword [en]
Viscosity, Slag, Al2O3-CaO-MgO-SiO2 system, Modelling, Ladle refining
National Category
Mechanical Engineering
Identifiers
URN: urn:nbn:se:kth:diva-27725DOI: 10.1002/srin.201000150ISI: 000289061100014Scopus ID: 2-s2.0-79952211172OAI: oai:DiVA.org:kth-27725DiVA: diva2:380256
Note
QC 20101221Available from: 2010-12-21 Created: 2010-12-21 Last updated: 2011-04-20Bibliographically approved
In thesis
1. A Study on the Correlation between Ladle Glaze and Non-Metallic Inclusions in the Ladle Treatment
Open this publication in new window or tab >>A Study on the Correlation between Ladle Glaze and Non-Metallic Inclusions in the Ladle Treatment
2011 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

In the present thesis, the correlation between ladle glaze and non-metallic inclusions in the ladle treatment was studied. A number of industrial trials with full scale ladle and laboratory works were performed to investigate the inclusions in the ladle treatment.

BaO was used as tracer in the ladle slag to investigate the effect of slag on inclusion composition and the formation of non-metallic inclusions by ladle glaze. BaO was detected in the inclusions of all followed heats. This observation showed strong evidence for the generation of non-metallic inclusions by the ladle glaze. The increase of the fractions of BaO containing inclusions and their average content of BaO in the first heat with tracer suggested that the effect of slag on the composition of inclusions was a very slow process.

The detachment of ladle glaze and the chemical transformations of oxide solution in the MgO matrix were investigated. The experimental results evidently showed that the ladle glaze could be the source of inclusions continually during the ladle treatment. Samples of liquid oxide solution to simulate the liquid oxide inclusions carried over from EAF were equilibrated with molten steel under controlled atmosphere. The results along with thermodynamic calculation suggested that the SiO2 content of inclusions from EAF could be considerably reduced by dissolved aluminium in the steel. This would explain the vanishing of inclusions containing high SiO2 content after deoxidation.

Due to the lack of experimental data, the viscosities of slags in the Al2O3-CaO-MgO-SiO2 system were measured using the rotating cylinder method in the temperature range of 1720 to 1910 K. Eight different slag compositions related to the secondary steel making operations were selected. Viscosities in this system and its sub-systems were expressed as a function of temperature and composition based on the viscosity model developed earlier at KTH.

The activities of oxide components in the Al2O3-CaO-MgO-SiO2 systems at 1873 K were measured by equilibrating liquid slag and metal. Either silicon or copper was used as the metal phase and the oxygen partial pressure was controlled with different mixing rates of Ar and CO gas flow in equilibrium with graphite. Iso-activity lines were drawn from the measured activity values in the isothermal section of the slag systems.

Nine series of industrial trials were carried out using the same ladle in each series to examine the effect of ladle slag on the number of non-metallic inclusions in the next heat. It was found that the number of inclusions increased with SiO2 content of the ladle slag in the previous heat. No clear trends were found for the effects of viscosity and MgO activity of the previous slag on the number of inclusions. Theoretical analysis based on the experimental results suggested that the formation of 2CaO∙SiO2 followed but the dusting of the compound made the refractory more porous, which was reasonable for the number of non-metallic inclusions.

Place, publisher, year, edition, pages
Stockholm: KTH, 2011. v, 59 p.
Keyword
non-metallic inclusions, ladle treatment, ladle glaze, tracer, tool steel, viscosity, activity, modelling, Al2O3-CaO-MgO-SiO2 system
National Category
Materials Engineering
Identifiers
urn:nbn:se:kth:diva-27640 (URN)978-91-7415-841-0 (ISBN)
Public defence
2011-01-28, F3, Lindstedtsvägen 26, KTH, Stockholm, 10:00 (English)
Opponent
Supervisors
Available from: 2010-12-21 Created: 2010-12-17 Last updated: 2010-12-21Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Authority records BETA

Sichen, Du

Search in DiVA

By author/editor
Song, MinhoSichen, Du
By organisation
Micro-Modelling
Mechanical Engineering

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 247 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf