Change search
ReferencesLink to record
Permanent link

Direct link
Monte  Carlo simulation for the prediction of gamma-induced damage in metals  
KTH, School of Engineering Sciences (SCI), Physics, Reactor Physics.
2010 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

Nuclear waste management represents the main problem related to nuclear power generation. The Swedish project for an ultimate nuclear waste repos- itory  is in a very advanced state and cast iron-copper canisters have been designed with the aim of isolating the spent fuel from the environment for at least 105 years.  Neutrons and gamma radiation emitted by the fuel may induce unexpected embrittlement  and impair the container integrity through formation of point  defect clusters and consequent  copper precip- itation.   Gamma radiation induces displacements by interacting with  the container’s metal lattice and creating high energy electrons. To study this container embrittlement, irradiation experiments that make use of high en- ergy electron beams are required.

In order to reproduce the experimental arrangement, a Monte Carlo code named ElectronDamage was developed. The code computes the damage rate induced by a collimated high-energy electron beam on one-dimensional metallic samples and also provides for the damage distribution  as function of depth. The particle energy loss along its trajectory is computed by means of the Bethe-Bloch formula. The scattering cross section and the stopping power are assumed to be constant along the free path.  Collisions against the lattice nuclei are modelled by randomly generating the scattering angle, according to the differential scattering  cross section. A cutoff angle has to be chosen in order to make the cross section function limited and allow for the construction of a PDF. At every collision the exchanged energy is computed. A sharp displacement energy threshold is assumed and the Kinchin-Pease formula is used for the secondary displacement computation.  The energy threshold to produce displacements by electrons is 630 keV in iron.

Test simulations were performed in order to validate the code.  Sim- ulated electron ranges  and backscattering coefficients  were computed for several electron energies and compared with theoretical predictions or semi- experimental values. The comparison  was successful, although it showed that  the code is not suitable for beams below 500 keV. Subsequently,  

a few relevant energies were selected with the aim of reproducing the gamma spectrum emitted by real spent fuel samples. The total damage rates were computed (in  displacements/electron  unit)  and converted into  dpa/year; considerable contributions are given by gamma fluxes whose energy is lower than 2 MeV. The damage rates provided by the literature were satisfactorily close to the computed ones. Displacement distributions presented a peak, which is located near the irradiated surface and moves inwards as the elec- tron energy increases. Finally, a parametric study of the cutoff value showed that its choice does not induce any effect on the total damage rate, whereas it causes a shrinkage of the distribution toward the irradiated surface and a slight increase of the peak value.


Place, publisher, year, edition, pages
2010. , 122 p.
National Category
Physical Sciences
URN: urn:nbn:se:kth:diva-34288OAI: diva2:420212
Educational program
Master of Science in Engineering -Engineering Physics
Physics, Chemistry, Mathematics
Available from: 2011-07-06 Created: 2011-05-31 Last updated: 2011-10-18Bibliographically approved

Open Access in DiVA

fulltext(5568 kB)774 downloads
File information
File name FULLTEXT02.pdfFile size 5568 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Reactor Physics
Physical Sciences

Search outside of DiVA

GoogleGoogle Scholar
Total: 778 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 173 hits
ReferencesLink to record
Permanent link

Direct link