Novel flux modulated positive and negative sequence deadbeat current control of voltage source converters
2006 (English)In: IEEE POWER ENG SOC GEN MEETIN, 2006, 533-540 p.Conference paper (Refereed)
Voltage source converters are widely used in the power system to enhance the power system performance. In the conventional converter control, the control system usually takes the voltage measured at the point where the converter is connected and calculates the reference voltage for the converter; with a modulation system the converter then produces the required 'average voltage'. In this paper, a novel flux modulation scheme, combined with the deadbeat current control strategy, is proposed. The current controller is capable of controlling both positive and negative sequence currents. With flux modulation, the control system measures the bus flux and commands the converter to generate the required flux. The simulation and experimental results presented show a good performance of this converter control system.
Place, publisher, year, edition, pages
2006. 533-540 p.
, IEEE Power Engineering Society General Meeting, ISSN 1932-5517
converter control, deadbeat control, flux modulation, negative sequence current control, VSC, voltage source converter
Other Electrical Engineering, Electronic Engineering, Information Engineering Computer and Information Science
IdentifiersURN: urn:nbn:se:kth:diva-36556DOI: 10.1109/PES.2006.1709230ISI: 000247080001004ScopusID: 2-s2.0-35348896024ISBN: 1424404932;978-142440493-3OAI: oai:DiVA.org:kth-36556DiVA: diva2:430926
General Meeting of the Power-Engineering-Society Montreal, CANADA, JUN 18-22, 2006
QC 201411102011-07-132011-07-132014-11-10Bibliographically approved