High frequency characterization of inkjet printed coplanar waveguides
2008 (English)In: 2008 IEEE Workshop On Signal Propagation On Interconnects, 2008, 170-173 p.Conference paper (Refereed)
This work is focused on frequency domain electrical characterization of ink-jet printed coplanar waveguides (CPWs). The waveguides were designed and printed using conductive nano-silver ink at room temperature and sintered at 300 degrees C. Distributed models, dependent on frequency, have been developed and some relevent parameters such as impedance, attenuation, are derived over frequency band from 30 kHz to 6 GHz. Two different widths of ground planes are investigated to examine the effects on CPW high frequency behaviors. In addition to these the obtained parameters have been compared and validated by theoretical calculations and momentum simulations.
Place, publisher, year, edition, pages
2008. 170-173 p.
Computer and Information Science
IdentifiersURN: urn:nbn:se:kth:diva-38802DOI: 10.1109/SPI.2008.4558383ISI: 000258904100042ScopusID: 2-s2.0-51849107068ISBN: 978-1-4244-2317-0OAI: oai:DiVA.org:kth-38802DiVA: diva2:438124
12th IEEE Workshop on Signal Propagation on Interconnects, SPI; Avignon; 12 May 2008 through 15 May 2008