Zeta-potential and local filtration properties: Constitutive relationships for TiO(2) from experimental filtration measurements
2011 (English)In: Chemical Engineering Science, ISSN 0009-2509, E-ISSN 1873-4405, Vol. 66, no 20, 4573-4581 p.Article in journal (Refereed) Published
The use of filtration to separate solid from liquids is a commonly-used unit operation employed in a range of different applications. The development of accurate models is therefore important in facilitating e.g. design, scale-up and troubleshooting. Accurate constitutive relationships between local filtration properties need to be formulated in order to form precise models of the filtration process. One important parameter that is seldom considered explicitly in filtration models is the inter particle forces, e. g. electrostatic forces. The aim of this study is to investigate local filtration properties, under controlled conditions, for the model material TiO(2) where the zeta-potential, and thereby one important parameter affecting the inter-particle interactions, is altered. In this study the local solidosity is measured during filtration by gamma-attenuation, the local pressure is measured using capillary tubes. These data are used to calculate the local specific filtration resistance. The compressibility of the filtration cake was changed substantially by altering the zeta-potential. Several published constitutive relationships between local data and specific filtration resistance were applied; they yielded very similar parameters that were in good accordance with the characterization of the material.
Place, publisher, year, edition, pages
2011. Vol. 66, no 20, 4573-4581 p.
Filtration, Mathematical modelling, Porous media, Separations, zeta-potential, Local properties
IdentifiersURN: urn:nbn:se:kth:diva-38930DOI: 10.1016/j.ces.2011.06.012ISI: 000294000900012ScopusID: 2-s2.0-80051697958OAI: oai:DiVA.org:kth-38930DiVA: diva2:438731
FunderKnut and Alice Wallenberg FoundationSwedish Research Council