Adhesion in the wheel-rail contact under contaminated conditions
2011 (English)Licentiate thesis, comprehensive summary (Other academic)
Railway vehicles require a certain level of adhesion between wheel and rail to operate efficiently, reliably, and economically. Different levels of adhesion are needed depending on the vehicle running conditions. In the wheel tread–railhead contact, the dominant problem is low adhesion, as low adhesion on the railhead negatively affects railway operation: on one hand, the vehicle will lose traction resulting in delay when driving on low-adhesion tracks; on the other hand, low adhesion during deceleration will extend the braking distance, which is a safety issue.
This thesis examines the influence of several contaminants, i.e., water, oil, and leaves, on the adhesion in the wheel tread–railhead contact. This study will improve our knowledge of the low-adhesion mechanism and of how various contaminants influence adhesion. The thesis consists of a summary overview of the topic and three appended papers (A–C).
Papers A and B focus mainly on water and oil contamination examined using two methods, numerical simulation and lab testing. In paper A, real measured wheel and rail surfaces, low- and high-roughness surfaces, along with generated smooth surfaces are used as input to the numerical model for predicting the adhesion coefficient. Water-lubricated, oil-lubricated, and dry contacts are simulated in the model. In the research reported in paper B, scaled testing using a mini traction machine (MTM) was carried out to simulate the wheel–rail contact under lubricated conditions. Two types of disc surfaces of different roughnesses were run at different contact pressures and temperatures. A stylus machine and atomic force microscopy (AFM) were used to measure the surface topography. A study of leaf contamination on the railhead surface, based on field testing, is presented in paper C. Railhead surface samples were cut and the friction coefficient was measured on five occasions over the course of a year. Electron spectroscopy for chemical analysis (ESCA) and glow discharge optical emission spectrometry (GD-OES) were used to detect the chemical composition of the leaf-contamination layer on the railhead surface.
The main conclusion of the thesis is that different contaminants reduce the adhesion coefficient in different ways. Oil reduces the adhesion coefficient by carrying the normal force due to its high viscosity. Water can reduce the adhesion coefficient to different degrees depending on the surface topography and water temperature. The mixture of an oxide layer and water contamination may have an essential impact. A leaf-formed blackish layer causes low adhesion by means of a chemical reaction between the leaves and bulk material. The thickness of the friction-reducing oxide layer predicts the friction coefficient and the extent of leaf contamination.
Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology , 2011. , 27 p.
Trita-MMK, ISSN 1400-1179 ; 2011:15
adhesion, wheel-rail contact, contaminants, rough surfaces
IdentifiersURN: urn:nbn:se:kth:diva-48441ISBN: 978-91-7501-181-3OAI: oai:DiVA.org:kth-48441DiVA: diva2:457625
2011-12-01, B242, KTH, Brinellvägen, Stockholm, 10:00 (English)
Arteaga, Ines Lopez, Professor
Olofsson, Ulf, Professor
QC 201111232011-11-232011-11-182012-01-27Bibliographically approved
List of papers