System level design of radio frequency receiver for IEEE 802.16 standard
2008 (English)In: 3rd International Design and Test Workshop, 2008, IDT 2008, 2008, 82-86 p.Conference paper (Refereed)
this paper presents a system level design of radio frequency receiver supporting WiMAX mobile standard. Based on direct conversion receiver, the distribution of the total radio system specifications to the individual receiver components is discussed. System level design techniques and theoretical calculation are developed. Simulation results and system simulation level are introduced for noise figure (NF), gain and linearity (third order intercept point, IIP3). Specifications obtained from the received budget can indicate that the noise and the linearity depend on the gain performance of the corresponding circuit blocks. The receiver achieves a total gain of 23dB and an IIP3 of -7.8dBm for low gain mode. It provides up to 68dB gain, 6.5dB noise figure and -16dBm IIP3 for high gain mode.
Place, publisher, year, edition, pages
2008. 82-86 p.
Electrical Engineering, Electronic Engineering, Information Engineering
IdentifiersURN: urn:nbn:se:kth:diva-59500DOI: 10.1109/IDT.2008.4802471ScopusID: 2-s2.0-64849104949ISBN: 978-1-4244-3479-4OAI: oai:DiVA.org:kth-59500DiVA: diva2:475596
IEEE 3rd International Design and Test Workshop, IDT 2008; Monastir; 20 December 2008 through 22 December 2008
QC 201201112012-01-112012-01-112012-01-11Bibliographically approved