Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Evaluation of the low temperature cracking performance of asphalt mixtures utilizing HMA fracture mechanics
KTH, School of Architecture and the Built Environment (ABE), Transport Science, Highway and Railway Engineering.
KTH, School of Architecture and the Built Environment (ABE), Transport Science, Highway and Railway Engineering.ORCID iD: 0000-0002-0596-228X
KTH, School of Architecture and the Built Environment (ABE), Transport Science, Highway and Railway Engineering.ORCID iD: 0000-0003-0889-6078
2013 (English)In: Construction and Building Materials, ISSN 0950-0618, E-ISSN 1879-0526, Vol. 47, 594-600 p.Article in journal (Refereed) Published
Abstract [en]

In the present study, the low temperature cracking performance of asphalt mixture has been investigated numerically and experimentally. To do so, the HMA thermal fracture model has extended by including fracture energy threshold and non-linear thermal contraction coefficient. This extended model is capable to predict thermally induced stress and fracture temperature, which is validated with experimental results obtained from three different types of asphalt mixtures. From the parametric study, it was observed that understanding the influence of thermal contraction coefficient, the cooling rate and the creep compliance parameters can make a significant contribution to the material's sustainability. From the analysis, it was found that this extended model can be utilized to evaluate the low temperature cracking performance of asphalt mixtures and capable to provide correct ranking. Interestingly, non-linear thermal contraction coefficient gave much better prediction than linear approach.

Place, publisher, year, edition, pages
Elsevier, 2013. Vol. 47, 594-600 p.
Keyword [en]
Low temperature cracking, Thermal stress, Fracture temperature, Thermal contraction coefficient, Asphalt mixture
National Category
Infrastructure Engineering
Research subject
SRA - Transport
Identifiers
URN: urn:nbn:se:kth:diva-67173DOI: 10.1016/j.conbuildmat.2013.05.031ISI: 000325232600065Scopus ID: 2-s2.0-84879052134OAI: oai:DiVA.org:kth-67173DiVA: diva2:484800
Projects
T7728
Funder
TrenOp, Transport Research Environment with Novel Perspectives
Note

QC 20131107

Available from: 2012-01-27 Created: 2012-01-27 Last updated: 2017-12-08Bibliographically approved
In thesis
1. Thermally Induced Fracture Performance of Asphalt Mixtures
Open this publication in new window or tab >>Thermally Induced Fracture Performance of Asphalt Mixtures
2012 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

A major distress mode in asphalt pavements is low temperature cracking, which results from the contraction and expansion of the asphalt pavement under extreme temperature changes. The potential for low temperature cracking is an interplay between the environment, the road structure and importantly the properties of the asphalt mixture. The thermal cracking performance of asphalt concrete mixtures can be evaluated by conducting thermal stress restrained specimen tests (TSRST) which is known to be correlated well with the fracture temperatures observed in the field. Although TSRST provides a good estimation of the field performance, it may be unrealistic to implement the obtained results in a design framework. On the other hand, recent studies showed Superpave indirect tension tests can be used to evaluate fracture performance (fatigue, moisture damage, low temperature cracking, etc.) of the asphalt concrete  mixtures. In addition, the obtained elastic and viscoelastic parameters from the Superpave IDT tests can be used as an input parameter to establish a design framework. The study presented in this thesis has a main objective to develop a framework using Superpave IDT test results as input parameters in order to evaluate the low temperature cracking performance of asphalt concrete mixtures. Moreover, the study aims to investigate micro-mechanically the low temperature cracking behavior of bitumen using atomic force microscopy (AFM) as a tool.

The numerical model has been developed by integrating fracture energy threshold into an asphalt concrete thermal fracture model, considering non-linear thermal contraction coefficients. Based on the asphalt concrete mixture viscoelastic properties, this integrated model can predict thermally induced stresses and fracture temperatures. The elastic, viscoelastic and fracture energy input parameters of the model were measured by conducting indirect tension tests and the thermal contraction coefficients were measured experimentally. The proposed model has been validated by comparing the predicted fracture temperatures with the results obtained from TSRST tests. It was found that, while there is a quantitative discrepancy, the predicted ranking was correct. In the measurement of the thermal contraction coefficients it was observed that the thermal contraction coefficient in asphalt concrete is non-linear in the temperature range of interest for low temperature cracking. The implications of having non-linear thermal contraction coefficient were investigated numerically.

In an effort to understand the effect of bitumen properties on low temperature fatigue cracking, AFM was used to characterize the morphology of bitumen. The AFM topographic and phase contrast image confirmed the existence of bee-shaped microstructure and different phases. The bitumen samples were subjected to both environmental and mechanical loading and after loading, micro-cracks appeared in the interfaces of the bitumen surface, confirming bitumen itself may also crack. It was also found that the presence of wax and wax crystallization plays a vital role in low temperature cracking performance of bitumen.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2012. x, 18 p.
Series
Trita-TEC-LIC, ISSN 1653-445X ; 12:006
Keyword
Low temperature cracking, asphalt concrete fracture mechanics, viscoelasticity, non-linear thermal contraction coefficient, atomic force microscopy, wax, wax crystallization
National Category
Infrastructure Engineering
Research subject
SRA - Transport
Identifiers
urn:nbn:se:kth:diva-101384 (URN)978-91-85539-91-8 (ISBN)
Presentation
2012-09-14, B25, Brinellvägen 23, KTH, Stockholm, 09:00 (English)
Opponent
Supervisors
Funder
TrenOp, Transport Research Environment with Novel Perspectives
Note

QC 20120828

Available from: 2012-08-28 Created: 2012-08-27 Last updated: 2012-08-28Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Authority records BETA

Jelagin, DenisBirgisson, Björn

Search in DiVA

By author/editor
Das, Prabir KumarJelagin, DenisBirgisson, Björn
By organisation
Highway and Railway Engineering
In the same journal
Construction and Building Materials
Infrastructure Engineering

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 154 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf