Change search
ReferencesLink to record
Permanent link

Direct link
Oil film thickness and temperature measurements in PTFE and Babbitt faced tilting-pad thrust bearings
Luleå University of Technology, Division of Machine Elements.
2006 (English)In: Proceedings of the 11th Nordic symposium on tribology: NORDTRIB 2004, 2006, Vol. 167-176, 167-176 p.Conference paper (Refereed)
Abstract [en]

The influence of pad facing material on hydrodynamic lubrication in tilting-pad thrust bearings is investigated in terms of pad and oil-film temperatures and thicknesses. Two tilting-pad thrust bearings are examined: one with babbitt pad facing, the other with a layer of PTFE-based composite material. Frictional torque, pad, collar, and oil-film temperatures and thicknesses are all monitored by means of a comprehensive array of sensors mounted in the bearing and shaft. A considerably smaller range of temperature is seen in the steel backing immediately below the surface material for the PTFE faced pads. Oil-film temperatures measured at the mid-point on the pad trailing edge show no significant difference between the two bearings. Oil-film thicknesses in the two bearings are seen to differ. At the leading edge, oil-film thickness is thinner for the PTFE pad than for babbitt. However, at the trailing edge the PTFE pad has the thicker film.

Place, publisher, year, edition, pages
2006. Vol. 167-176, 167-176 p.
National Category
URN: urn:nbn:se:kth:diva-80925OAI: diva2:497107
Nordic Symposium On Tribology 11. Tromsø, Harstad, Hurtigruten, Bodø, Norway. June 1-5 2004
QC 20120525Available from: 2012-02-10 Created: 2012-02-10 Last updated: 2012-05-25Bibliographically approved

Open Access in DiVA

No full text

Other links

Search in DiVA

By author/editor
Glavatskih, Sergei

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 34 hits
ReferencesLink to record
Permanent link

Direct link