Change search
ReferencesLink to record
Permanent link

Direct link
A Face Validated Six Degrees-of-Freedom Haptic Bone Milling Algorithm
KTH, School of Industrial Engineering and Management (ITM), Machine Design (Dept.), Mechatronics.
KTH, School of Industrial Engineering and Management (ITM), Machine Design (Dept.), Mechatronics.ORCID iD: 0000-0002-7550-3134
(English)In: IEEE Transactions on Haptics, ISSN 1939-1412Article in journal (Other academic) Submitted
National Category
Interaction Technologies
URN: urn:nbn:se:kth:diva-90545OAI: diva2:505820
QS 2012 QS 20120326Available from: 2012-02-26 Created: 2012-02-26 Last updated: 2012-03-26Bibliographically approved
In thesis
1. Haptic Milling Simulation in Six Degrees-of-Freedom: With Application to Surgery in Stiff Tissue
Open this publication in new window or tab >>Haptic Milling Simulation in Six Degrees-of-Freedom: With Application to Surgery in Stiff Tissue
2012 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

The research presented in this thesis describes a substantial part of the design of a prototypical surgical training simulator. The results are intended to be applied in future simulators used to educate and train surgeons for bone milling operations. In earlier work we have developed a haptic bone milling surgery simulator prototype based on three degrees-of-freedom force feedback. The contributions presented here constitute an extension to that work by further developing the haptic algorithms to enable six degrees-of-freedom (6-DOF) haptic feedback. Such feedback is crucial for a realistic haptic experience when interacting in a more complex virtual environment, particularly in milling applications.The main contributions of this thesis are:The developed 6-DOF haptic algorithm is based on the work done by Barbic and James, but differs in that the algorithm is modified and optimized for milling applications. The new algorithm handles the challenging problem of real-time rendering of volume data changes due to material removal, while fulfilling the requirements on stability and smoothness of the kind of haptic applications that we approach. The material removal algorithm and the graphic rendering presented here are based on the earlier research. The new 6-DOF haptic milling algorithm is characterized by voxel-based collision detection, penalty-based and constraint-based haptic feedback, and by using a virtual coupling for stable interaction.Milling a hole in an object in the virtual environment or dragging the virtual tool along the surface of a virtual object shall generate realistic contact force and torque in the correct directions. These are important requirements for a bone milling simulator to be used as a future training tool in the curriculum of surgeons. The goal of this thesis is to present and state the quality of a newly developed 6-DOF haptic milling algorithm. The quality of the algorithm is confirmed through a verification test and a face validity study performed in collaboration with the Division of Orthopedics at the Karolinska University Hospital. In a simulator prototype, the haptic algorithm is implemented together with a new 6-DOF haptic device based on parallel kinematics. This device is developed with workspace, transparency and stiffness characteristics specifically adapted to the particular procedure. This thesis is focuses on the 6-DOF haptic algorithm.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2012. x, 85 p.
Trita-STH : report, ISSN 1653-3836 ; 2012:02
Surgical simulation, Virtual reality, Haptic feedback, Surgical training, Medical simulators, 3D visualization, Six degrees-of-freedom, Bone milling
National Category
Interaction Technologies
urn:nbn:se:kth:diva-90547 (URN)978-91-7501-276-6 (ISBN)
Public defence
2012-03-23, B242, Brinellvägen 83, KTH, Stockholm, 14:00 (English)
QC 20120226Available from: 2012-03-01 Created: 2012-02-26 Last updated: 2012-03-01Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Eriksson, MagnusWikander, Jan
By organisation
In the same journal
IEEE Transactions on Haptics
Interaction Technologies

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 95 hits
ReferencesLink to record
Permanent link

Direct link