Change search
ReferencesLink to record
Permanent link

Direct link
Parametric study of bridge response to high speed trains, ballasted track on concrete bridges
KTH, School of Architecture and the Built Environment (ABE), Civil and Architectural Engineering, Structural Engineering and Bridges.
2011 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

When a train enters a bridge, passenger sitting inside will feel a sudden bump in the track, which not only affect the riding comfort of the passengers but also put a dynamic impact on the bridge structure. Due to this impact force, we have very serious maintenance problems in the track close to the bridge structure. This sudden bump is produced when train travelling on the track suddenly hit by a very stiff medium like bridge structure. In order to reduce this effect, transition zones are introduced before the bridge so that the change in stiffness will occur gradually without producing any bump.


This master thesis examine the effect of track stiffness on the bridge dynamic response under different train speeds from 150 to 350 km/h with interval 5 km/h and also estimate the minimum length of transition zones require to reduce the effect of change in stiffness on the bridge. Study also gives us some guidelines about the choice of loading model of the train, location of maximum vertical acceleration, effect of ballast model on the results and minimum length of transition zone needs to include in the bridge-track FE-model, for dynamic analysis of the concrete bridges. To carry out this research MATLAB is used to produce an input file for the ABAQUS FEM program. ABAQUS will first read this file, model the bridge and then analysis the bridge. MATLAB will again read the result file, process the result data and plot the necessary graphs.


The Swedish X2000 train is used for this study, which has been modeled with two different methods: moving load model and sprung mass model, in order to see the difference in results. For verification of the MATLAB-ABAQUS model, a 42m long bridge is analysed and results are compared with known results. In this study, concrete simply supported bridges with spans of 5, 10, 15, 20, 25 m have been analysed.

Place, publisher, year, edition, pages
Trita-BKN-Examensarbete, ISSN 1103-4297 ; 341
Keyword [en]
Ballast stiffness, transition zones, Railway bridges, the Swedish X2000 train, vertical deck acceleration, MATLAB-ABAQUS model, Finite element analysis.
National Category
Infrastructure Engineering
URN: urn:nbn:se:kth:diva-99385ISRN: KTH/BKN/EX-341-SEOAI: diva2:542065
Subject / course
Structural Design and Bridges
Educational program
Master of Science in Engineering - Urban Management
Available from: 2012-09-05 Created: 2012-07-29 Last updated: 2012-09-05Bibliographically approved

Open Access in DiVA

fulltext(2451 kB)4753 downloads
File information
File name FULLTEXT01.pdfFile size 2451 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Structural Engineering and Bridges
Infrastructure Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 4753 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 348 hits
ReferencesLink to record
Permanent link

Direct link