Change search
ReferencesLink to record
Permanent link

Direct link
Low temperature ceramic fuel cells using all nano composite materials
KTH, School of Industrial Engineering and Management (ITM), Energy Technology.
KTH, School of Industrial Engineering and Management (ITM), Energy Technology, Heat and Power Technology.
2012 (English)In: Nano Energy, ISSN 2211-2855, Vol. 1, no 4, 631-639 p.Article in journal (Refereed) Published
Abstract [en]

The shift to low operational temperature of solid oxide or ceramic fuel cells has induced many new concepts and novel technologies. In the present study, fuel cell assembled by all nano composite materials - NiO/Fe 2O 3-SDC anode, SDC-carbonate electrolyte and lithiated NiO/ZnO cathode - is investigated. A range of techniques, i.e., X-ray diffraction (XRD), Scanning electron microscopy (SEM) and electrochemical impedance spectroscopy as well as polarization measurements are employed to characterize the crystalline structures, morphologies and electrochemical properties of the synthesized nanocomposite materials and cells. Performance comparison is made between single cells with and without a pre-sintering process. Finally, single cell short term stability and thermo cycle behaviors are also examined. Combined the facile fabrication process, relative high performance and reasonable stability, the current all nanocomposite system may be a promising functional system for low temperature ceramic fuel cells.

Place, publisher, year, edition, pages
2012. Vol. 1, no 4, 631-639 p.
Keyword [en]
All nano composite, Ceramic fuel cells, In-situ sintering, Solid oxide fuel cells, Thermal cycle stability
National Category
Energy Engineering
URN: urn:nbn:se:kth:diva-100456DOI: 10.1016/j.nanoen.2012.04.004ISI: 000318050300015ScopusID: 2-s2.0-84863782340OAI: diva2:543523
Swedish Research Council, 621-2011-4983Vinnova

QC 20120808

Available from: 2012-08-08 Created: 2012-08-08 Last updated: 2013-11-22Bibliographically approved
In thesis
1. Development and characterization of functional composite materials for advanced energy conversion technologies
Open this publication in new window or tab >>Development and characterization of functional composite materials for advanced energy conversion technologies
2013 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

The solid oxide fuel cell (SOFC) is a potential high efficient electrochemical device for vehicles, auxiliary power units and large-scale stationary power plants combined heat and power application. The main challenges of this technology for market acceptance are associated with cost and lifetime due to the high temperature (700-1000 oC) operation and complex cell structure, i.e. the conventional membrane electrode assemblies. Therefore, it has become a top R&D goal to develop SOFCs for lower temperatures, preferably below 600 oC. To address those above problems, within the framework of this thesis, two kinds of innovative approaches are adopted. One is developing functional composite materials with desirable electrical properties at the reduced temperature, which results of the research on ceria-based composite based low temperature ceramic fuel cell (LTCFC). The other one is discovering novel energy conversion technology - Single-component/ electrolyte-free fuel cell (EFFC), in which the electrolyte layer of conventional SOFC is physically removed while this device still exhibits the fuel cell function. Thus, the focus of this thesis is then put on the characterization of materials physical and electrochemical properties for those advanced energy conversion applications. The major scientific content and contribution to this challenging field are divided into four aspects except the Introduction, Experiments and Conclusions parts. They are:

  1. Continuous developments and optimizations of advanced electrolyte materials, ceria-carbonate composite, for LTCFC. An electrolysis study has been carried out on ceria-carbonate composite based LTCFC with cheap Ni-based electrodes. Both oxygen ion and proton conductance in electrolysis mode are observed. High current outputs have been achieved at the given electrolysis voltage below 600 oC. This study also provides alternative manner for high efficient hydrogen production.
  2.  Compatible and high active electrode development for ceria-carbonate composite electrolyte based LTCFC. A symmetrical fuel cell configuration is intentionally employed. The electro-catalytic activities of novel symmetrical transition metal oxide composite electrode toward hydrogen oxidation reaction and oxygen reduction reaction have been experimentally investigated. In addition, the origin of high activity of transition metal oxide composite electrode is studied, which is believed to relate to the hydration effect of the composite oxide.
  3. A novel all-nanocomposite fuel cell (ANFC) concept proposal and feasibility demonstration. The ANFC is successfully constructed by Ni/Fe-SDC anode, SDC-carbonate electrolyte and lithiated NiO/ZnO cathode at an extremely low in-situ sintering temperature, 600 oC. The ANFC manifests excellent fuel cell performance (over 550 mWcm-2 at 600 oC) and a good short-term operation as well as thermo-cycling stability. All results demonstrated its feasibility and potential for energy conversion.
  4. Fundamental study results on breakthrough research Single-Component/Electrolyte-Free Fuel Cell (EFFC) based on above nanocomposite materials (ion and semi-conductive composite) research activities. This is also the key innovation point of this thesis. Compared with classic three-layer fuel cells, EFFC with an electrolyte layer shows a much simpler but more efficient way for energy conversion. The physical-electrical properties of composite, the effects of cell configuration and parameters on cell performance, materials composition and cell fabrication process optimization, micro electrochemical reaction process and possible working principle were systematically investigated and discussed. Besides, the EFFC, joining solar cell and fuel cell working principle, is suggested to provide a research platform for integrating multi-energy-related device and technology application, such as fuel cell, electrolysis, solar cell and micro-reactor etc.

This thesis provides a new methodology for materials and system innovation for the fuel cell community, which is expected to accelerate the wide implementation of this high efficient and green fuel cell technology and open new horizons for other related research fields.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2013. xv, 60 p.
Trita-KRV, ISSN 1100-7990 ; 13:10
Low temperature ceramic fuel cell, Ceria-carbonate composite, Electrolysis, Transition metal oxide, Symmetrical fuel cells, All-nanocomposite fuel cell, Electrolyte-free fuel cell, Solar cell, ion conductor and semiconductor
National Category
Energy Engineering Nano Technology Composite Science and Engineering Ceramics
Research subject
SRA - Energy
urn:nbn:se:kth:diva-134111 (URN)978-91-7501-827-0 (ISBN)
Public defence
2013-12-13, M3, Brinellvägen 64 Entreplan, KTH, Stockholm, Stockholm, 13:00 (English)
Swedish Research Council, 621-2011-4983EU, FP7, Seventh Framework Programme, TriSOFC project (Contract No.303454)Vinnova

QC 20131122

Available from: 2013-11-22 Created: 2013-11-16 Last updated: 2013-11-22Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Fan, LiangdongZhu, Bin
By organisation
Energy TechnologyHeat and Power Technology
Energy Engineering

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 70 hits
ReferencesLink to record
Permanent link

Direct link