Change search
ReferencesLink to record
Permanent link

Direct link
Building Information Modeling: In the production phase of civil works
KTH, School of Architecture and the Built Environment (ABE), Real Estate and Construction Management.
2012 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

Building Information Modeling, abbreviated BIM, is a process of information sharing which enhances communication and which helps in visualizing complex problems in the building industry. BIM has not been used in a larger extent in the production phase of civil works. The purpose of the study is therefore to investigate driving forces behind the use of BIM and the resistors against it and to investigate in what ways BIM could be used in the production phase.

The theoretical framework is based on one licentiate thesis, two degree projects, three research papers and three books. A qualitative method with semi-structured interviews was used. The interviews were made with a calculator, a supervisor and a CAD planner from Skanska, a constructor and project manager from ELU, a Project Information Officer from Tyréns and a VDC coordinator and VDC business developer from Veidekke who all have been working with BIM. This was to get a good representation from different actors and people with different professional roles.

The study shows that the driving forces behind a use of BIM are that it enhances collaboration and communication between the actors, it makes it easier to visualize the project and the scope, and it provides a higher degree of accuracy of coordination’s. BIM also makes the work more effective and results in fewer errors. Above all, BIM give a possibility for a shorter production phase, shorter total project duration and a lower total cost. The study also shows that the resistors against the use of BIM are employee’s negative attitude against administrative work, that it is hard to measure profitability of using BIM, the uncertainty of who has the legal ownership of the data, and who has the responsibility of the accuracy of it. 3

That the implementation cost and the design phase are more expensive is also a resistor against a use of BIM.

BIM could be used in visualization with 3D models in collision controls and co-reviews in meetings, work preparations and at site. A workplace outline could also be printed from the 3D model to be placed on the site for visualization. 4D scheduling and 4D animations could be used for visualization in meetings, work preparations and at site. The study showed that quantity takeoff and cost estimation with 5D is only reconciled in the meetings in the production phase and that the programs for it are not needed in this phase. RFID tags could be used at site for logistics and tracking materials, and field verifications could be used to verify that a work task is executed according to exact coordination’s in the 3D model. Furthermore tablet computers could be used for bringing the technique of BIM to the site which enables a better understanding of complex work tasks for the workers. A BIM coordinator who understands the process of working with BIM and who could work as a bridge between the users and the technical development team is important in a successful implementation.

The study also shows that the focus of BIM should lie on how to make use of the technique. The examples of how BIM could be used in the production phase of civil works have to be useful and meet the needs and demands of the users. The processes of using 3D models, 4D scheduling, 4D animations, RFID tags, field verifications and tablet computers should therefore be studied thoroughly to find how the technique could be applicable at site, in meetings and work preparations and how it could enhance the daily activities and work tasks. If the demands are met it will be accepted by both the user and the organization. Further research should therefore lie on how 3D models, 4D scheduling, 4D animations, RFID tags, field verifications and tablet computers could be useful in the production phase. These BIM techniques should then be tested on a real project to investigate how the processes could be useful at site, in meetings and in work preparations. Further research should also be made on how countries like Norway, Finland and USA have made use of BIM in the production of civil works.

Place, publisher, year, edition, pages
2012. , 60 p.
Keyword [en]
BIM, VDC, production, civil work, driving force, resistor, usefulness
National Category
Civil Engineering
URN: urn:nbn:se:kth:diva-101091OAI: diva2:546363
Subject / course
Construction Management
Educational program
Master of Science in Engineering - Urban Management
Available from: 2012-08-23 Created: 2012-08-23 Last updated: 2012-08-23Bibliographically approved

Open Access in DiVA

fulltext(755 kB)313 downloads
File information
File name FULLTEXT01.pdfFile size 755 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Real Estate and Construction Management
Civil Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 313 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 746 hits
ReferencesLink to record
Permanent link

Direct link