Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Characterization of machine tool components for drilling operations with intergrated damping system
KTH, School of Industrial Engineering and Management (ITM), Production Engineering.
2011 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

In recent years the control of tool vibration has emerged as the critical area of scientific development. This is because tool vibration creates sound-noise and unwanted quality surface. Mathematically, the observed tool vibration is a ratio of the force acting on the tool to its dynamic stiffness. Because dynamic stiffness is strongly influence by tool damping, the tool vibration could be controlled by enhancing the damping ability of the tooling system. The Department of Production Engineering at KTH has designed new damped drilling tools which absorb the vibratory energy from machining. It is expected that they have better performances than the conventional drilling tools.

In this paper, new drilling tools were tested and compared to conventional ones with Experimental Modal Analysis (EMA) and Machining tests. The natural frequencies, the damping ratios, and mode shapes were detected. Also the drilling tools were tested while mounted in the damped clamping device and the conditional clamping device. Taguchi method was then conducted to find the optimal cutting parameters of each combination of the drilling tool and the clamping device.

The EMA shows that the damped tools have higher damping ratio than the conventional one. In the machining test, damped tools also achieve better quality surface while mounted in the conventional clamp. The damped clamp helps the conventional tool improve the damping ratio significantly; however it does not give any improvement for the damped tool.

Place, publisher, year, edition, pages
2011. , 142 p.
Series
Degree Project in Production Engineering Management, Second Level, 479
National Category
Engineering and Technology
Identifiers
URN: urn:nbn:se:kth:diva-102575OAI: oai:DiVA.org:kth-102575DiVA: diva2:555457
Subject / course
Production Engineering
Educational program
Master of Science - Production Engineering and Management
Uppsok
Technology
Supervisors
Examiners
Available from: 2012-09-20 Created: 2012-09-20 Last updated: 2012-09-20Bibliographically approved

Open Access in DiVA

fulltext(14797 kB)838 downloads
File information
File name FULLTEXT01.pdfFile size 14797 kBChecksum SHA-512
1345611c8f9b6fb91b3016c0db89c5753c03eb6c4ec27a079a321f4bb106fe29fa078819ac1031f99701de74197038a8f645df8d0888cb2ca9fa6544d76937c0
Type fulltextMimetype application/pdf

By organisation
Production Engineering
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
Total: 838 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

urn-nbn

Altmetric score

urn-nbn
Total: 178 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf