Change search
ReferencesLink to record
Permanent link

Direct link
Soil Steel Composite Bridges: A comparison between the Pettersson-Sundquist design method and the Klöppel & Glock design method including finite element modelling
KTH, School of Architecture and the Built Environment (ABE), Civil and Architectural Engineering, Structural Engineering and Bridges.
2012 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

The need of exploring efficient solutions to today’s engineering problems is becoming essential in the current market development. Soil Steel composite bridges (SSCB) are considered well competitive in terms of their feasibility and constructability. The primary objective of this study is to provide a comprehensive comparison study for two known design methods of SSCB, which are the Pettersson-Sundquist design method (developed in Sweden) and the Klöppel & Glock design method (developed in

Germany). Moreover, in the goal of having better behaviour understanding for SSCBs, the study also include finite element modelling (FEM) using PLAXIS 2D of three case studies and compare model results with field measurements.


The design comparison deals with the design concepts, assumptions and limitations for both design methods, where full design procedures are implemented and compared for a defined case study.


The results of the FEM analysis show rational outcome to the field measurements for structural response during backfilling and close results for ordinary loading as well. While the design comparison shows how the different approach in both design methods in limitations and design assumptions has important impact on the results, where soil failure in the Klöppel & Glock design method can be controlling the design for low heights of cover, whereas formation of crown plastic hinge is more controlling in the Pettersson-Sundquist design method. However, and in general, the Pettersson-Sundquist design method require more steel in low heights of cover while it is less demanding for higher soil covers compared to the Klöppel & Glock design method.

Place, publisher, year, edition, pages
Trita-BKN-Examensarbete, ISSN 1103-4297 ; 354
Keyword [en]
Soil-steel, Flexible bridge, Culvert, PLAXIS, Pettersson-Sundquist design method, Swedish design method, Klöppel and Glock.
National Category
Infrastructure Engineering
URN: urn:nbn:se:kth:diva-104429ISRN: KTH/BKN/EX-354-SEOAI: diva2:564528
Subject / course
Structural Design and Bridges
Educational program
Master of Science in Engineering - Urban Management
Available from: 2012-11-05 Created: 2012-11-01 Last updated: 2012-11-06Bibliographically approved

Open Access in DiVA

fulltext(5768 kB)8692 downloads
File information
File name FULLTEXT01.pdfFile size 5768 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Structural Engineering and Bridges
Infrastructure Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 8692 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 437 hits
ReferencesLink to record
Permanent link

Direct link