Analysis of the plastic and elastic energy during the deformation and rupture of a paper sample using thermography
2012 (English)In: Nordic Pulp & Paper Research Journal, ISSN 0283-2631, E-ISSN 2000-0669, Vol. 27, no 2, 329-334 p.Article in journal (Refereed) Published
Thermography has been used to quantitatively analyze the plastic and elastic energy during deformation of paper. Sack paper samples were subjected to uniaxial tensile testing until rupture occurred. The temperature of the sample was simultaneously recorded with an infrared camera. The mechanical energy invested in the deformation was determined based on the force and deformation data. The thermal energy that accumulated in the sample during testing was estimated using the temperature measurements. Here, special attention was put on using the correct emittance values for the sack paper by measuring it with a new method. When comparing exerted mechanical energy with released thermal energy up to the time of sample rupture, about 40% to 60% of the mechanical energy could be detected as thermal energy. The lacking share of heat was most likely lost due to cooling of the sample during the experiments, as a lower share of detected mechanical energy was obtained for longer experiments. When comparing the increase in thermal energy during rupture to the elastic energy stored in the sample, an agreement of better than 90% was found.
Place, publisher, year, edition, pages
2012. Vol. 27, no 2, 329-334 p.
Elastic deformation, Emittance, Paper mechanics, Plastic deformation, Rupture work, Thermal energy, Thermography, Elastic energy, Emittances, Infra-red cameras, Mechanical energies, Paper samples, Sack paper, Uniaxial tensile testing, Deformation, Elasticity, Experiments, Temperature measurement, Tensile testing, Thermography (imaging), Thermography (temperature measurement), Paper, Experimentation, Pyrometry, Tensile Tests, Thermal Analysis
Paper, Pulp and Fiber Technology
IdentifiersURN: urn:nbn:se:kth:diva-104882DOI: 10.3183/NPPRJ-2012-27-02-p329-334ISI: 000315696000022ScopusID: 2-s2.0-84865201840OAI: oai:DiVA.org:kth-104882DiVA: diva2:567807
FunderXPRES - Initiative for excellence in production research
QC 201211142012-11-142012-11-142016-01-22Bibliographically approved