Change search
ReferencesLink to record
Permanent link

Direct link
Analytical Modeling of Iron Lossesfor a PM Traction Machine
KTH, School of Electrical Engineering (EES), Electrical Energy Conversion.
2012 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

Permanent magnet (PM) machines offer several advantages in traction applications such as high efficiencyand high torque per volume ratio. The iron losses in these machines are estimated mostly with empiricallaws taken from other types of machines or with finite element simulations (FEM). In the first part of thisthesis the objective is to define an accurate analytical model for the stator yoke, teeth and rotor of a PMmotor which should work well enough for all operating point (different loads and frequency).This analytical model is found using an iterative process. After building a loss matrix and flux matrix basedon FEM simulations, it is possible to curve fit each of the lines or the rows of the matrix in order to achievethe best fitting for every operating point. This is a very new approach; it was shown that it gives thepossibility, even with a very limited number of FEM simulations, to achieve an accurate estimation of thelosses.The second part of this report focuses on optimizing this analytical method, comparing it with otherpossibilities, analyzing limits and advantages. Special attention is also given to the effects of the losses onthe temperatures in different parts of the machine. In the last part of the thesis, the analytical model isused to test a new control strategy. Its goal is to reduce the total losses of the motor and optimize the ratiobetween torque and total losses for a given driving cycle.

Place, publisher, year, edition, pages
2012. , 75 p.
EES Examensarbete / Master Thesis, XR-EE-E2C 2012:002
Keyword [en]
PM synchronous motor, Iron losses, Driving Cycle, Curve Fitting, Interpolation, Air-gap Flux, MTPA and MTPW
National Category
Electrical Engineering, Electronic Engineering, Information Engineering
URN: urn:nbn:se:kth:diva-105477OAI: diva2:571075
Educational program
Master of Science in Engineering - Electrical Engineering
Available from: 2012-11-21 Created: 2012-11-21 Last updated: 2012-11-21Bibliographically approved

Open Access in DiVA

fulltext(2685 kB)1132 downloads
File information
File name FULLTEXT01.pdfFile size 2685 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Electrical Energy Conversion
Electrical Engineering, Electronic Engineering, Information Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 1132 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 648 hits
ReferencesLink to record
Permanent link

Direct link