Change search
ReferencesLink to record
Permanent link

Direct link
Slow strain rate testing of welded copper
KTH, School of Industrial Engineering and Management (ITM), Materials Science and Engineering. (Materials Technology)
2013 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

In Sweden spent nuclear fuel is planned to be placed 500 m down in the bedrock. The spent nuclear fuel will be contained in copper canisters. The reason behind the selection of copper is its thermodynamic stability against corrosion in the depository. The copper will be exposed to mechanical loading and will be plastically deformed due to creep. The canisters will be sealed by friction stir welding. Since the canisters have to survive intact for many thousands of years, the properties of the welds are critical. Oxygen free P-doped copper (Cu-OFP) is selected for its excellent creep ductility properties and corrosion resistance. In this thesis work creep ductility behavior of friction stir welded copper chosen at different areas of the weld is evaluated by using the test slow strain rate tensile test. Samples are chosen at different weld areas namely weld, cross weld and HAZ. A sum of 21 specimens is tested. These tests are achieved at three various strain rates and each rate are carried out at three different temperatures. The strain rates used for tests are 1e-4, 3e-6 and 1e-7 [1/s]. The samples are strained until rupture, 20% and 5% of the gauge length. Yield strength and tensile strength are usually decreasing with increasing temperature and at higher temperature the material can be easily deformed. Few strange behaviors are also observed for the samples from HAZ areas at strain rate 1e-7[1/s]. The experimental results are justified by using the Knock-Mecking model. The parametersand ω were evaluated by curve fitting method.

Place, publisher, year, edition, pages
2013. , 42 p.
Keyword [en]
copper canister, friction stir welding, slow strain rates, creep test, knock-mecking model
National Category
Materials Engineering
URN: urn:nbn:se:kth:diva-116498OAI: diva2:589952
Educational program
Master of Science - Materials Science and Engineering
2012-12-14, M131 - Conf. Room, Brinellvägen 23, Stockholm, 15:00 (English)
Available from: 2013-02-11 Created: 2013-01-21 Last updated: 2013-02-11Bibliographically approved

Open Access in DiVA

Slow strain rate testing of welded copper(1114 kB)720 downloads
File information
File name FULLTEXT01.pdfFile size 1114 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Materials Science and Engineering
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 720 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 237 hits
ReferencesLink to record
Permanent link

Direct link