Change search
ReferencesLink to record
Permanent link

Direct link
A cavity-wall element for the statistical energy analysis of the sound transmission through double walls
KTH, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, MWL Structural and vibroacoustics.ORCID iD: 0000-0002-9031-3662
KTH, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, Marcus Wallenberg Laboratory MWL.
(English)Manuscript (preprint) (Other academic)
Abstract [en]

The wave motion within a cavity between two flexible walls is first investigated numerically. The results then form the basis for a new SEA formulation in which each element describe one kind of coupled cavity-wall wave motion. This formulation obsoletes the non-resonant transmission path commonly used in SEA of sound transmission and compared to classical formulations it improves results at frequencies around and a bit above the double wall resonance. The new formulation is compared to three sets of measurements found in the literature showing fair agreements.

National Category
Applied Mechanics
URN: urn:nbn:se:kth:diva-118436OAI: diva2:606070
Swedish Research Council, 621-2005-5754EU, FP7, Seventh Framework Programme, 218508

QS 2013

Available from: 2013-04-19 Created: 2013-02-18 Last updated: 2013-04-19Bibliographically approved
In thesis
1. Statistical energy analysis and variational principles for the prediction of sound transmission in multilayered structures
Open this publication in new window or tab >>Statistical energy analysis and variational principles for the prediction of sound transmission in multilayered structures
2013 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Multilayered structures have many application in industry and society: they have peculiar properties and serve a variety of purposes, like structural support, thermal insulation, vibrational and acoustic isolation. This thesis concerns the prediction of sound transmission in multilayered structures. Two problems are herein investigated: the transmission of energy through structures and the transmission of energy along structures. The focus of the analysis is on the mid to high frequency range. To predict sound transmission in these structures, statistical energy analysis (SEA) is used.SEA models are devised for the prediction of the sound reduction index for two kinds of multilayered structures, double-walls used in buildings and trim-panels in vehicles; the double-walls comprise an air cavity in between flat plasterboard or glass plates, whereas the trim-panels a porous layer in between curved aluminium and rubber layers. The SEA models are based upon the wave-types carrying energy. The novelty in these SEAs is an element describing the waves in the air cavity, or in the porous layer, fully coupled to the mass-impeded external layers. Compared to measurements, the proposed SEA performs well: for double-walls, it performs better than previous models; for trim-panels, it is an original result. The parameters of the new SEA element, such as modal density, are derived from the coupling equations describing the fully coupled waves. For double-walls, these equations are derived via Newton's laws. For trim-panels, a variational approach based upon a modified Hamilton's principle valid for non-conservative systems is preferred, because it is a powerful machinery for deriving equations of motion and coupling conditions of a medium as complex as the porous layer. The modified Hamilton's principle for non-conservative systems is based upon a self-adjoint functional analogous to the Lagrangian, inspired by Morse and Feshbach's construction. A self-adjoint variational principle for Biot's equations in the displacement formulation is devised. An equivalent mixed formulation is obtained changing the coordinates of the displacement formulation via Lagrange multipliers. From this mixed formulation, the Lagrangian for a porous material with a limp frame is derived, which yields the continuity of the total displacement of the porous layer. Lagrange multipliers help to obtain the correct coupling functionals between a porous material and a solid. The Lagrange multipliers introducing the continuity of the frame and the solid displacements equal the traction of the in-vacuo frame, thus disappearing if the latter is limp. Measurements to gather material parameters for a Biot model of the porous layer have been conducted.The effects of spatial energy decay in the transmission along structures predicted by SEA is studied: a major effect is the increased relevance of indirect coupling loss factors between SEA elements. This may jeopardize the usefulness of SEA at higher frequencies.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2013. xi, 41 p.
Trita-AVE, ISSN 1651-7660 ; 2013:04
statistical energy analysis, porous materials, biot theory, variational principles, hamilton principle, double walls, multilayered structures
National Category
Fluid Mechanics and Acoustics
Research subject
Järnvägsgruppen - Ljud och vibrationer
urn:nbn:se:kth:diva-118427 (URN)978-91-7501-648-1 (ISBN)
Public defence
2013-03-05, F3, Lindstedtsvägen 26, KTH, Stockholm, 13:15 (English)

QC 20130218

Available from: 2013-02-18 Created: 2013-02-18 Last updated: 2013-02-18Bibliographically approved

Open Access in DiVA

fulltext(1111 kB)386 downloads
File information
File name FULLTEXT01.pdfFile size 1111 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Finnveden, SvanteBarbagallo, Mathias
By organisation
MWL Structural and vibroacousticsMarcus Wallenberg Laboratory MWL
Applied Mechanics

Search outside of DiVA

GoogleGoogle Scholar
Total: 386 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 96 hits
ReferencesLink to record
Permanent link

Direct link