Change search
ReferencesLink to record
Permanent link

Direct link
Development of a control-oriented simulator for a LFR demonstrator
KTH, School of Engineering Sciences (SCI), Physics, Reactor Physics.
2013 (English)In: Nuclear Engineering and Design, ISSN 0029-5493, E-ISSN 1872-759X, Vol. 262, 319-339 p.Article in journal (Refereed) Published
Abstract [en]

In this work, the development of a control-oriented dynamics simulator for a Generation IV Lead-cooled Fast Reactor (LFR) demonstrator has been undertaken aimed at providing a very flexible and straightforward - though accurate - fast-running tool allowing to perform transient design-basis and stability analyses, and laying the foundations for the study of the system control strategy. The simulator, realized in the MATLAB/SIMULINK (R) environment, is composed of five essential parts: core, steam generator, primary pump, collectors, and coolant cold pool. An analytical lumped-parameter core model has been developed to treat the coupling between neutronics and thermal-hydraulics. For the steam generator a moving boundary approach has been adopted, allowing to get the physical behavior while satisfying the controller specifications, besides assuring coherence with the zero-dimensional core modeling. The complete primary loop model has been assembled by connecting the above-mentioned main subsystems through the hot and cold collectors, and by adding the remaining components blocks. Five different transients have been then simulated to analyze the whole system dynamic behavior in a control-oriented perspective: three scenarios have been initiated by acting on the secondary water side (i.e., enhancement of feedwater mass flow rate and temperature, and turbine admission valve coefficient variation), and two by perturbing the primary side nominal state (i.e., simulations of Unprotected Loss of Flow, ULOF and of Unprotected Transient of OverPower, UTOP). As a major outcome, it can be stated that the free dynamics simulations results are very satisfactory, and they may constitute the basis and provide the means for conceiving suitable control strategies for the innovative small-size LFR systems currently under development.

Place, publisher, year, edition, pages
2013. Vol. 262, 319-339 p.
Keyword [en]
Design, Steam, Model, Flow
National Category
Physical Sciences
URN: urn:nbn:se:kth:diva-129109DOI: 10.1016/j.nucengdes.2013.04.027ISI: 000323588700030ScopusID: 2-s2.0-84879107715OAI: diva2:652168

QC 20130930

Available from: 2013-09-30 Created: 2013-09-19 Last updated: 2013-09-30Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Bortot, Sara
By organisation
Reactor Physics
In the same journal
Nuclear Engineering and Design
Physical Sciences

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 34 hits
ReferencesLink to record
Permanent link

Direct link