Change search
ReferencesLink to record
Permanent link

Direct link
KTH, School of Industrial Engineering and Management (ITM), Energy Technology.
2013 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

Improving the climate system of cars is important since it is the largest auxiliary load in a standard vehicle with an increase of fuel consumption by up to 20%. In Electric Vehicles (EV) the range of the car is more limited than in a fossil fueled car; furthermore there is a limited waste heat available from the EV, approximately 2-3kW at 40oC for heating and defogging in winter. The goals of this report have been part of an existing European project (ICE) where the climate system of an electric minibus is being investigated. The specific objectives of this project were to develop a radiation model and integrate it in the existing thermal model of the cabin, validating the new model with existing experimental data, including the thermal model in the overall model of the complete vehicle and to use the existing AC-model to optimize the control with the aim of decreasing the energy consumption maintaining thermal comfort inside the cabin. The radiation model uses total radiation on a horizontal surface in order to calculate the radiation hitting the different parts of the car body and windows, finally the total radiative power entering the minibus is calculated. After including these calculations into the thermal model it could be seen that the results from the model in terms of cabin temperatures fit the experimental values surprisingly well. The control of the AC-system was optimized for a hot and sunny summer day in Italy which resulted in the AC-system working very hard following that the best control strategy was to reduce only the speed of the compressor in order to save energy. Calculations show that in the Normal European Driving Cycle (NEDC) the potential energy savings of following this control strategy can result in an energy saving of the AC-system by up to 27% compared to an unregulated case, with a maintained thermal comfort resulting in 4,2% increase in autonomy.

Place, publisher, year, edition, pages
2013. , 93 p.
Keyword [en]
TRANSIENT THERMAL MODEL OF A MINIBUS' CABIN AND OPTIMIZATION OF THE AIR-CONDITIONING CONTROL STRATEGIES Thermal Model Experiments Validation Electric Car Vapor Vapour Compression Matlab Simulink Trnsys Excel
National Category
Energy Engineering
URN: urn:nbn:se:kth:diva-133449OAI: diva2:661400
Subject / course
Energy Technology
Educational program
Master of Science in Engineering - Mechanical Engineering
2013-10-20, 21:49 (English)
Available from: 2016-08-12 Created: 2013-11-03 Last updated: 2016-08-12Bibliographically approved

Open Access in DiVA

fulltext(4158 kB)7 downloads
File information
File name FULLTEXT01.pdfFile size 4158 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Bjurling, Filip
By organisation
Energy Technology
Energy Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 7 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 3 hits
ReferencesLink to record
Permanent link

Direct link